| Model |
Product Name |
Description |
|
5.1PA |
Precision Level Control |
The 5.1 System was custom made for post production suites.
|
|
7705-1 |
King’s Tri-Loc® Camera Plug |
King's Tri-Loc Series of triaxial camera connectors was developed to solve video interconnect challenges faced by major networks.
|
|
AB-8 |
8-Channel Mic/Line Switcher |
The AB-8 is an 8-channel, balanced, bi-directional signal switcher, 1 in - 2 out or 2 in - 1 out per channel.
|
|
AC6RSP |
Single-space 19-inch Rack-mount AC Power Panel |
6 outlets on rear with surge protection.
|
|
AC8R2F |
Single-space 19-inch Rack-mount AC Power Panel |
8 outlets on rear, 2 outlets on front
|
|
AD1 |
6ft Adapter Cable |
6ft 16GA MDP dual banana plug to 1/4-inch jack.
|
|
AD3 |
10ft Adapter Cable |
10ft 1/4-inch TS phone plug to 1/4-inch TS jack, Whirlwind Accusonic+1.
|
|
AESAD |
Portable AES Analog To Digital Converter |
The AESAD is a portable battery powered device for converting mic or line level analog audio into an AES/EBU digital audio stream.
|
|
AESDA |
Portable AES Digital to Analog Converter |
The AESDA provides extremely high quality AES Digital to Analog conversion while providing diagnostic analysis of the incoming digital signal to help in troubleshooting signal faults.
|
|
AESQbox |
Signal Tester |
Generate into or monitor from your AES digital sound system with this handy tool.
|
|
AS8X4 |
Active Splitter |
The AS8X4 active splitter is a 1 rack space, 8-channel active microphone splitter providing 4 isolated outputs per channel.
|
|
ASE12X12X4 |
12x12x4-inches Optional NEMA Gray Electrical Backbox for Flush Mount Frames |
These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the appearance of your installation.
|
|
ASE8X8X4 |
8x8x4-inches Optional NEMA Gray Electrical Backbox for Flush Mount Frames |
These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the appearance of your installation.
|
|
Bass Ten |
10 Band Equalizer FX Pedal |
Hottest new 10 band equalizer FX pedal designed exclusively for the bass guitar.
|
|
Battle Flex Fiber Optic Cable |
Fiber Optic Cable in Both Single and Multimode |
Whirlwind is proud to introduce Battle Flex, the worlds toughest fiber optic cable made.
|
|
BB12X12X4B |
12x12x4-inches Optional Whirlwind Black Powder Coated Backbox for Surface Mount Frames |
These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the appearance of your installation.
|
|
BB8X8X4B |
8x8x4-inches Optional Whirlwind Black Powder Coated Backbox for Surface Mount Frames |
These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the appearance of your installation.
|
|
BCJ-XJ-TRB |
XLR-F to BNC Adapter |
The Canare BCJ-XJ-TRB (XLR-F to BNC) adapter is a cost-effective solution for long cable runs over coaxial cable as opposed to the attenuation of twisted pair at digital frequencies.
|
|
BCJ-XP-TRB |
XLR-M to BNC Adapter |
The Canare BCJ-XP-TRB (XLR-M to BNC) adapter is a cost-effective solution for long cable runs over coaxial cable as opposed to the attenuation of twisted pair at digital frequencies.
|
|
BK08 |
Punched Black Boxes with 8 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
BK12 |
Punched Black Boxes with 12 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
BK16 |
Punched Black Boxes with 16 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
BK20 |
Punched Black Boxes with 20 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
BK28 |
Punched Black Boxes with 28 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
BK32 |
Punched Black Boxes with 32 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
BKMINI12 |
2-inch Punched Black Boxes with 12 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
BKMINI6 |
Punched Black Boxes with 6 Connectors Installed |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
Bomb |
Volume/Gain Pedal |
This power house of a pedal couldn't be simpler, one knob dials your volume boost from 1 to 11, which takes you from a gentle increase in volume and gain, for those subtle acoustic solos, all the way to eleven giving you as much boost as you can handle.
|
|
BP-200 |
200A Main Breaker Panel |
200A main breaker panel.
|
|
Cab Driver |
Speaker Component Checker |
The CAB DRIVER is a test device for checking the operation of the speaker components within enclosures.
|
|
CI2L |
2-channel Analog Input Module |
The CI2L is Whirlwind's 2-channel CobraNet line level input module.
|
|
CI8M |
8-channel Microphone Preamp Module |
The CI8M is Whirlwind's premium, standalone, 8-channel CobraNet microphone preamp module.
|
|
CIA |
Computer Interface Alternative Rack Mounted Unit |
This rack mounted unit replaces a standard Windows PC for controlling the E Snake and ES2 when used with YAMAHA digital consoles with HA remote capabilities.
|
|
CO2a |
2 Channel CobraNet Output Module |
The CO2a is Whirlwind's 2-channel CobraNet output module.
|
|
CO8a |
8-channel Analog Line Out Module |
The CO8A is Whirlwind's 8-channel CobraNet output module.
|
|
COMMANDER2 |
Two-channel Instrument Switcher with Built-in DI |
For those that need to switch between instruments and want the ability to employ a programmable boost for fills and solos, Whirlwind introduces the Commander 2, a two-channel instrument switcher, booster, feedback eliminator and tuner with built-in DI.
|
|
Concert 40 |
32 WC3F XLR Microphone Inputs and 8 WC3M XLR Returns Mic Splitting Systems |
The Whirlwind Concert Series mic splitting systems include the most requested options for splitter boxes and panels for concert audio.
|
|
Concert 56 |
Super Concert System |
The Whirlwind Concert Series mic splitting systems include the most requested options for splitter boxes and panels for concert audio.
|
|
Concert 56NR |
Super Concert System |
The Whirlwind Concert Series mic splitting systems include the most requested options for splitter boxes and panels for concert audio.
|
|
Connect Series Studio Stands |
Pro-grade Stand |
We’re proud to introduces the newest addition to our Connect Series line of pro-grade stands, with our Studio line featuring the STND-SSBD stand with collapsible tripod dolly.
