Dynacord

Total Products: 181

Model
Product Name
Description
12-inch Two-Way Full-Range Cabinet Speaker with EVS-12K 12-inch Woofer
12-inch two-way full-range cabinet speaker with DH-1K 1.5-inch titanium diaphragm compression driver and 15mm plywood enclosure.
Powered 12-inch Two-Way Full-Range Speaker with EVS-12K 12-inch Woofer
Powered 12-inch two-way full-range speaker with EVS-12K 12-inch woofer, DH-1K 1.5-inch titanium diaphragm compression driver, 500W class-D amplifier and integrated DSP with FIR filter.
15-inch Two-Way Full-Range Cabinet Speaker with EVS-15K 15-inch Woofer
15-inch Two-way full-range speaker with EVS-15K 15-inch woofer, DH-1K 1.5-inch titanium diaphragm compression driver and 15mm plywood enclosure.
Powered 15-inch Two-Way Full-Range Speaker with Class-D Amping
Powered 15-inch two-way full-range speaker with EVS-15K 15-inch woofer, DH-1K 1.5-inch titanium diaphragm compression driver, 500W class-D amplifier and integrated DSP with FIR filter.
18-inch Passive Subwoofer with EVS-18K 18-inch Woofer
18-inch Passive subwoofer with EVS-18K 18-inch woofer provides extended low-frequency output, 40 to 200Hz frequency range and 15mm plywood enclosure.
Powered 18-inch Subwoofer with EVS-18K 18-inch Woofer
Powered 18-inch subwoofer with EVS-18K 18-inch woofer, 400W Class-D amplifier and integrated DSP.
8-channel Analog Input Module for P 64 System
The AI-1 is an eight-channel analog input module for use in an Electro-voice NetMax or Dynacord P 64 system. Audio signals are connected via screw-lockable Euro block connectors.
Planar Waveguide Horn with Vented Subwoofer, 4 Ohms Nominal Impedance
The alpha B3 is concepted as a planar waveguide horn with a vented transducer cabinet. The recommended active x-over frequency is 100Hz with 18dB/oct. Butterworth.
3-Way Cabinet, Columnar Design, Powder Coated Steel Grill
The alpha X1 is concepted as a 3-way cabinet in columnar design and serves as mid/hi component in the large sound reinforcement system alpha. In conjunction with alpha B3 the recommended active x-over frequency is 100Hz.
3-Way Cabinet, Columnar Design, Powder Coated Steel Grill, 8-Pole Speakon Connectors
The alpha X1 is concepted as a 3-way cabinet in columnar design and serves as mid/hi component in the large sound reinforcement system alpha. In conjunction with alpha B3 the recommended active x-over frequency is 100Hz.
8-channel Analog Output Module for P 64 System
The AO-1 is an eight-channel analog output module for use in an Electro-voice NetMax or Dynacord P 64 system. The module offers eight high quality audio signals via screw-lockable Euro block connectors.
12-inch 2-Way Full range Cabinet, High Power Handling (500W Continuous / 2000W Peak)
The C 12.2 is a compact, trapezoidal 12-inch / two-way full-range cabinet offering very high power handling (500W continuous / 2000W peak) and sensitivity of 97dB 1W/1m.
15-inch 2-Way Full range Cabinet, Power Handling (500W Continuous / 2000W Peak)
In the C 15.2, DYNACORD is offering an extremely compact, trapezoidal 15-inch / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100dB 1W / 1m for applications requiring an extended low end.
2x 15-inch 2-Way Full range Cabinet, High Power Handling (1000W Continuous / 4000W Peak)
If very high sound pressure levels are required from a compact format, the trapezoidal C 25.2 double 15-inch / two-way full-range cabinet is the ideal choice, with its very high power handling (1000W continuous / 4000W peak).
Digital Audio Network Interface Module
The CM-1 is a compact interface module to connect simultaneously 32 digital audio input and 32 digital output signals to a CobrNet network. CobraNet is a network technology for multi-channel transmission of digital audio data.
10-channel Compact Mixing System, 6 Mic/Line + 4 Mic/Stereo-Line
The new Compact Mixing Systems CMS 1000 and CMS 1600 are high performance, high quality mixers with integrated digital FX processors and Dual Graphic-EQ’s.
16-channel Compact Mixing System, 12 Mic/Line + 4 Mic/Stereo-Line
The new Compact Mixing Systems CMS 1600 are high performance, high quality mixers with integrated digital FX processors and Dual Graphic-EQ’s.
22-channel Compact Mixing System, 18 Mic/Line + 4 Mic/Stereo-Line
22-Channel compact mixing system with 18 mic/line + 4 mic/stereo-line inputs
Compact Mixing System, All-in-One Solution for Basically Any Application
Compact mixing system DYNACORD CMS 600-3 is a professional mixer offering an optimized all-in-one solution for basically any application.
