The VEEMUX® Audio/Video Matrix Switch routes audio and video inputs from many video sources to multiple displays (projectors, monitors, etc.) and speakers via inexpensive CAT5/5e/6 cable. It is capable of connecting to as many as 32 video sources via transmitters and 64 video displays via receivers with a maximum extension of 1,000 feet between the transmitters and receivers. In addition to the remote inputs/outputs, the switch features one direct-connect VGA and stereo audio input/output for every 16 remote RJ45 connectors.
The audio/video signal from a single input can be routed to one or more destinations. Each image will be as crisp and clear as if directly connected to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.
Configure and control the switch through Ethernet, serial port, front panel buttons, or Infrared remote control.
Matrix Control Software with Graphical User Interface is included.
Supports resolutions up to 2048x1536 using NTI's 1,000' extenders and 1920x1440 using NTI's 600' extenders.
Inputs and outputs can be named.
Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.
Equipped with Liquid Crystal Display (LCD) for front panel operation.
A digital VU-meter shows the audio levels of the selected input.
Each output provides one video signal and one stereo audio signal.
Each input can be independently connected to any or all outputs with no image degradation.
No loss of audio or video quality between the transmitters and receivers.
VGA, S-Video and HDTV transmitters and receivers can be supported on the same VEEMUX unit.
VGA inputs only work with VGA outputs, S-Video inputs only work with S-Video outputs, and HDTV component video inputs only work with HDTV component video outputs.
The 1,000' transmitters will work with 600' receivers, and vice versa.
The maximum extension is 600 feet between the transmitter and receiver.
The VGA video from units with audio and/or RS232 can be routed to each other and to video-only units.
Direct-Connect Video Input/Output :
Female 15-pin HD connectors. 1920x1200 video resolution with no degradation. Impedance: 100 Ohms.
Direct-Connect Audio Input/Output :
3.5mm stereo audio jacks. Drives 8-Ohm speakers. Unbalanced gain: user defined. Frequency response: 20 Hz to 20 kHz, +/-0.5 dB. Total harmonic distortion + noise: 0.01% at 1kHz. 200 mW RMS of continuous power per output. When switching ports, audio mutes until video has been synchronized.
Remote Audio/Video Input/Output :
Female RJ45 input/output connectors for connecting transmitters and receivers.
110 or 220 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.)
Operating temperature: 32°F to 100°F (0°C to 38°C). Storage temperature: -20°F to 140°F (-30°C to 60°C). Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals :
VGA Extenders to 1,000 ft :
Supports resolutions up to 2048x1536. Available options: two-way audio (support for speakers and microphone), RS232, two-way audio + RS232. Compatible Transmitters and Receivers
VGA + Audio Extender to 600 ft :
Supports resolutions up to 1920x1440. Compatible Transmitters and Receivers
HDTV Component Video + Stereo Audio Extender to 600 ft :
Supports resolutions up to 1080p. Compatible Transmitters and Receivers
S-Video + Stereo Audio Extender to 600 ft :
Supports maximum 800x600 S-Video resolution. Compatible Transmitters and Receivers
You must be logged in to use the advanced filters. Register today and be entered to win an iPad® Now, when you register for My-iQ, you will automatically be entered for a
chance to win an iPad. AV-iQ will be giving away two iPads a month to new registrants from now until
InfoComm 2013 in June! register now