|
|
CP-01 |
Six 20A Magnetic Breaker |
Six 20A magnetic breakers with six 20A Edison duplex outlets, and an indicator light for each circuit.
|
|
CP-02 |
Six 20A Magnetic Breakers with Three L14-20 Twist-Lock Connectors |
Six 20A magnetic breakers with three L14-20 twist-lock connectors, and an indicator light for each circuit.
|
|
CP-03 |
Six 20A Magnetic Breakers with One 19-pin Socapex Female Connector |
Six 20A magnetic breakers with one 19-pin Socapex female connector, and an indicator light for each circuit.
|
|
CP-04 |
Nine 20A Magnetic Breakers |
Nine 20A magnetic breakers with three L21-20 twist-lock connectors, and an indicator light for each circuit.
|
|
CP-05 |
Nine 30A Magnetic Breaker |
Nine 30A magnetic breaker with three L21-30 twist-lock connectors, and an indicator light for each circuit.
|
|
Custom Fiber Optic Box |
Fiber Optic Box |
Whirlwind's legendary Custom Dept is your one stop shop for Fiber Optic cables, panels and boxes, making the possibilities as vast as your imagination.
|
|
Custom Fiber Optic Rack Panel |
Fiber Optic Rack Panel |
Whirlwind's legendary Custom Dept is your one stop shop for Fiber Optic cables, panels and boxes, making the possibilities as vast as your imagination.
|
|
DA-2 |
Audio Distribution Amplifier |
The DA-2 drives multiple isolated line feeds from a single input source.
|
|
DA-2M |
Two Channel Analog Audio Distribution Amplifier |
The US Audio DA-2M is professional quality two channel analog audio distribution amplifier.
|
|
Data Snake |
Data Snake with Either Neutrik Cat5e or Cat6 Connectors |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin® on the fanouts for ultimate fanout protection.
|
|
DCS88 |
CobraNet© Digital Audio Transceiver Module |
The DCS (Digital Contract Series) products by Whirlwind are the first low power CobraNet compatible transceivers.
|
|
DCSP1 |
Phantom Power Supply |
The Whirlwind DCSP1 provides phantom power for condenser microphones when used with the SPC Series Splitters.
|
|
DCT-9 |
Digital Cable Tester |
The DCT-9 cable tester is a fast and accurate way to automatically test many varieties of cables.
|
|
DesignPRO Software |
Free Downloadable Software |
DesignPRO is Whirlwind's new free downloadable software by StarDRAW® which allows you to custom design your own Distro, panels, plates or boxes and submit them directly to us for quotation.
|
|
Di2 |
Hard Wired 2-Channel DI |
If you've ever wired a stage with multiple DIs, then you already love the DI2.
|
|
DIRECT-JT |
Direct Box with Jensen® Transformer |
Direct Box converts a high impedance signal to a low impedance signal.
|
|
DIRECT2-JT |
Dual Direct Box Built with Jensen Transformers |
The DIRECT2-JT is Whirlwind's premium Dual Direct box, built with Jensen transformers.
|
|
DIRECT2™ |
Passive Dual Direct Box |
The DIRECT2 combines features found on two of our DIRECTOR ® direct boxes in one unit.
|
|
DIRECT4 |
4 Direct Boxes |
The DIRECT4 combines features found on four of our DIRECTOR ® direct boxes in one unit.
|
|
Director Plus |
Direct Box Transformer |
Whirlwind engineers set out to create a premium quality Direct Box transformer that would rival the performance of DIs costing many times more.
|
|
DIRECTOR® |
1/4-inch Parallel Wired Premium Direct Box |
This premium direct box converts an unbalanced line, instrument or speaker level signal to low impedance balanced mic level.
|
|
DMX 35 |
DMX Cable Tester |
This cable tester checks 3 and 5 pin XLR DMX lighting cables and also indicates the presence of the DMX DATA signal when connected to a functioning control line.
|
|
DMX 35T |
DMX Cable Tester |
This cable tester checks 3 and 5 pin XLR DMX lighting cables and also indicates the presence of the DMX DATA signal when connected to a functioning control line.
|
|
Doghouse |
MASS Connector Plate |
Just mount this angled MASS connector plate somewhere in the doghouse, usually behind the console.
|
|
DrumDrop |
Stage Box |
Drumdrop stagebox features four XLR inputs on the box for overheads, vocals, nearby backline inputs, etc.
|
|
DS168R |
16 Inputs and 8 Returns Digital Snake |
Digital snake with 16 inputs and 8 returns.
|
|
DS168T |
32 Inputs and 8 Returns Digital Snake |
Digital snake with 32 inputs and 8 returns.
|
|
DS328R |
Digital Snake Receiver |
Digital snake receiver.
|
|
DS328T |
Digital Snake Transmitter |
Digital snake transmitter.
|
|
DT12CF |
Chassis Female Socket with Locking Ring |
The broadcast industry has standardized the DT12 wiring configuration based on the Cannon FK-37 connector.
|
|
DT12CM |
Chassis Male Pin with Locking Threads |
The broadcast industry has standardized the DT12 wiring configuration based on the Cannon FK-37 connector.
|
|
DT12IF |
Inline Female Socket with Locking Ring and Backshell |
The broadcast industry has standardized the DT12 wiring configuration based on the Cannon FK-37 connector.
|
|
DT12IM |
Inline Male Pin with Locking Threads and Backshell |
The broadcast industry has standardized the DT12 wiring configuration based on the Cannon FK-37 connector.
|
|
E BEAM |
Passive Laser Antenna and Media Converter |
The Whirlwind E BEAM is a system for transporting Ethernet, CobraNet™ and EtherSound™ data, either point-to-point or cascaded, over a modulated Class One IR laser beam.
|
|
E Desk |
Hardware and Software-Based Digital Audio Platform |
Whirlwind's E Desk is a hardware and software based digital audio platform that provides multi-channel audio processing in analog and CobraNet® applications.
|
|
E Snake System |
Audio Snake |
The main components of the Whirlwind E Snake™ system consist of E Snake Frames (ESF), E Snake 2 units (ES2) and E Snake Control™ software for managing the system.
