The LER-IAV is an E.I.A. compliant welded rack that includes a number of installed accessories that are commonly used in AV applications. The rack is 16-ga. steel (14-ga. steel bottom), reinforced at load-bearing junctures. Equipment mounts to adjustable rails that are recessed to provide 1.75" clearance to outside of rack. Top entry is via 10U opening and 6" deep rear conduit plane with 3 knockouts for (2"-1") conduit, 2 knockouts for (1.5"-1") conduit, plus room to use a Greenlee-style punch to make a 4" conduit opening. The top also has 6 (.5") knockouts for BNC style wireless antenna. The top can be closed using the two steel panels that are included as shipping stiffeners. The rack includes welded side panels and a locking rear door-all with vents at top and bottom. The open front also has top/bottom vents. Optional front door (LFD-series) can be ordered separately. Rack and accessories are made in the U.S.A. except where noted.

Installed Accessories: (see rack model no. for quantities)

* Adjustable Rails (RRD-series): the rack includes an extra pair of adjustable rails that can be repositioned anywhere along the side rail supports. (Height of rail varies with rack model.)
* Utility Shelf: rugged two-part, 16-ga. steel shelf features front and rear flange (.438") for added strength. Shelf is vented on bottom rear. Load rating: 50 lbs. Measures 2U x 15"D x 19"W (17.31" useable). Black semi-gloss powder
* Vari-depth Shelf (VDS-2-2032): 2U x 20-32" adj. D x 19"W, supports 250 lbs. Requires front and rear rail support.
* Vent Panel (SVP-2): 2U x 19"W, (.625") flange, 20-ga. steel with vents.
* Horizontal Cable Manager (CMBS-4): 4" offset stackable bar, 14-ga. steel, slotted.
* Vertical Cable Manager (CMV3-series): 3.25"W, 16-ga. steel, velcro post tie, square/round holes. (Height varies by rack model)
* 15A Power Strip: (varies by rack height)
- An 18U rack includes power strip model no. ACS-1506: 20"H x 1.625"W x 1.375"D, 6 single outlets, 6-ft. attached cord, transient voltage surge suppression, circuit breaker. UL Listed. Imported.
- A 21U or 35U rack includes power strip model no. ACS- 1512: 32"H x 1.625"W x 1.375"D, 12 single outlets, 12-ft. attached cord, transient voltage surge suppression, circuit breaker. UL Listed. Imported.
* Mobile Base (LMB-27F): mobile base with fine-floor casters that are made to protect floors like marble, wood and tile.