Cobra-2 Compact Line-array Loudspeaker System
The COBRA-2 SYSTEM is designed to provide high-quality sound reinforcement for events in small to medium-sized marquees or halls covering distances up to 40 metres and areas in the region of 1,000 square metres.
4-way COBRA-4 Loudspeaker System
The active 4-way COBRA-4 system is designed to project over distances of up to 80 metres in medium-sized marquees, halls and open-air venues and produces SPLs at the FOH position.
Active 3-Way Speaker Cabinet, 3-Driver HF Slot Waveguide
Active 3-Way cabinet for use as a farfield cabinet in compact line arrays and other demanding applications, where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.
Active 3-Way Speaker Cabinet, 4-Driver Mid-Range Line Array
DYNACORD's COBRA-4-TOP is an active 3-Way cabinet for use as a nearfield cabinet in compact line arrays and other demanding applications.
Planar Waveguide Basshorn, 600W EVX 180B Transducer
DYNACORD's COBRA-PWH is a Planar Waveguide Basshorn, equipped with the high-power Electro-Voice EVX 180B 18-inch transducer.
Vented Direct Radiating Sub-Woofer, High-Power Electro-Voice EVX 180B 18-inch Transducer
DYNACORD's COBRA-SUB is a vented direct radiating cabinet, equipped with the high-power Electro-Voice EVX 180B 18-inch transducer.
3-Way Line Array Cabinet, 4-Driver Mid-Range Line Array
DYNACORD's COBRA-TOP is a 3-Way cabinet for use in compact line arrays and other demanding applications where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory.
Folded Sectoral / Wide-Angle Horn with 1-3/8in Threaded Connector
The Cobreflex III is a folded sectoral, wide-angle horn for premium speech reproduction.
Complete System Monitoring and Supervision
Critical to be able to monitor the status, health and components of a system. Whether the system is mobile or permanently installed, the ability to spot and diagnose any potential problems quickly and efficiently
All-In-One Electro Acoustics Central Control System, Includes a Mixing and an Amplifier Sections
The CPA 2000 combines several functions in a compact-sized desktop enclosure of only 3 height units. This includes a mixing section with 6 inputs and an amplifier section.
Editor Software, Capable of Computing and Displaying the Actual Sonic Frequency
CROSSMAX is the world's only editor software that is capable of computing and displaying the actual sonic frequency and phase responses of a sound reinforcement installation in relation to the data of the included speaker systems.
Custom Interface, Programmers Can Create Clusters of Controls
One of the most important aspects of how a system is operated is the interface for the user. IRIS-Net allows fully customizable Graphic User Interfaces for any application and any kind of user.
Professional Floor Monitor, Coaxial Monitor 15- / 1.4-inch 2-Way
The CXM 15 is a extremely light-weight, coaxially designed 15- / 1.4-inch 2-way wedge for professional applications.
Active 2-Way 12-inch Loudspeaker, Powered Full-Range Cabinet
The D 11A is a conveniently equipped active 12 / 1-inch full range box offering integrated Class-D amplifiers, an electronic crossover and loudspeaker equalization.
12-inch 300W 2-Way Loudspeaker, High-Power Lightweight Fullrange Cabinet
Newly designed D12 fulfills a longtime customer demand for a lightweight , extremely robust high performance professional 12-inch 2-way plastic cabinet.
12-inch 3-Way Loudspeaker, 90 x 50° Constant-Q HF Horn
Newly designed D12-3 fulfills a longtime customer demand for a lightweight, extremely robust high-performance Plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
Active 3-Way Speaker Cabinet, 90 x 50° Constant-Q HF Horn
The DYNACORD D 12-3A is a powered, biamped, light-weight and extremely robust high-performance professional 12-inch 3-way plastic cabinet for use in professional portable sound reinforcement applications.
Powered 2-Way Loudspeaker, High-Performance Professional 12-inch 2-Way Plastic Cabinet
The DYNACORD D12A is a powered, biamped, lightweight and extremely robust high-performance professional 12-inch 2-way plastic cabinet for use in professional portable sound reinforcement applications.
12-inch 300W Compact Speaker System, High Performance Professional Plastic Cabinet
Newly designed D12W fulfills a longtime customer demand for a lightweight, extremely robust high performance professional 12-inch 2-way plastic cabinet for use in professional, portable/fixed install sound reinforcement applications.
15-inch 500W 3-Way Compact Speaker System, Plastic Cabinet
D15-3 Compact speaker system fulfills a demand for a 15-inch 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
Black 8- / 1-inch 2-Way Compact Speaker System, Robust Plastic Cabinet
The D 8 Compact speaker system is a lightweight, robust 8- / 1-inch 2-way plastic cabinet for professional sound reinforcement applications.
Active 2-Way 8- / 1-inch Full-Range Cabinet Speaker
The D 8A is the active version of the D 8 offering integrated Class-D power amplifiers, an electronic crossover and loudspeaker equalization. Active 2-way 8- / 1-inch Full-range cabinet with Class-D amping.