|
|
edb1 |
Economy Direct Box |
An imported economy direct box offering rugged construction while maintaining exceptional sound quality.
|
|
ENC1 |
Heavy Duty CAT-5e Cable |
Special CAT-5 cable that can stand up to heavy duty use and abuse - such as FOH to amp racks or with the Whirlwind E Snake.
|
|
ENGRAVING SERVICES |
Laser Engraves |
Laser engraving makes the right impression and it's affordable.
|
|
ES2 |
16-channel Version of E Snake |
A 16-channel version of E Snake.
|
|
ES2-ES |
16-channel Version of E Snake with EtherSound |
A 16-channel version of E Snake with EtherSound.
|
|
ES3 |
Affordable Digital Snake with CobraNet |
E Snake's studio quality mic preamps and powerful remote control features make it and digital consoles a potent combination.
|
|
ES3-ES |
Affordable Digital Snake with EtherSound |
E Snake's studio quality mic preamps and powerful remote control features make it and digital consoles a potent combination.
|
|
ES4 |
Multi-Platform Audio Transport System |
The ES4 system offers sixteen channels of professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats.
|
|
ESP1 |
Power Supply |
ESP1 powers individual E Snake frames or can be used as redundant power for E Snake 2.
|
|
Fiber Optic opticalCon - Duo |
2 Neutrik OpticalCON Duo Connector |
2 Neutrik OpticalCON Duo connectors terminated to any size you need.
|
|
Fiber Optic opticalCon Quad |
2 Neutrik OpticalCON Quad Connectors |
Fiber Optic opticalCon - opticalCon Quad cable-2 Neutrik OpticalCON Quad connectors terminated to any size you need.
|
|
Fiber Optic Tactical Cable |
Neutrik Certified OpticalCon Assembler |
Our Fiber Optic cables are wired using tactical Fiber Optic cable.
|
|
FL-500P |
Raised Floor Box with Lift Off Cover |
Designed for rooms with carpeted floors over concrete.
|
|
FL-540P |
Raised Floor Box with a Mounting Flange |
FSR Floor Pockets are designed to fit the needs of power, audio, video, and data applications and provide a practical solution for cable storage while maintaining easy access.
|
|
FM Series |
Fanouts |
These fanouts have an inline multipin connector at one end and a fanout at the other with WI3M male XLRs on input channels and WI3F female XLRs or 1/4" TRS connectors on return channels.
|
|
FP-1 |
Floor Pocket |
Whirlwind supplies several sizes of floor pockets to protect and provide access to audio, video and AC connectors.
|
|
FP-1BB |
Back Box for FP-1 Floor Pocket |
Whirlwind supplies several sizes of floor pockets to protect and provide access to audio, video and AC connectors.
|
|
FP-1BB6 |
Floor Boxes |
Whirlwind supplies several sizes of floor pockets to protect and provide access to audio, video and AC connectors.
|
|
FP-2 |
Floor Pocket, Permit Flush Installation for Safe, Reliable Connections |
Constructed of 11 gauge steel, the FP-1 and FP-2 permit flush installation for safe, reliable connections.
|
|
FP-2BB |
Optional Back Box |
Whirlwind supplies several sizes of floor pockets to protect and provide access to audio, video and AC connectors.
|
|
FP-2BB6 |
6x12x6-inches Floor Box |
Whirlwind supplies several sizes of floor pockets to protect and provide access to audio, video and AC connectors.
|
|
FP-3 |
Floor Pocket with One Interchangeable Panel on One End |
Whirlwind FP-3 unit feature removable bottom and end panel(s) to facilitate custom punching and engraving.
|
|
FP-3BB6 |
10x10x6-inch Deep Optional Back Box for FP-3 |
10x10x6-inch deep optional back box for FP-3.
|
|
FP-3BB8 |
10x10x8-inch Deep Optional Back Box for FP-3 |
10x10x8-inch deep optional back box for FP-3.
|
|
FP-4 |
Floor Pocket with Panels on Both Sides |
Whirlwind FP-4 unit feature removable bottom and end panel(s) to facilitate custom punching and engraving.
|
|
FP-4BB8 |
18x10x8-inch Deep Optional Back Box for FP-4 |
18x10x8-inch deep optional back box for FP-4.
|
|
FXEQB10P |
10 Band Equalizer FX Pedal for Bass Guitar |
10 band equalizer FX pedal designed exclusively for the bass guitar.
|
|
FXEQP10P |
10 Band Equalizer FX Pedal for Guitar and Keyboards |
10 band equalizer FX pedal for guitar and keyboards.
|
|
FXGOLDP |
Classic Handwired Tank Box |
This classic handwired tank of a box delivers a wide range of sonic distortion from a subtle, warm, tube-driven tone to balls-to-the-walls searing hot overdrive, with that vintage sustain and classic tone you grew up with.
|
|
FXORNP |
Swirling Edgy Phaser |
This handwired classic features select resistors paired with hand-matched components to achieve the same smooth and warm modulation as the original.
|
|
FXREDP |
Classic Smoothest Compressor |
The Red Box is a true classic and since its introduction in 1976 has been heard on countless landmark recordings.
|
|
HATT |
Table Top Active, Stereo Headphone Control Box |
This table top stereo, active, compact headphone amplifier provides headphone volume control for broadcast applications, recording studios, language labs, etc.
|
|
HATT4 |
Sonically Superior Four Output Stereo Headphone Amplifier |
The HATT4 is a sonically superior, four output stereo headphone amplifier.
|
|
HAUC |
Under Counter Active Stereo Headphone Control Box |
This stereo, active, compact headphone amplifier mounts under a table or counter and provides headphone volume control for broadcast applications, recording studios, language labs, etc.
|
|
HB1XL |
Passive Headphone Monitor Box |
The HB1XL is a professional quality, passive headphone monitor box.
|
|
HBB |
Passive Headphone Breakout Box |
Our passive headphone breakout box divides a standard power amplifier output to feed 6 separate headphone outputs.
|
|
HBB04UP |
6.223-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBB12UP |
10.223-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBB20UP |
14.223-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBB28UP |
18.223-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBB48UP |
16.225-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBB58UP |
22.225-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBBMINI12UP |
15-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBBMINI6UP |
8.375-inch Unpunched Black Box |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish.
