|
|
|
AKG Acoustics
Power (w/o IEC power cord) for up to 12 microphone units.
Model: CS 5 PS 12
|
|
|
|
|
AKG Acoustics
CU 700 is a fast charger that rapidly charges the rechargeable batteries inside the transmitter without damaging the cells' elements.
Model: CU 700
|
|
|
|
|
AKG Acoustics
Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch.
Model: MPA V L
|
|
|
|
|
AKG Acoustics
Power module for highest flexibility and fixed and mobile installation provides a gold-plated three-pin XLR connector.
Model: PAE M
|
|
|
|
|
AKG Acoustics
Power module for fixed and mobile installation provides a five-pin XLR connector that allows the audio signal and the control voltage for a LED ring to be fed separately.
Model: PAE5 M
|
|
|
|
|
AKG Acoustics
Power programmable module for fixed and mobile installation with its wide voltage range the module will fit most available microphone mixers.
Model: PAESP M
|
|
|
|
|
ALTINEX, Inc.
The MT112-105 is a 1-In, 3-Out AC power distribution card. The MT112-106 is a 1-In, 6-Out AC power distribution card. The MT112-105/106 distributes AC power from a single AC power source to multiple AC outlets.
Model: MT112-105
|
|
|
|
|
ALTINEX, Inc.
The MT112-106 is a 1-In, 6-Out AC power distribution card. The MT112-105 is a 1-In, 3-Out AC power distribution card. The MT112-105/106 distributes AC power from a single AC power source to multiple AC outlets.
Model: MT112-106
|
|
|
|
|
ALTINEX, Inc.
The MT112-107 is a 1-In, 3-Out AC Power Distribution Card with IEC outlets. It allows output on universal IEC female connectors allowing it to plug into specific countries’ power cords such as the ALTINEX PC5302UK, PC5304GR, and PC5303AU. The MT112-107 di
Model: MT112-107
|
|
|
|
|
ALTINEX, Inc.
The MT112-108 is 1-In, 6-Out AC Power Distribution Card with IEC outlets. It allows output on universal IEC female connectors allowing it to plug into specific countries’ power cords such as the ALTINEX PC5302UK, PC5304GR, and PC5303AU. The MT112-108 dist
Model: MT112-108
|
|
|
|
|
AMX
The HPX-P200-AU module provides power connectivity for EU plug types to the HydraPort® chassis.
Model: HPX-P200-AU
|
|
|
|
|
AMX
The HPX-P200-PC-AU module provides power connectivity for AU plug types to the HydraPort® chassis.
Model: HPX-P200-PC-AU
|
|
|
|
|
AMX
The PDXL-2 is a Power over DXLink injector which allows for remote powering of any two DXLink devices by "injecting" power through the twisted pair cable.
Model: PDXL-2
|
|
|
|
|
APC by Schneider Electric
NetShelter AV 42U 600mm Wide x 825mm Deep Enclosure 10-32 Threaded Rails No Sides/Roof/Doors Black
Model: AR3812
|
|
|
|
|
Argent Techno Racking
10A horizontal power board, 12 x AUS 10A 3 pin female outlet, 1 x AUS 10A 3 pin male input.
Model: PB-HOR12-10A
|
|
|
|
|
Argent Techno Racking
15A horizontal power board, 12 x AUS 15A 3 pin female outlet, 1 x AUS 15A 3 pin male input.
Model: PB-HOR12-15A
|
|
|
|
|
Argent Techno Racking
10A horizontal power board, 15 x IEC C13 outlets, 1 x AUS 10A 3 pin male input.
Model: PB-HOR15-IEC
|
|
|
|
|
Argent Techno Racking
10A horizontal power board, 6 x AUS 10A 3 pin female outlet, 1 x AUS 10A 3 pin male input.
Model: PB-HOR6-10A
|
|
|
|
|
Argent Techno Racking
15A horizontal power board, 6 x AUS 15A 3 pin female outlet, 1 x AUS 15A 3 pin male input.
Model: PB-HOR6-15A
|
|
|
|
|
Argent Techno Racking
10A in-post power board, 15 x IEC C13 outlet, 3 x IEC C19 outlet, 1 x AUS 10A 3 pin male input (L/R facing the rack).
Model: PB-IEC-15/3-PL (Left Side)
|
|