White 8- / 1-inch 250W 2-Way Compact Speaker System
The D 8 is a lightweight, robust 8- / 1-inch 2-way plastic cabinet speaker for professional sound reinforcement applications.
3-way Active Loudspeaker System with 2 x D 11A and 1 x PowerSub 212
The D-LITE activefour is a 3-way active system. It consists of 2x D 11A and 2x double 12-inch subwoofers for bigger venues. The integrated Class-D Power amplifiers can produce up to 3200W complete system-power.
3-way Active Loudspeaker System with 2 x D 8A and 1 x PowerSub 212
The D-LITE activeone 3-way active loudspeaker system. It consists of 2x D 8A and 1x PowerSub 212 for smaller applications. It features one mono double 12-inch subwoofer.
3-way Active Loudspeaker System with 2 x D 8A and 2 x PowerSub 212
The D-LITE activetwo is a 3-way active system. It consists of 2x D 8A and 2x PowerSub 112 for small to medium-sized venues. It features two single 12-inch subwoofers.The integrated Class-D power amplifiers can produce up to 2400W complete system power.
19-inch Base Unit with Height of 2 RU
The DCS 400 module series increase the PROMATRIX system’s control capabilities in many ways. The DCS system can be expanded at any time after installation for increased functionality.
Shielding Module for Insertion on the Rear of the DCS 400 Rack Frame
The module is meant for insertion on the rear of the DCS 400 rack frame providing shielding between DCS 408R and DCS 409R modules
AF Relay Module for Audio Signals (Line Level) or Control Outputs
The module provides switching for audio signals (line level) or control outputs independent from the DCS 400 system
DCS 400 Series Line Relay Board for Switching Audio or Other Control Functions
These modules provide relay contact closures for use in switching audio or other control functions. The DCS 408/408R module is capable of switching of 70 or 100V speaker lines.
DCS 400 Series Line Relay Module, Capable of Switching of 70 or 100V Speaker Lines
These modules provide relay contact closures for use in switching audio or other control functions. The DCS 408/408R module is capable of switching of 70 or 100V speaker lines.
DCS 400 Series AF Relay Board for Use in Switching Audio or Other Control Functions
These modules provide relay contact closures for use in switching audio or other control functions. The DCS 409/409R is capable of switching line level audio signals or control outputs.
DCS 400 Series AF Relay Board, CE marking and UL and CSA Recognized
These modules provide relay contact closures for use in switching audio or other control functions. The DCS 409/409R is capable of switching line level audio signals or control outputs.
DCS 400 Series Logic Input Board for Control Lines, Pushbuttons, Switches and Sensors
The module provides inputs for control lines, pushbuttons, switches and sensors allowing the evaluation of their individual status (on/off) in the DPM 4000 system. The modules have CE marking as well as UL and CSA recognition for DCS 412.
DCS 400 Series Logic Input Module, CE Marking and UL and CSA Recognition
The module provides inputs for control lines, pushbuttons, switches and sensors allowing the evaluation of their individual status (on/off) in the DPM 4000 system. The modules have CE marking as well as UL and CSA recognition for DCS 412.
DCS 400 Series Analogue Input / Output Module for Use in Monitoring and Control Functions
The module provides analogue input and output interfacing capabilities for use in monitoring and control functions. Both inputs and outputs are capable of handling 0 to 10V DC with 256 distinct levels.
DCS 400 Series Analogue Input / Output Module for Monitoring and Control Functions
The module provides analogue input and output interfacing capabilities for use in monitoring and control functions. Both inputs and outputs are capable of handling 0 to 10V DC with 256 distinct levels.
Control Module for Spare Amplifier Switching, CE Marking
The DCS 421R is a control module for permanent monitoring in combination with DCS 422R and DCS 423R modules.
AF Input Switching with Pilot Tone Generation and Summation
The DCS 422R is a NF input switching with pilot tone generation and summation.
100V Relay Switching and Permanent Line Monitoring
The DCS 423R is a slide-in module with 4 relays for 100V switching of the power amplifier outputs with pilot tone evaluation
Battery Charging Unit with 24V/4A Capacity
Battery charging unit is fully automatic charging unit 24V/4A for constant I/U battery charging in continuous battery power supply mode.
Emergency Power Supply with Integrated Charging Unit
The DEM 314 is an emergency power supply with integrated charging unit. It contains a fixed electrolyte maintenance-free battery with, universal location lead accumulators.
Battery Slide-In Unit with 38Ah Capacity
The DEM 316 slide-in unit contain a fixed electrolyte maintenance-free battery with universal location lead accumulators. They have a capacity of 38Ah.
Battery Slide-In Unit with 65Ah Capacity
The DEM 317 slide-in unit contain a fixed electrolyte maintenance-free battery with universal location lead accumulators. They have a capacity of 65Ah.
