Watch how a new mom uses Lutron controls to create a soothing environment for her triplets, while adding convenience to her daily schedule--all while saving energy.
Works with GRX-4000 Control Units,
GRAFIK 5000 and 6000 Systems,
LP Dimming Panels,
XP Softswitch™ Panels, and
DMX512 dimming systems via the
2LINK™ option
Controls all popular load-types with a single dimmer - incandescent, electronic and magnetic low voltage, neon/cold cathode, fluorescent sources and switched loads
Pushbutton circuit selector inside panels simplifies system setup, field configuration and changes; assigns load types to dimmers, circuits (dimmer and breaker) to zones or GRAFIK Eye controls
Panels are prewired for 120, 220-240 or 277 volts and ready for installation; one input breaker per dimmer
Dimmer modules are plug-in design, 20A per circuit (16A continuous), 120-277 VAC, 50/60 Hz, and compensate for line voltage changes
Internal switch for normal or normal/emergency (non-essential or essential) power operation
Unique ribbed base conducts heat out of panel via convection cooling
Operates at a minimum of 20 degrees Celsius below the power conducting component temperature rating
Operating Temperature :
32 -104°F (0 - 40°C)
Input Power :
100-127V, 220-240V (non CE),
230V (CE), and 277V; all voltages 50/60Hz,
phase-to-neutral
Lighting Strike Protection :
Meets ANSI/IEEE
standard 62.41-1980, can withstand
voltage surges of up to 6000V and current
surges of up to 3000A
Power Failure Memory :
Automatically restores lighting to scene
selected prior to power interruption
Sources :
Operates these sources with a smooth
continuous Square Law dimming curve or
on a full conduction non-dim basis: Incandescent (Halogen)/Tungsten, Magnetic Low Voltage Transformer, Electronic Low Voltage Transformer, Lutron Electronic Fluorescent Dimming Ballasts, Magnetic Fluorescent Lamp Ballasts
System Communications :
Low-voltage
Class 2 (PELV) wiring connects Dimming
Panels to other components
Line (Mains) Voltage :
Feed, load, and
control circuit wiring only; no other
wiring or assembly required
You must be logged in to use the advanced filters. Register today and be entered to win an iPad® Now, when you register for My-iQ, you will automatically be entered for a
chance to win an iPad. AV-iQ will be giving away two iPads a month to new registrants from now until
InfoComm 2013 in June! register now