Stealth Acoustics - SLR8 8" Stereo Full Range Speaker InfoComm Show 2013
InfoComm13

Stealth Acoustics - SLR8 8" Stereo Full Range Speaker InfoComm Show 2013

Categories

Booth Number: 375
Series: SLR Stereo Full Range Speaker
Model: SLR8

SLR8 8" Stereo Full Range Speaker

The Stealth Acoustics model SLR8 is a dualchannel,two-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area. Installation instructions are shown on a paper overlay that is to be removed before installation. The overlay can also be used as a cutting template for retrofi tting the speakers into existing wallboard. The SLR8 may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods may be supported using special techniques. The Stealth Acoustics SLR8 incorporates an acoustically coupled high quality, high-power 8” cone woofer and two direct coupled 25 mm neo-magnet highfrequency motors. Advanced internal carbon fi ber materials allow for smooth frequency extension to 20 kHz. When the SLR8 is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45 Hz can be achieved. The SLR8 contains independent crossover sections and protection circuits (high-frequency and low-frequency sections) for each channel that automatically reset upon reduction of excessive amplifier power. For proper registration, each speaker must be installed so that the surface of the perimeter edge is flush with the adjoining wallboard. When correctly in place, the surface of the speaker face panel extends above the height of the wallboard by 1/16” (1.6 mm). This is done to allow space for the tape and joint compound needed to blend the panel into the wall. Shims are included to allow for mounting in wallboard thicker than 3/8” (9.5 mm). Stealth Acoustics’ invisibility offers a powerful advantage over traditional loudspeakers because they can be placed wherever they sound best, free of visual concerns that may confl ict with architectural features. Accompanying the full range panels, Stealth Acoustics offers the B22 and B30 – completely invisible companion subwoofers for extended low frequency response. All Stealth Acoustics products are covered by a 5 year manufacturer’s warranty as well as an optional 15 yea
 

Home

Privacy Policy

Contact Us

About the Association

Subscribe

Incorporating Systems
Integration Expo

Useful Links

Become an Exhibitor

Exhibitor List

Exhibitor Services

Floor Plan

Membership

Sponsorship & Advertising

Join Us Online

InfoComm Community Flickr LinkedIn All Voices Blog YouTube Facebook Twitter