8-channel Digital Input Module for P 64 System
The DI-1 is an eight-channel digital input module for use in an Electro-voice NetMax or Dynacord P 64 system. Digital audio signals in AES/EBU or S/PDIF format are connected via screw-lockable Euro block connectors.
Ceiling Speaker with Outer Plastic Ring, 90dB Sensitivity
The ceiling speaker DL 72 W is equipped with a high-performance full range chassis with dust cover as well as a 100 V transformer.
Ceiling Speaker with Outer Plastic Ring, 6W Power Handling
The ceiling speaker DL 72 is equipped with a high-performance full range chassis with dust cover as well as a 100 V transformer.
2-way Ceiling Speaker with Outer Metal Ring, 30W Power Handling
The DL 72/32 A is a premium 2-way ceiling speaker with integrated crossover and 100V transformer.
Weatherproof Loudspeaker with 10 / 5 / 3 / 1W Power Tapping
DL 800/10T is weatherproof loudspeaker with compression drivers and integrated 100V transformers that are particularly suitable for use in harsh and noisy environments.
Weatherproof Loudspeaker with 15 / 10 / 5 / 3 / 1W Power Tapping
DL 800/15T is weatherproof loudspeaker with compression drivers and integrated 100V transformers that are particularly suitable for use in harsh and noisy environments.
Weatherproof Loudspeaker with 25 / 20 / 15 / 10W Power Tapping
DL 800/25T is weatherproof loudspeaker with compression drivers and integrated 100V transformers that are particularly suitable for use in harsh and noisy environments.
Weatherproof Loudspeaker with 30 / 15 / 10 / 5 / 3 / 1W Power Tapping
DL 800/30T is weatherproof loudspeaker with compression drivers and integrated 100V transformers that are particularly suitable for use in harsh and noisy environments.
4-Inch Full Range Ceiling Speaker, Metal Front Grille
The ceiling speaker DL 84 is equipped with a 4-inch full range chassis as well as a 100V transformer. The metal front grille is tightly connected to the outer metal ring. Using fast spring clamps the speaker can be installed in a ceiling.
5" Full-range Ceiling Speaker with Outer Metal Ring
The ceiling speaker DL 94 A is equipped with a 5-inch full range chassis as well as a 100V transformer.
5" Full-range Ceiling Speaker with Outer Metal Ring, 89dB Sensitivity
The ceiling speaker DL 94 B is equipped with a 5" full range chassis as well as with a 100V transformer.
Ceiling Speaker with Outer Metal Ring, 100dB Maximum SPL
The ceiling speaker DL 96 A is designed as a two-piece system with outer and inner ring. Ring and front grille are completely manufactured from metal and come with a quick mount system with metal tightening springs for long-lasting stability.
Ceiling Speaker with Outer Metal Ring, 92dB Sensitivity
The ceiling speaker DL 96 B is equipped with a 6.5-inch full range chassis as well as with a 100V transformer.
DMM Message Manager with Password Protection
The DMM 4650 is a signal processor, capable of audio recording and playback, as well as, audio signal generation such as alarms.
8-channel Digital Output Module for P 64 System
The DO-1 is an eight-channel digital output module for use in an Electro-voice NetMax or Dynacord P 64 system. Digital audio signals in AES/EBU format are connected via screw-lockable Euro block connectors.
Paging and Pre-Recorded Message Power Amplifier, CE Marking
The power amplifier DPA 4120/40 have been specially designed to ensure durable performance and reliable operation of sound reinforcement systems with several independent loudspeaker lines.
Paging and Pre-Recorded Message Power Amplifier, Durable Performance and Reliable Operation
The power amplifier DPA 4245/60 have been specially designed to ensure durable performance and reliable operation of sound reinforcement systems with several independent loudspeaker lines.
Paging and Pre-Recorded Message Power Amplifier, Can be Configured in a Different Ways
The power amplifiers DPA 4120/40 have been specially designed to ensure durable performance and reliable operation of sound reinforcement systems with several independent loudspeaker lines.
Class D Amplifier, High Efficiency and 24V DC Emergency Power Supply
The three Class D amplifier for PROMATRIX 8000 systems with high efficiency and 24V DC emergency power supply capability.
Paging Console, LC-Display, 6 Function Keys
This paging station employs gooseneck microphone and 6 function keys as well as a covered alarm key.
Paging Console for PROMATRIX 8000 System
The DPC 8015 is a paging console for the PROMATRIX 8000 system. The paging console employs a permanently supervised gooseneck microphone with windscreen, a total of 20 buttons, a lighted LC-display and a integrated loudspeaker.
Redundant Paging Station, 2-in-1 Microphone Terminals for the PROMATRIX System in a 19-inch Enclosure
The DPC 4010/10R and the DPC 4020/20R paging stations are "two in one" microphone terminals for the PROMATRIX system in a 19-inch enclosure.
