The MSW900PAC2 is a 2/3-inch type 16:9/4:3 widescreen camcorder With Case/Vct 14 for the MPEG IMX format, recording 50 Mbs MPEG 4:2:2P@ML, I-frame video. Interlace or progressive recording, switchable to 60i or 30P. Telefile shot metadata system and 4 channels of 20 bit audio recording. Options available include: Video Cache Recording , SDI output, and "Pool Feed" composite input. The MSW-900 can record both 525 (NTSC version) interlaced and progressive scan (480 30P) signals to suit emerging programming needs. The MSW-900 employs a newly developed high-performance Digital Signal Processing LSI. This device provides comprehensive and precise control over the high quality images produced by the camcorder. The MSW-900 employs MPEG 4:2:2P@ML recording, which uses a bit rate of 50 Mb/s to provide outstanding picture quality.
- Newly developed Power HAD™ EX CCD
- New high-performance DSP LSI
- High picture quality using MPEG 4:2:2P@ML 50 Mb/s I-frame compression
- Triple Skin Tone Detail control
- Electronic Soft Focus
- Selectable gamma table
- Multi-matrix function
- TruEye™ processor
- Dual optical filters
- Color temperature control
- Auto Tracing White Balance (ATW)
- Loop/interval recording
- Shot mark and shot data handling
- Tele-File™ system
- Memory Stick™ system stores camera setup parameters
- Turbo Gain
- Assignable function
- Two-channel audio output
- Compact, lightweight and low power consumption
- Extended record times
- Camera control via 8-pin remote connector
- Superb picture and sound quality of the MPEG IMX format
- 12-bit A/D converter
- High-performance Digital Signal Processing camcorder
- Combines digital signal processing camera circuitry with 2/3-inch type 16:9/4:3 widescreen Power HAD EX CCD (each with
one-million picture elements)
- 60 minutes of recording time on a S-cassette
- Analog composite output as standard
-
Continuous Operating Time :
Approx. 135 min w/BP-L60A, Approx. 200 min w/BP-L90A
-
Signal Input - Genlock Video :
BNC type x1, 1.0 Vp-p, 75 §Ù
-
Signal Input - Time Code :
BNC type x1, 0.5 to 18 Vp-p, 10 k§Ù
-
Signal Input - Audio (CH-1/2) :
XLR-3-31 type x2, -60 dBm/+4 dBm selectable, high impedance, balanced
-
Signal Input - Mic :
XLR-3-31 type x2, -60 dBm/+4 dBm selectable, high impedance, balanced
-
Signal Output - Video :
BNC type x1, 1.0 Vp-p, 75 §Ù
-
Signal Output - Video Test :
BNC type x1, 1.0 Vp-p, 75 §Ù
-
Signal Output - Time Code :
BNC type x1, 1.0 Vp-p, 75 §Ù
-
Signal Output - Earphone :
Minijack x2
-
Signal Output - Audio output (CH-1/CH-2) :
XLR-5-pin male (stereo)
-
Lens :
12-pin
-
Remote :
8-pin
-
Light :
2-pin, DC 12 V, max. 50 W
-
DC Input :
XLR-4-pin (for the optional AC-550/550CE)
-
DC Output :
4-pin (for wireless microphone receiver), DC 12 V
-
Camcorder Adapter :
40-pin
-
Wireless Receiver Input :
D-Sub 15-pin
-
VTR - Recording Format :
MPEG IMX
-
VTR - Tape Speed :
53.776 mm/s
-
VTR - Playback/Recording Time :
Max. 71 minutes w/BCT-60MX cassette
-
VTR - Fast Forward Time :
Approx. 5 minutes w/BCT-60MX
-
VTR - Rewind Time :
Approx. 5 minutes w/BCT-60MX
-
VTR - Recommended Tape :
Sony MPEG IMX S cassette (BCT-6MX/12MX/22MX/32MX/60MX)
-
Digital Video Performance - Sampling Frequency :
Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
-
Digital Video Performance - Quantization :
8 bits/sample
-
Digital Video Performance - Error correction :
Reed-Solomon code
-
Digital Video Performance - K-factor (2T pulse) :
Less than 1 %
-
Digital Video Performance - Y/R-Y/B-Y delay :
Less than 15 ns
-
Digital Audio Performance - Sampling Frequency :
48 kHz (synchronised with video)
-
Digital Audio Performance - Quantization :
20/16 bits/sample (selectable)
-
Digital Audio Performance - A/D and D/A Quantization :
A/D:20 bits/sample, D/A:16 bits/sample
-
Digital Audio Performance - Frequency Response :
20 Hz to 20 kHz, +0.5 dB/-1.0 dB
-
Digital Audio Performance - Dynamic Range :
More than 85 dB emphasis ON)
-
Digital Audio Performance - Distortion :
Less than 0.08 % At 1 kHz, emphasis ON, reference level
-
Digital Audio Performance - Cross Talk :
Less than -70 dB At 1 kHz, reference level
-
Digital Audio Performance - Wow & Flutter :
Below measurable limit
-
Digital Audio Performance - Head Room :
20 dB ex-factory setting
-
Digital Audio Performance - Emphasis :
T1=50 micro s, T2=15 micro s ON/OFF selectable
-
Camera - Pickup Device :
3-chip 2/3-inch type 16:9 widescreen Power HAD EX CCD
-
Camera - Total Picture Elements :
1038(H) x 1188(V)
-
Camera - Optical System :
F1.4 prism
-
Camera - Built-in Optical Filters :
1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND, A: CROSS, B: 3200K, C: 4300K, D: 6300K
-
Camera - Shutter Speed :
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 second
-
Camera - Lens Mount :
Special bayonet mount
-
Camera - Sensitivity :
F11 (typical) (2000 lx, 89.9% reflectance)
-
Camera - Minimum Illumination :
Approx. 0.15 lx F1.4 lens, +48 dB turbo gain
-
Camera - Smear level :
-140 dB typical
-
Camera - S/N ratio :
-63 dB typical
-
Camera - Vertical Resolution :
480 TV Lines/530 TV Lines(EVS)
-
Camera - Registration :
0.05 % All zones, w/o lens)
-
Camera - Geometric Distortion :
Below measurable level (w/o lens)
-
Camera - Warm-up Time :
2 second
-
Camera - Modulation depth at 5MHz :
70 % (16:9, typical)/55%(4:3, typical)
-
Power Requirements :
DC 12 V +5.0 V/-1.0 V
-
Power Consumption :
Approx. 27 Watt
-
Operating Temperature :
0 to 40 Degree C +32 to +104 Degree F
-
Storage Temperature :
-20 to +60 Degree C -4 to +140 Degree F
-
Humidity :
25 to 85 % Relative humidity
-
Maximum load protection :
7 lb 11 oz (Approx. 3.5 kg); 11 lb 10 oz (with VF, Mic, BCT-60MX, BP-L60A) (5.3 kg)
-
MSDW903
Picture Cache Board For MSW-900 series camcorder
-
MSDW904
Analog Composite Board For MSW-900 series camcorders