|
|
HBL400F/BK |
Female Inline Single Pole Connector, Black |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400F/BL |
Female Inline Single Pole Connector, Blue |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400F/G |
Female Inline Single Pole Connector, Green |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400F/R |
Female Inline Single Pole Connector, Red |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400F/W |
Female Inline Single Pole Connector, White |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400M/BK |
Male Inline Single Pole Connector, Black |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400M/BL |
Male Inline Single Pole Connector, Blue |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400M/G |
Male Inline Single Pole Connector, Green |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400M/R |
Male Inline Single Pole Connector, Red |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBL400M/W |
Male Inline Single Pole Connector, White |
Whirlwind offers both pre made cable assemblies as well as bulk wire and connectors.
|
|
HBUC |
Under Counter Headphone Control Box |
This passive, compact box mounts under a table or counter and provides headphone volume control for broadcast applications, recording studios, language labs, etc.
|
|
HOTBOX |
Active Direct Box |
Our top-of-the-line DI is an active direct box that operates with batteries or phantom power.
|
|
HOTBOX QUAD |
Direct Box with Built-in Power Supply |
Four channels of HotBox performance come in a 1U rack package with built-in power supply.
|
|
HP1 |
Stereo Headphone |
Lightweight and comfortable design with soft foam earcups for extended listening comfort.
|
|
IMCOM |
IMP Combiner |
This versatile box is built with our premium TRSP-2 transformer for optimum durability.
|
|
IMCOML |
IMP Line Level Combiner |
Use the line level combiner when you want to create a mono mix from a stereo source but need to keep the original stereo signals isolated.
|
|
IMP 2 |
Pro Grade Direct Box |
The IMP 2 converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal.
|
|
IMP JT |
Wide Frequency Jensen Transformer |
This top of the line passive DI features a Jensen transformer - renown for wide frequency response and superior noise reduction.
|
|
IMPHR |
Male-to-Male XLR 3-pin Inline Device |
The phase reverse offers a temporary solution to fix a miswired mic or cable.
|
|
Insert Snakes |
Audio Snakes |
Our insert snakes are the professional solution for neatly dressing the cables between your console and outboard gear.
|
|
IP-01 |
Panel with Input and Output Pin |
Main panel with input and parallel output pin and sleeve connectors. Test points for ground, neutral, and each phase are also provided.
|
|
ISO 1 |
Line Level Audio Transformer Device |
The ISO1 is a one channel transformer isolation box and line balancer.
|
|
ISO-2 |
Two Channel Isolation Box and Line Balancer |
The ISO-2 is a two channel isolation box and line balancer.
|
|
ISO-8 |
Line Level Isolator and Balancer |
The ISO-8 provides eight channels of high-quality line level isolation to eliminate hum and buzz from interacting gear.
|
|
ISO-8Q |
Line Level Isolator and Balancer |
The ISO-8Q provides eight channels of high-quality line level isolation to eliminate hum and buzz from interacting gear.
|
|
Isopod |
Line Level Summing Balancer IPod |
Safely sums to mono, and transformer isolates unbalanced 1/8” (3.5mm) stereo connections to balanced, XLR.
|
|
ISOXL |
Line Level Isolation Transformer |
This is a professional quality compact transformer in an XLR male/female tube for quick fix line isolation.
|
|
L1420-(length) |
12AWG L14-20 Male to L14-20 Female Cable |
12AWG L14-20 male to L14-20 female cable.
|
|
L1430-(length) |
12AWG L14-30 Male to L14-30 Female Cable |
12AWG L14-30 male to L14-30 female cable.
|
|
L2120-(length) |
12AWG L21-20 Male to L21-20 Female Cable |
12AWG L21-20 male to L21-20 female cable.
|
|
L2130-(length) |
12AWG L21-30 Male to L21-30 Female Cable |
12AWG L21-30 male to L21-30 female cable.
|
|
LBS |
Line Balancer/Splitter |
This handy tool balances and isolates a single line level signal or lets you send a line level signal to two destinations with transformer balancing and isolation.
|
|
LC Dual |
LC Dual Connectors |
LC dual connectors terminated to any size you need.
|
|
LC Single |
LC Single Connectors |
LC Single connectors terminated to any size you need.
|
|
LD410 |
Line Driver/Level Matcher |
The LD410 is both a professional quality, sonically superior -10 to +4dB to –10dB level converter and a flexible multichannel distribution amplifier.
|
|
LIFTER |
3-pin XLR Female-to-Male Inline Device |
Ideal for troubleshooting ground problems, this female-to-male XLR 3-pin inline device disconnects pin 1 between the connectors.
|
|
LITTLE IMP |
Female XLR to 1/4-inch TS Plug Inline Transformer |
This inline transformer with female XLR - 1/4" TS plug is the solution for making that connection.
|
|
LM2B |
Level Matching Device |
These handy boxes can be used to match consumer grade audio devices (-10dB) to pro equipment (+4dB).
|
|
LM2C |
Camera Microphone Adapter |
The whirlwind LM2C is a passive device that allows the connection of professional dynamic microphones or line level audio sources to the unbalanced stereo mic level inputs on video cameras or laptop computers.
|
|
LM2U |
40dBV Level Matching Device |
These handy boxes can be used to match consumer grade audio devices (-10dB) to pro equipment (+4dB).
|
|
LMPRE |
Single Channel Microphone Preamplifier |
The Whirlwind LMPRE is a convenient single channel microphone preamplifier with tone controls and a built in peak limiter.
|
|
MCT-7 |
Cable Tester |
This diagnostic cable tester has connectors for analyzing almost any type of cable combination.
|
|
MD-1 |
Portable Mic Preamp/Line Driver and Headphone Monitor |
The MD-1 is the ideal mic preamp for those who demand studio quality in a rugged, battery operated package.