Paging Station is a Redundant Console with 2 LCDs and 10 Selection Keys
The DPC 4010/10R paging station is "two in one" microphone terminals for the PROMATRIX system in a 19-inch enclosure, which allow to control redundant parts of the installation in A/B wiring.
Paging Station is a Redundant Console with 2 LCDs and 20 Selection Keys
The DPC 4020/20R paging station is "two in one" microphone terminals for the PROMATRIX system in a 19-inch enclosure, which allow to control redundant parts of the installation in A/B wiring.
Digital Matrix Manager for Promatrix 8000 System
DPM 8016 - Digital Matrix Manager for PROMATRIX 8000 Systems, with integrated controller and flexible matrix, can have up to 16 audio inputs and 16 audio outputs.
DPP Series PROMATRIX Power Supply, Can be Used as a Single Device and in Combination
The mains power supply slide-in units DPP 4004/4012 can be used as a single device and in combination with the Dynacord PROMATRIX system.
DPP Series PROMATRIX Power Supply, CE Approved and UL / CSA recognized
The mains power supply slide-in units DPP 4004/4012 can be used as a single device and in combination with the Dynacord PROMATRIX system.
Rack Mixer And/Or Audio Signal Router, 8 Audio Inputs and 2 Audio Outputs
The DRM 4000 is a rack mixer and/or audio signal router offering 8 audio inputs and 2 audio outputs. The inputs are divided into 4 MIC/Line and 4 AUX channels.
2 x 450W Power Amplifier, Very High and Stable Output
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications.
2 x 600W Power Amplifier, Class AB Topology, 2 HU, Optional Remote Control Module (RCM 810)
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications.
2 x 900W Power Amplifier, Class H Topology, 2 HU, Optional Remote Control Module (RCM 810)
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications.
2 x 1200W Power Amplifier, Class H Topology, 2 HU, Optional Remote Control Module (RCM 810)
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications.
4 x 500W Multi-channel Power Amplifier, Class D Topology, 2 HU, Optional Remote Control Module (RCM-810)
Innovative DYNACORD technology, exemplary flexibility, very high output with an extremely good efficiency and integration into IRIS-Net networks The multi-channel DSA 8405 / 8410 / 8805 power amplifiers are a milestone in the design.
4 x 1000W Multi-channel Power Amplifier, Class D Topology, 2 HU, Optional Remote Control Module (RCM-810)
The multi-channel DSA 8410 power amplifier is a milestone in the design and production of high-powered installation power amplifier.
8 x 500W Multi-channel Power Amplifier, Class D Topology, 2 HU, Optional Remote Control Module (RCM-810)
The multi-channel DSA 8805 power amplifier is a milestone in the design and production of high-powered installation power amplifier.
Digital 2-in-6 Sound System Manager, 2 Inputs and 6 Outputs
With the DSP 260 digital 2-in-6 sound system manager, DYNACORD is continuing its proud tradition in the field of innovative digital signal processors.
Digital Networkable 2-in-6 Sound System Processor, 2 Analogue, 2 Digital AES/EBU Inputs and 6 Analogue Outputs
The DSP 600 is a networkable digital sound system processor with 2 analogue, 2 digital AES/EBU inputs and 6 analogue outputs.
EASE Focus Aiming Software, Allows the Modelling of Acoustic Sources
EASE Focus is a software that allows the modelling of acoustic sources, in particular line arrays, in two dimensions.
Audio System, Better Performance, Easier Operation and Greater Reliability
Audio systems are made up of many different kind of components, including loudspeakers, amplifiers, signal processors and control devices.
Medium Long Throw Mid/High- Frequency Cabinet, Coaxial Design
The DYNACORD FX 12 is concepted as a medium longthrow mid/high- frequency cabinet in coaxial design. It can be used also without subwoofer cabinets in high-quality sound reinforcement system for speech for medium-throw distances.
Planar Waveguide Basshorn, High-Power Electro-Voice
Planar Waveguide Basshorn, equipped with the high-power electro-voice EVX 180B 18-inch transducer.
12-inch High-Power Ceiling Loudspeaker System, 30W Continuous Power Handling
The ceiling speaker HCS 12 consists of a coaxial 2-way system with integrated crossover featuring excellent acoustic characteristics.
12-inch High-Power Ceiling Loudspeaker System, 30W Continuous Power Handling, Weather Resistant
The ceiling speaker HCS 12R consists of a coaxial 2-way system with integrated crossover featuring excellent acoustic characteristics.
8-inch High-Power Ceiling Loudspeaker System, 30W Continuous Power Handling
The ceiling speaker HCS 8 consists of a coaxial 2-way system with integrated crossover featuring excellent acoustic characteristics.
8-inch High-Power Ceiling Loudspeaker System, 30W Continuous Power Handling, Weather Resistant
The ceiling speaker HCS 8R consists of a coaxial 2-way system with integrated crossover featuring excellent acoustic characteristics.
