|
|
|
New
Fiberplex Technologies, LLC
The true “Swiss Army Knife” of fiber optic transport, the FOI-6010 in conjunction with any combination of a myriad of Fiberplex or third party SFP/SFP+ (Small Form-Factor Pluggable) optical & electrical modules, allows you to transport what you want....
Model: FOI-6010
Signal Processing Systems »
Converters
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
The ADP-2982 is wall mounted loudspeaker. An FOI-2982 fiber optic isolator is inserted in the port on the bottom of the unit.
Model: ADP-2982
Speakers »
Loudspeakers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
The FOI-2971 and FOI-4972 provide complete electrical isolation for 2-wire telephone communications.The FOI-4972 supports standard analog phones, STU-III (secure telephone unit) phones, STE (secure telephone equipment) phones, fax machines, and modems.
Model: FOI-4972
Fiber Optic Systems »
Fiber Optic Receivers & Transmitters
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
This fiber optic isolator\modem cards provides for full synchronous, asynchronous, or isochronous interfacing to serial data communications equipment.
Model: FOM-1090
Fiber Optic Systems »
Related Fiber Optic Products
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
The FOM-5400 is a 4 channel multiplexer that provides electrical-to-optical conversions for T/E carrier communications.The FOM-5400 offers much longer transmission distances than traditional Cat5 cabling.
Model: FOM-5400
Fiber Optic Systems »
Fiber Optic Switchers
|
|
|
|
|
|
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
The VIM-1808 is normally used as a "drive snake" for sending audio to amplifiers or powered speakers, or for distributed systems utilizing the fiber "pass thru" found on both the VIM-1808,0808.
Model: VIM-1808
Fiber Optic Systems »
Fiber Optic Distribution Amplifiers
|
|
|
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
The LightViper VIM-MY32 YGDAI cards are designed for use with Yamaha™ digital equipment containing YGDAI (Yamaha General Digital Audio Interface) card slots.
Model: VIM-MY32M Master Card
Fiber Optic Systems »
Related Fiber Optic Products
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
The VIM-1832 is normally used in connection with the VIS-1832 or VIS-4832 to achieve a 32?8 fiber-optic transport system.This system is normally the "tail" end for Stage to FOH or drive snake applications.
Model: VIS-1832
Fiber Optic Systems »
Fiber Optic Distribution Amplifiers
|
|
|
|
|
Featured
Fiberplex Technologies, LLC
The FiberPlex WDM16 is a 16 Channel Wavelength Division Multiplexer (CWDM). It can be used with FiberPlex FOM fiber modules, FiberPlex Shadow™ enabled devices or virtually any third party fiber optic equipment with data rates up to 3GB.
Model: WDM16
Fiber Optic Systems »
Fiber Optic Signal Processors
|
|
|
|
|
Fiberplex Technologies, LLC
The ADP-2981 is wall mounted loudspeaker. The FOI is provided power through this port. Signals received by the FOI-2982 will drive an internal 8 watt amplifier to deliver sound on the 8 inch loudspeaker.
Model: ADP-2981
Speakers »
Loudspeakers
|
|
|
|
|
Fiberplex Technologies, LLC
The VCB analog cables conform to the industry standard Tascam DA-88 analog pinout convention. They can be order with Male or Female XLR connectors or TRS balanced 1/4 inch plugs.
Model: Analog Breakout Cables
Cables & Connectors »
Audio Cables
|
|
|
|
|
|
|
|
Fiberplex Technologies, LLC
Power Cable, Lemo connector one end, bare leads on other, 6? long, for customer supplied power to FOI, ICM, and ASC modules.
Model: CBL-2401
Cables & Connectors »
Related Cable Products
|
|
|
|
|