|
|
MD-12-2-C5E-100 |
100ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C5E-150 |
150ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C5E-200 |
200ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C5E-25 |
25ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C5E-250 |
250ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C5E-50 |
50ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C6-100 |
100ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C6-150 |
150ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C6-200 |
200ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C6-25 |
25ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C6-250 |
250ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-12-2-C6-50 |
50ft Data Snake with 12 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C5E-100 |
100ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C5E-150 |
150ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C5E-200 |
200ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C5E-25 |
25ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C5E-250 |
250ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C5E-50 |
50ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C6-100 |
100ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C6-150 |
150ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C6-200 |
200ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C6-25 |
25ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C6-250 |
250ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-16-4-C6-50 |
50ft Data Snake with 16 XLR Inputs, 4 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C5E-100 |
100ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C5E-150 |
150ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C5E-200 |
200ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C5E-25 |
25ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C5E-250 |
250ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C5E-50 |
50ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C6-100 |
100ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C6-150 |
150ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C6-200 |
200ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C6-25 |
25ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C6-250 |
250ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-24-8-C6-50 |
50ft Data Snake with 24 XLR Inputs, 8 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C5E-100 |
100ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C5E-150 |
150ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C5E-200 |
200ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C5E-25 |
25ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C5E-250 |
250ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C5E-50 |
50ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat5e Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C6-100 |
100ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C6-150 |
150ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C6-200 |
200ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C6-25 |
25ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C6-250 |
250ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MD-6-2-C6-50 |
50ft Data Snake with 6 XLR Inputs, 2 XLR Returns and 2 Cat6 Ethercon |
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, 20, and 32 pair cable with SnakeSkin®.
|
|
MDSPL |
Cover Plate |
The MDSPL is a small black plate for covering unused XLR holes in boxes and panels.
|
|
MDSPL 1/4 |
Panel Cover Plate |
The MDSPL 1/4" has a 1/2" round hole to facilitate mounting a Switchcraft #11 (1/4") jack with isolation washers.
|
|
MDSPLEH |
Panel Cover Plate for Covering an EP or NL8MPR Connector Hole |
The MDSPLEH provides a black plate for covering an EP or NL8MPR connector hole.
|
|
MDSPLND |
Panel Cover Plate for Neutrik "D" Holes |
The MDSPLND provides a covering for Neutrik "D" holes.
|
|
Medusa Elite®. |
Updated Medussa Audio Snakes Box |
The Medusa Elite offers the same features as our Medusa Standard series with the addition of SnakeSkin® on the fanouts for ultimate fanout protection.
|
|
Medusa MultiSnake |
Audio Snake w/ Built-in DI Boxes |
The Medusa MultiSnake is perfect for organizing acoustic instruments, keyboards and vocal frontlines.
|
|
Medusa MultiSnake10 |
10-channel Audio Snake w/ Built-in DI Box |
The Medusa MultiSnake10 represents our next step in multi-function drop snakes.
|
|
Medusa Power Series |
Audio Snakes with Built-in Power Amplifiers |
The Medusa Power Series is designed specifically for use with mixing boards that incorporate built-in power amplifiers.
|
|
Medusa Snake with Integ. Reel |
Audio Snake with Integrated Reel |
Some pre-manufactured reels (like Whirlwind's WD-5) have a built in tray on the bottom for storing the stage box.
|
|
Medusa Standard Series |
Audio Snakes with Integrated Handle |
Whirlwind's Medusa Series Snakes have been the touring standard worldwide for decades.
|
|
Micmute PM |
Push to Mute Switch |
The Micmute PM is configured as Push to Mute switch, meaning that the input signal is normally on, passing through the box.
|
|
Micmute PMD |
Heavy Duty Push to Mute Footswitch |
The Micmute PMD is configured as Push to Mute switches, meaning that the input signal is normally on, passing through the box.
|
|
Micmute PP |
Latching Push ON Push OFF Switch |
The Micmute PP is configured as latching Push On; Push Off switches, meaning that the switch must be pushed and released to turn the signal on or off through the box.
|
|
Micmute PPD |
Finger Operated Version Latching Push ON Push OFF Switch for Desktop Use |
The Micmute PPD is configured as latching Push On; Push Off switches, meaning that the switch must be pushed and released to turn the signal on or off through the box.
|
|
Micmute PT |
Heavy Duty Push to Talk Footswitch |
The Micmute PT is configured as Push to Talk switches, meaning that the input signal is normally not connected to the output; nothing is passing through the box.
|
|
Micmute PTD |
Push to Talk Switch |
The Micmute PT is configured as Push to Talk switches, meaning that the input signal is normally not connected to the output; nothing is passing through the box.
|
|
MicPower |
Phantom Power Supply |
The MicPower provides a quality portable source of 12-18V phantom power.
|
|
MICPOWER 2 |
Premium Stereo Phantom Power Supply |
The Whirlwind Micpower 2 (MICP2) is a premium stereo phantom power supply.
|
|
MICPOWER 4 |
Premium 4-channel Stereo Phantom Power Supply |
The Whirlwind MICPOWER 4 (MICP4) is a premium 4 channel stereo phantom power supply.
|
|
MINI-12 |
12-channel Low Profile Audio Drop Snake |
The MINI-12 is a ideal drop snakes for cleaning up cable runs in the studio or on stage.
|
|
MINI-6 |
6-channel Low-Profile Audio Drop Snake |
The MINI-6 is a ideal drop snake for cleaning up cable runs in the studio or on stage.
|
|
MIP1 |
Two Gang Wallplate with a Mono Version |
The MIP1 is a two gang wallplate with a mono version of the Whirlwind pcDI computer interface device featuring RCA and 3.5mm stereo input jacks and an additional speaker input terminated with a 16 ohm load resistor.
|
|
MIP2 |
One Gang Wallplate with a Mono Version |
The MIP2 is a one gang wallplate with a mono version of the Whirlwind pcDI computer interface device featuring RCA and 3.5mm stereo input jacks.
|
|
MIP3 |
3.5mm TRS Inputs One Gang Wallplate |
The MIP3 is a one gang wallplate version of the Whirlwind podMIX passive mixing device, combining a microphone with a stereo line level audio source into a single mic level output.
|
|
MIP4 |
Wall Plate for Interfacing the Outputs of CD Players |
This product (A wall plate version of our popular pcDI) is perfect for interfacing the outputs of CD players, computer sound cards, iPODs®/MP3 players, tape decks, etc.