Intelligent Remote & Integrated Supervision for All Remote-Controllable Devices and Systems
RIS-Net (Intelligent Remote & Integrated Supervision) is the integrated software platform for all remote-controllable devices and systems.
IRIS-Net Project Generator for Amplifiers
IRIS-Net comes complete with an easy to use but extremely powerful application for creating project files for amplifiers that can automate device naming, grouping DSP settings and user interface creation.
Spherical Speaker, equipped with a Full-Range Chassis and a 100V Transformer
The spherical speaker KL 72+ is equipped with a full range chassis and a 100V transformer. The enclosure consists of white plastic with a white coated perforated plate coverage.
Loudspeaker Line Measuring Load with Electro-Voice CPS Series or DYNACORD DSA Series Multi Channel Amplifiers
The LML-1 can be used with all Electro-Voice CPS Series or DYNACORD DSA Series multi channel amplifiers in 100V line mode for loudspeaker line supervision.
1300W Power Amplifier for Small to Medium-Sized Full-Range Cabinets and MF/HF Components
Power amplifier with an output rated at 2 x 1300W into 2 ohms and 2 x 800W into 4 ohms, this is the ideal power amplifier for small to medium-sized full-range cabinets and MF/HF components in active multiway systems.
2 x 1600W Power Amplifier for Professional Multi-Way Components as Well as Medium Sized Subwoofers
Power amplifier with a stable output of 2 x 1600W into 2 ohms and 2 x 1100W into 4 ohms, this is the ideal amplifier for professional multi-way components as well as medium sized subwoofers in concert sound systems.
2 x 2100W Power Amplifier with Plenty of Headroom for Large Subwoofer Arrays
The new flagship of the LX series delivers a mighty 2 x 2100W into 2 ohms and 2 x 1500W into 4 ohms and therefore has plenty of headroom for large subwoofer arrays.
8-channel Microphone Input Module for P 64 System
The MI-1 is an eight-channel microphone input module for use in an Electro-voice NetMax or Dynacord P 64 system. Microphone signals are connected via screw-lockable Euro block connectors.
Modular, Network Compatible Audio Matrix, 8 Channel Audio-Input or Output
The P 64 is a modular, network compatible audio matrix including signal processing, system monitoring and remote operability.
2RU Power Amplifier, Outstanding Audio Performance and Exceptional Reliability
The DYNACORD PCL-Series power amplifier line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design.
2RU Power Amplifier, 330W Power Consumption
The DYNACORD PCL-Series power amplifier line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design.
2RU Power Amplifier, 545W Power Consumption
The DYNACORD PCL-Series power amplifier line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design.
2RU Power Amplifier, 385W Power Consumption
The DYNACORD PCL-Series power amplifier line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design.
2RU Power Amplifier, 530W Power Consumption
The DYNACORD PCL-Series power amplifier line combines outstanding audio performance, exceptional reliability and secure operational safety in a compact 2RU chassis design.
Ceiling Speaker with Outer Plastic Ring, 98dB Maximum SPL
The ceiling speaker PL 70 W is equipped with a high-performance full range chassis with dust cover as well as a 100V transformer. The metal front grille is tightly connected to the outer plastic ring.
4-channel Controlled Power Amplifier, Output Power Capacity of 2600W into 4 Ohms
The PM2600 4-channel controlled power amplifier provides an overall output power capacity of 2600W into 4 ohms. Although being suitable for universal use, the amplifier has been mainly designed to easily accomplish professional active 2-way sound rei
2 x 2.500W 3-Stage Grounded Bridge Power Amplifier, Stable and Very High Power Output
The power amplifier H2500 is part of Dynacord's new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers.
2 x 1.450W 3-Stage Grounded Bridge Power Amplifier, Stable and Very High Power Output
Innovative 3-stage Grounded Bridge Class H Topology power amp with "floating" switching power supply unit.
Power-Mixer 3.Generation with 6+4 Inputs, 4-channel USB Audio Interface
Power-Mixer 3.generation with 6+4 Inputs, 6x AUX, 2 digital Effect-channels, 4-channel USB Audio Interface, 11-Band Stereo-EQ and 2x 1000W Class-D amp.
Power-Mixer 3.Generation with 12+4 Inputs and 4-channel USB Audio Interface
Power-mixer 3.generation with 12+4 inputs, 6x AUX, 2 digital effect-channels, 4-channel USB audio interface, 11-band stereo-EQ and 2x 1000W Class-D amp.
Power-Mixer 3.Generation with 18+4 Inputs and 4-channel USB Audio Interface
Power-mixer 3.generation with 18+4 inputs, 6x AUX, 2 digital effect-channels and 4-channel USB audio interface.
Power-Mixer 3.Generation with 4+4 Inputs and 4-channel USB Audio Interface
Power-Mixer 3.generation with 4+4 inputs, 3x AUX, 2 digital Effect-channels, 4-channel USB audio interface, 9-band stereo-EQ and 2x 1000W Class-D amp.
Compact Active 12-inch Subwoofer with Class-D Amplifier
Extremely compact active 12-inch subwoofer with Class-D amplifier.
Compact Active Double 12-inch Subwoofer with 2 x 200W RMS / 2 x 400W Maximum Output Power Amplifiers
The PowerSub 212 is an extremely compact, high powered subwoofer with 2x 12-inch woofers and 2 x 200W RMS / 2 x 400W maximum output power amplifiers.
Active 12-inch Subwoofer with 800W + 2 x 250W Digital Power Amplifier
The PowerSub 312 active 12-inch subwoofer was specially conceived to permit the swift and simple creation of a subwoofer satellite system.
Active 15-inch Subwoofer with Four Integrated Digital Power Amplifiers
Active 15-inch subwoofer with four integrated digital power amplifiers provides total output power of 2000W and has been designed for the quick and easy set-up of subwoofer satellite systems.
High-Performance Powered Subwoofer with Internal 24-bit 1-in-3 DSP Controller
The PSD 215 (1 x 15-inch) is high-performance powered subwoofers designed to simplify creating active 2-way systems.
High-Performance Powered Subwoofer with 2 x 1000W RMS Class-D Amplifier
The PSD 218 (1 x 18-inch) are high-performance powered subwoofers designed to simplify creating active 2-way systems.
High-Performance Non-Powered Subwoofer for Active Loudspeaker Systems
The PSE 215 is non-powered versions of the PSD subwoofer, share the same dimensions, transducer configurations, and the acoustic characteristics.
High-Performance Non-Powered Subwoofer for Active Loudspeaker Systems
The PSE 218 is non-powered versions of the PSD subs, share the same dimensions, transducer configurations, and the acoustic characteristics.
High-Power Double 18-inch Subwoofer, Voice Coil Tracking Protection
High-power double 18-inch subwoofer in planar waveguide basshorn-design. The PWH 28 can be integrated without any problems in Cobra-Systems for setups in medium- to big Bass-Arrays or alternative to Single 18-inch Cobra PWH cabinets.
Dual-channel Digital Controller Module for Live Sound, PA and Fixed Installation
The RCM-26 is a dual-channel digital controller module for live sound, PA and fixed installation. It offers all conventional signal-processing functions such as parametric equalizers, crossovers, delays, compressors and limiters.
Remote Control Module for Live Sound Reinforcement, PA and Fixed Installation Applications
The RCM-28 Remote control module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications.
Iris-Net Module for DSA Series Power Amplifiers
IRIS-Net module for remote control and supervision of DSA Series power amplifiers.
Stable 2 x 600W Power Amplifier, Class AB Topology
2 HU Power amplifier with stable 2 x 600W output power and class AB topology.
Stable 2 x 900W Power Amplifier, Class H Topology
2 HU Power amplifier with stable 2 x 900W output power, class H topology.
Stable 2 x 1200W Power Amplifier, Class H Topology
2 HU Power amplifier stable 2 x 1200W output power, class H topology.
Acoustic Wall Speaker with Full-Range Chassis and 100V Transformer
SL 70 is an acoustic wall speaker meant to be placed on top of a lowered ceiling, consisting of a black wooden mounting wall with full range chassis and a 100V transformer.
Stable 2 x 450W Power Amplifier, Class AB Topology
2 HU Power amplifier with stable 2 x 450W output power and class AB topology.
Weatherproof Sound Projector with One Broadband Chassis and 100V Transformers
The SP 20 is weatherproof sound projector in plastic housings with a mounting bracket that makes horizontal rotation possible.
Weatherproof Sound Projector, Equipped with Two Broadband Chassis and 100V Transformers
The SP 20 D is weatherproof sound projectors in plastic housings with a mounting bracket that makes horizontal rotation possible.
Direct Radiator Subwoofer with 1 x 15-inch Woofer
The Sub 1.15 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.
Direct Radiator Subwoofer with 1 x 18-inch Woofer
The Sub 1.18 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.
Passive Subwoofer with High-Power DYNACORD DND12S400 Neodymium Transducer
DYNACORD's SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer.
Passive Subwoofer with High-Power Electro-Voice EVS15S Transducer
DYNACORD's SUB 115 is a vented direct radiating cabinet, equipped with the high-power Electro-Voice EVS15S transducer.
Passive Subwoofer with High-Power DYNACORD LFS 18700 Transducer
DYNACORD's SUB 118 is a vented direct radiating cabinet, equipped with the high-power DYNACORD LFS 18700 transducer.
Subwoofer, Designed for Use In Active Multiway Systems, Suited for Medium to Large Bass Arrays
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems.
Direct Radiator Subwoofer with 2 x 18-inch Woofers
The Sub 2.18 is a double 18-inch, high-power subwoofer for very high sound pressure levels: sensitivity 102dB 1W / 1m, maximum SPL 138dB.