|
|
MIX-16 |
Audio Mix 16 Line Mixer |
The MIX-16 was designed for use in broadcast production, monitoring, and wherever large numbers of balanced inputs are required in a minimum amount of space.
|
|
MIX-5 |
Mono Mixer |
The MIX-5 is a mono version of the MIX-5S.
|
|
MIX-5S |
Stereo Mixer |
This professional-quality, all-purpose mixer is ideal for sound contracting, broadcasting, sub-mixing, paging, and PA applications.
|
|
MIX-6 |
1U Mixer with 4 Reference-quality Mic Pre-amplifiers |
The MIX-6 is a broadcast-quality, 1U mixer with 4 reference-quality mic pre-amps, pan controls, 48V phantom power, and low-cut switches.
|
|
MIX-8S |
Stereo Line Mixer |
The MIX-8S provides 8 stereo balanced line level inputs in an economical, space-saving package for broadcast audio mix-minus and studio monitoring of multiple stereo feeds.
|
|
MK4PP |
Dual XLR Mic Cable |
Dual, high quality XLR mic cables, convenient for running stereo audio.
|
|
MLTDIR |
Four Channel Rack Mount |
The Whirlwind MULTI DIRECTOR® is a four channel rack mount version of the popular DIRECTOR® direct box.
|
|
MLTSELAMPR |
Multiselector with MultiSelector PRO and 4X |
The optional MultiSelector Remote “stomp box” style footswitches contains four switches that remotely control the switching functions of the rack mount units using a regular 3-pin XLR microphone cable.
|
|
MLTSELPRO4XR |
Multiselector with MultiSelector AMP |
The optional MultiSelector Remote “stomp box” style footswitches contains four switches that remotely control the switching functions of the rack mount units using a regular 3-pin XLR microphone cable.
|
|
MLTSP1X2 |
Multisplitter, 1 Direct, 1 Isolated |
Four channels of passive and isolated microphone splitting in a single space rack panel.
|
|
MLTSP1X3 |
Multisplitter, 1 Direct, 2 Isolated |
Four channels of passive and isolated microphone splitting in a single space rack panel.
|
|
MPB-28 |
28-channel Mini Punch Block |
The multiple mounting hole sets permit easy mounting on standard hole centers and included tie wraps can be used to dress incoming wires.
|
|
MPB-58 |
58-channel MASS Punch Block |
The multiple mounting hole sets permit easy mounting on standard hole centers and included tie wraps can be used to dress incoming wires.
|
|
MPB16 |
16-channel Micro Punch Block |
The multiple mounting hole sets permit easy mounting on standard hole centers and included tie wraps can be used to dress incoming wires.
|
|
MPM1 |
Music Paging Mixer |
Switch between three sets of RCA phono type composite video and stereo audio inputs with push buttons located on the front of the unit (video and audio with the MPM1V, audio only with the MPM1).
|
|
MPM1RV |
Remote Control |
This control adjusts the main volume of all outputs except paging, from a remote location.
|
|
MPM1V |
Auto-Paging Mixer |
The MPM1V manages video, audio and provide paging in a single zone application.
|
|
MPM1V |
Auto-Paging Mixer |
The MPM1V manages video, audio and provide paging in a single zone application
|
|
MPM4 |
Multi-zone Program and Paging Management System |
The MPM4 zone mixer and paging manager represents a new way for installers to easily implement a multi-zone audio solution in a wide variety of applications.
|
|
MPMSC |
Security Cover |
This optional accessory plate keeps the controls safe and secure from adjustment by unauthorized personnel.
|
|
MRLG |
Cable Reel |
These reels are lightweight and economical.
|
|
MRSM |
Cable Reels |
These reels are lightweight and economical.
|
|
MT Series |
Digital Console Multitrack Snakes |
We build a complete range of Snakes and patchbay interfaces for the most popular digital mixers and Modular Digital Multitracks (MDMs).
|
|
MULTISEL AMP |
1x4 Amplifier Switcher |
The MultiSelector AMP is a state of the art unidirectional 1-to-4 instrument amp switcher that silently switches one instrument to multiple amps, with complete isolation between amplifiers.
|
|
MULTISEL PRO |
4x1 Instrument Switcher |
The MultiSelector PRO is a state of the art unidirectional 4-to-1 instrument switcher.
|
|
Multiselector |
Input/Output Footswitch |
This four channel input/output footswitch gives one-step access to your instruments and amps.
|
|
MULTISELECTOR 4X |
4-channel Input/Output Footswitch |
This four channel input/output footswitch gives one-step access to your instruments and amps.
|
|
Multitrack Medusa Series |
Multitrack Audio Snake |
The Medusa Multitrack (MT) Series is designed to interface multitrack recorders or outboard equipment to mixing consoles.
|
|
NAC3- 515P-(length) |
Male Hubble Edison to Neutrik Powercon Inlet Cable |
Male hubble edison to neutrik powercon inlet cable.
|
|
NAC3-(length) |
Neutrik Powercon® Inlet to Neutrik Powercon Outlet Link Cable |
Powercon® inlet to Powercon® outlet for linking PL1-420 boxes together, and with PL1DI distro interface boxes.
|
|
OC BASS |
Optical Bass Compressor |
The OC BASS Optical Compressor is both a compressor, as well as a limiter - (depending on how you have it switched).
|
|
OpticalCON powerMONITOR |
Monitoring Device |
The opticalCON powerMONITOR is a cost-saving, purpose-built measurement (monitoring) device for professional fiber optic broadcast, audio and video applications.
|
|
PB06 |
6.75-inch Passive Press Box |
The PB Series expands mic outputs when used with line outs on PRESSPOWER2 or PRESSMITE active press boxes or any time a line level feed is available.
|
|
PB12 |
11-inch Passive Press Box |
The PB Series expands mic outputs when used with line outs on PRESSPOWER2 or PRESSMITE active press boxes or any time a line level feed is available.
|
|
PB24 |
9.5-inch Passive Press Box |
The PB Series expands mic outputs when used with line outs on PRESSPOWER2 or PRESSMITE active press boxes or any time a line level feed is available.