700W RMS Subwoofer, Designed for Use In Active Multiway Systems
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays.
Pre-Wired 12U Racks for Cobra-2 and Cobra-4 Systems
The pre-wired 12U racks for Cobra-2 and Cobra-4 systems integrate DSP controller, amplifiers, NF panel and a 32A mains connector on the rear AC panel.
2-way Passive Full-range Vertical Array Loudspeaker
TS 100 is a 2-way full-range vertical array cabinet speaker. Both the acoustic and mechanical design of TS 100 two-way full range cabinet, with its power handling of 150 W RMS, are optimized for multifunctional applications.
2-way Passive Full-range Vertical Array Loudspeaker, White
TS 100W is a 2-way full-range vertical array cabinet speaker. Both the acoustic and mechanical design of TS 100 two-way full range cabinet, with its power handling of 150 W RMS, are optimized for multifunctional applications.
2-way Passive Full-range Vertical Array Loudspeaker
TS 200 is an extremely compact, two-way high-performance loudspeaker, with a nominal power handling capacity of 300W / RMS, suitable for a multitude of highly demanding tasks.
2-way Passive Full-range Vertical Array Loudspeaker, White
TS 200W is an extremely compact, two-way high-performance loudspeaker, with a nominal power handling capacity of 300W/RMS, suitable for a multitude of highly demanding tasks.
2.5-way Passive Full-range Vertical Array Loudspeaker, White
The TS 400W was designed to provide a very even and smooth coverage over a very wide bandwidth by using spaced and filtered woofers as array elements.
Vertical Array Systems for Mobile and Installation Applications
The TS 400 is a compact, powerful and versatile loudspeaker system for mobile and installation applications.
Vertical Array Loudspeaker System with 2 x TS 400 and 2 x PSD 215
The VA 215 is the most compact configuration of vertical array system. Very simple to transport and set up, yet with enough power for audiences of up to 500, ideal for speech-based or medium-sized musical events.
Vertical Array Loudspeaker System, 35Hz to 20kHz Frequency Response
The VA215-200 is even smaller and suitable for events where listeners are mainly in close proximity (e.g. the dance floor).
Vertical Array Loudspeaker System with 2 x TS 400 and 2 x PSD 218
The VA 218 system offers deep bass reproduction of an 18-inch woofer but saves on weight and volume, so that for smaller audiences or venues very good results can be achieved even with a system of modest dimensions.
Vertical Array Loudspeaker System, 44Hz to 20kHz Frequency Response
The VA 312-100 is a vertical array loudspeaker systems with 44Hz to 20kHz frequency response. The smallest and most efficient system for cabaret acts, folk groups or events aspiring to an intimate, club atmosphere.
Small Mobile Vertical Array Loudspeaker System, 44Hz to 20kHz Frequency Response
The VA312-200 is a small mobile system offering superlative performance. For solo entertainers, duos, small bands and even DJs, this is the ideal system.
Vertical Array Loudspeaker System with 2 x TS 400, 2 x PSD 215 and 2 x PSE 215
The VA 415 system offers maximum output combined with optimum volume and weight. Optimal coverage can be provided to audiences of up to 800 people.
Vertical Array Loudspeaker System with 2 x TS 400 2 x PSD 218 and 2 x PSE 218
The VA 418 system represents the most extensive configuration of the Vertical Array system, for events with audiences up to 1,000 strong.
2-Way Fullrange Cabinet Speaker, Optimized Acoustically and Mechanically for Multi-functional Applications
The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding application
2-Way Fullrange Cabinet, Rotatable CAD-optimized 90 x 45° Constant Directivity Horn
The DYNACORD VL152 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications
2-Way Fullrange Cabinet Speaker with 2 x DND 12350 Neodymium Woofers
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications.
2-Way Fullrange Cabinet Speaker with 2 x Neodymium DND 6130-16 Woofers
The DYNACORD VL262 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications.
2-Way Fullrange Cabinet Speaker with Neodymium DND 6130-16 Woofer
The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications.
Wall-Mounted Speaker, 100V Transformer Can be Adjusted to Full, Half and Quarter Power
The WL 90 wall-mounted speaker is equipped with a premium full range chassis and especially suitable for music and speech reproduction in 100V sound reinforcement systems.
Wall-Mounted Speaker, Low Impedance Volume Control
Due to the integrated 100V transformers, the WL 90 series can be used at full, half or quarter output power. The mounting is carried out through two screws.
Wall-Mounted Speaker, Low Impedance Volume Control is Bridged when Used with a Priority Relay
Due to the integrated 100V transformers, the WL 90 series can be used at full, half or quarter output power. The mounting is carried out through two screws.
High Power Xa Loudspeaker System
Xa-2 systems is setting highest standards in audio performance, reliability and price.
Active 2-Way Power Amplifier with Class H Technology and Switching Power Supply
Universally usable Xa 4000 active 2-way power amplifier provides Class H technology and a switching power supply.