|
|
pcDI® |
Dual Channel Stereo Direct Box |
The Whirlwind pcDI is perfect for interfacing the outputs of CD players, computer sound cards, iPODs®/MP3 players, tape decks, etc. with professional, balanced, low impedance equipment.
|
|
PCDIQ |
4-channel Version Rack Mount Enclosure |
The pcDIQ is a four-channel version of Whirlwind’s popular pcDI in a single space, rack mount enclosure.
|
|
Perfect Ten |
10 Band Equalizer Pedal |
Hottest new 10 band equalizer FX pedal for guitar and keyboards.
|
|
PK |
Prewire Kits |
These kits have a chassis-mount multipin connector prewired to individually identified lines for permanent installation into your system.
|
|
PL-PM1 |
Power Monitor |
The PL-PM1 Power Monitor is intended to monitor 3 phase Y power with 3 120 Volt AC legs or single phase with 2 120 Volt AC legs.
|
|
PL1-420- BL |
20A Portable Power Distribution Box, Blue |
Portable power distribution box.
|
|
PL1-420- RD |
20A Portable Power Distribution Box, Red |
Portable power distribution box.
|
|
PL1-420-BK |
20A Portable Power Distribution Box, Black |
Portable power distribution box.
|
|
PL1-420-FB |
Flying Bracket |
Accepts any clamp with a 1/2 inch mounting hole.
|
|
PL1-420-GFI |
Portable Power Distribution Box |
Portable power distribution box.
|
|
PL1-420-NAC3 |
Powercon Inlet and Powercon Outlet Power Distribution Box |
Portable power distribution box.
|
|
PL1-420-WH |
20A Portable Power Distribution Box, White |
Portable power distribution box.
|
|
PL1-420B-(color) |
20A Portable Power Distribution Box |
Portable power distribution box.
|
|
PL1-SPX-6PC |
Neutrik Powercon Circuit, 19-pin |
A 19 pin SOCAPEX male feeds (6) NAC3MPB 20A Neutrik Powercon® circuits.
|
|
PL1DI-L1420-000 |
Power Link with Optional Hubbell Disconnect |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-L1420-010 |
Power Link Single L14-20 to (2) 20A Outlets |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-L1430-000 |
Optional Hubbell Disconnect Power Link |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-L1430-010 |
Power Link Single L14-30 to (2) 20A Outlets |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-L2120-000 |
Power Link with Optional Hubbell Disconnect |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-L2120-010 |
Power Link Single L21-20 to (3) 20A Outlets |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-L2130-000 |
Optional Hubbell Disconnect Power Link |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-L2130-010 |
Power Link Single L21-30 to (3) 20A Outlets |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcment, AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PL1DI-SPX-000 |
19-pin Neutrik Powercon Circuit |
A 19 pin SOCAPEX male feeds (6) NAC3MPB 20A Neutrik Powercon® circuits.
|
|
PLA-001 |
1-RU Blank Plate |
1 blank plate rack unit.
|
|
PLA-002 |
2-RU Blank Plate |
2 blank plate rack unit.
|
|
PLA-003 |
3-RU Blank Plate |
3 blank plate rack unit.
|
|
PLB-101 |
6, 20A 1P Breaker Panel, 2-RU |
20A breaker panel, 2-RU.
|
|
PLB-102 |
9, 20A 1P Breaker Panel, 2-RU |
20A breaker panel, 2-RU.
|
|
PLB-103 |
12, 20A 1P Breaker Panel, 2-RU |
20A breaker panel, 2-RU.
|
|
PLB-104 |
18, 20A 1P Breaker Panel, 2-RU |
20A breaker panel, 2-RU.
|
|
PLB-105 |
24, 20A 1P Breaker Panel, 3-RU |
20A breaker panel, 3-RU.
|
|
PLB-106 |
3, 20A 2P Breaker Panel, 4-RU |
20A breaker panel, 4-RU.
|
|
PLB-107 |
6, 20A 2P Breaker Panel, 3-RU |
20A breaker panel, 3-RU.
|
|
PLB-108 |
9, 20A 2P Breaker Panel, 3-RU |
20A breaker panel, 3-RU.
|
|
PLB-109 |
12, 20A 2P Breaker Panel, 4-RU |
20A breaker panel, 4-RU.
|
|
PLB-110 |
20A 3P Breaker Panel, 3-RU |
20A breaker panel, 3-RU.
|
|
PLB-111 |
6, 20A 3P Breaker Panel, 3-RU |
20A breaker panel, 3-RU.
|
|
PLB-131 |
6, 30A 1P Breaker Panel, 2-RU |
30A breaker panel, 2-RU.
|
|
PLB-132 |
9, 30A 1P Breaker Panel, 2-RU |
30A breaker panel, 2-RU.
|
|
PLB-133 |
12, 30A 1P Breaker Panel, 2-RU |
30A breaker panel, 2-RU.
|
|
PLB-134 |
18, 30A 1P Breaker Panel, 2-RU |
30A breaker panel, 2-RU.
|
|
PLB-135 |
24, 30A 1P Breaker Panel, 3-RU |
30A breaker panel, 3-RU.
|
|
PLB-136 |
3, 30A 2P Breaker Panel, 3-RU |
30A breaker panel, 3-RU.
|
|
PLB-137 |
6, 30A 2P Breaker Panel, 3-RU |
30A breaker panel, 3-RU.
|
|
PLB-138 |
9, 30A 2P Breaker Panel, 3-RU |
30A breaker panel, 3-RU.
|
|
PLB-139 |
12, 30A 2P Breaker Panel, 4-RU |
30A breaker panel, 4-RU.
|
|
PLB-140 |
3, 30A 3P Breaker Panel, 3-RU |
30A breaker panel, 3-RU.
|
|
PLB-141 |
6, 30A 3P Breaker Panel, 3-RU |
30A breaker panel, 3-RU.
|
|
PLB-151 |
8, 50A 1P Breaker Panel, 2-RU |
50A breaker panel, 2-RU.
|
|
PLB-152 |
12, 50A 1P Breaker Panel, 2-RU |
50A breaker panel, 2-RU.
|
|
PLB-153 |
4, 50A 2P Breaker Panel, 3-RU |
50A breaker panel, 3-RU.
|
|
PLB-154 |
4, 50A 3P Breaker Panel, 3-RU |
50A breaker panel, 3-RU.
|
|
PLC-201 |
6, 20A 1P Combo Breaker Panel, 6 Duplex, 2-RU |
20A combo breaker panel.
|
|
PLC-202 |
6, 20A 1P Combo Breaker Panel, 6 NAC3MPB, 2-RU |
20A combo breaker panel.
|
|
PLC-203 |
6, 20A 1P Combo Breaker Panel, 6 NAC3FPX, 2-RU |
20A combo breaker panel.
|
|
PLC-204 |
6, 20A 1P Combo Breaker Panel, 3 Duplex, 3 NAC3MPB, 2-RU |
20A combo breaker panel.
|
|
PLC-205 |
6, 20A 1P Combo Breaker Panel, 3 Duplex, 3 NAC3FPX, 2-RU |
20A combo breaker panel.
|
|
PLC-206 |
6, 20A 1P Combo Breaker Panel, 3 NAC3MPB, 3 NAC3FPX, 2-RU |
20A combo breaker panel.
|
|
PLC-207 |
6, 20A 1P Combo Breaker Panel, 6 L5-20, 3-RU |
20A combo breaker panel.
|
|
PLC-208 |
6, 20A 1P Combo Breaker Panel, 1 SPX19CFP, 3-RU |
20A combo breaker panel.
|
|
PLC-209 |
12, 20A 1P Combo Breaker Panel, 2 SPX19CFP, 3-RU |
20A combo breaker panel.
|
|
PLC-211 |
6, 20A 1P Combo Breaker Panel, 3 L14-20, 3-RU |
20A combo breaker panel.
|
|
PLC-213 |
6, 20A 2P Combo Breaker Panel, 1 SPX19CFP, 208V, 3-RU |
20A combo breaker panel.
|
|
PLC-214 |
3, 20A 2P Combo Breaker Panel, 3 L6-20, 3-RU |
20A combo breaker panel.
|
|
PLC-215 |
9, 20A 1P Combo Breaker Panel, 3 L21-20, 3-RU |
20A combo breaker panel.
|
|
PLC-216 |
3, 20A 2P Combo Breaker Panel, 3 L14-20, 3-RU |
20A combo breaker panel.
|
|
PLC-217 |
3, 20A 3P Combo Breaker Panel, 3 L15-20, 3-RU |
20A combo breaker panel.
|
|
PLC-218 |
3, 20A 3P Combo Breaker Panel, 3 L21-20, 3-RU |
20A combo breaker panel.
|
|
PLC-231 |
6, 30A 1P Combo Breaker Panel, 3 L5-30, 3-RU |
30A combo breaker panel.
|
|
PLC-232 |
6, 30A 1P Combo Breaker Panel, 3 L14-30, 3-RU |
30A combo breaker panel.
|
|
PLC-234 |
9, 30A 1P Combo Breaker Panel, 3 L21-30, 3-RU |
30A combo breaker panel.
|
|
PLC-235 |
3, 30A 2P Combo Breaker Panel, 3 L6-30, 3-RU |
30A combo breaker panel.
|
|
PLC-236 |
3, 30A 2P Combo Breaker Panel, 3 L14-30, 3-RU |
30A combo breaker panel.
|
|
PLC-237 |
3, 30A 3P Combo Breaker Panel, 3 L15-30, 3-RU |
30A combo breaker panel.
|
|
PLC-238 |
3, 30A 3P Combo Breaker Panel, 3 L21-30, 3-RU |
30A combo breaker panel.
|
|
PLC-251 |
6, 50A 1P Combo Breaker Panel, 3 CS6369, 3-RU |
50A combo breaker panel.
|
|
PLC-252 |
3, 50A 2P Combo Breaker Panel, 3 CS6369, 3-RU |
50A combo breaker panel.
|
|
PLC-253 |
3, 50A 3P Combo Breaker Panel, 3 CS8369, 208V, 3-RU |
50A combo breaker panel.
|
|
PLD-ATA08 |
ATA Flight Case, 8-RU |
Custom designed rack available upon request. Distros will be quoted with standard UL listed, ATA flight case unless otherwise specified.
|
|
PLD-ATA12 |
ATA Flight Case, 12-RU |
Custom designed rack available upon request. Distros will be quoted with standard UL listed, ATA flight case unless otherwise specified.
|
|
PLD-ATA16 |
ATA Flight Case, 16-RU |
Custom designed rack available upon request. Distros will be quoted with standard UL listed, ATA flight case unless otherwise specified.
|
|
PLD-ATA20 |
ATA Flight Case, 20-RU |
Custom designed rack available upon request. Distros will be quoted with standard UL listed, ATA flight case unless otherwise specified.
|
|
PLI-401 |
Input Panel - 5 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-402 |
Input Panel - 5 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-403 |
Input Panel - 5 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-404 |
Input Panel - 5 Cam-Lok, 12 Circuits Per Leg, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-405 |
Input Panel - 5 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-406 |
Input Panel - 5 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-407 |
Input Panel - 10 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-408 |
Input Panel - 10 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-409 |
Input Panel - 10 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-410 |
Input Panel - 10 Cam-Lok, 12 Circuits Per Leg, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-411 |
Input Panel - 10 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-412 |
Input Panel - 10 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-413 |
Input Panel - 6 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-414 |
Input Panel - 6 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-415 |
Input Panel - 6 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-416 |
Input Panel - 6 Cam-Lok, 12 Circuits Per Leg, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-417 |
Input Panel - 6 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-418 |
Input Panel - 6 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-419 |
Input Panel - 12 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-420 |
Input Panel - 12 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-421 |
Input Panel - 12 Cam-Lok, 12 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-422 |
Input Panel - 12 Cam-Lok, 12 Circuits Per Leg, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-423 |
Input Panel - 12 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-424 |
Input Panel - 12 Cam-Lok, 12 Circuits Per Leg, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-431 |
Input Panel - 5 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-432 |
Input Panel - 5 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-433 |
Input Panel - 5 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-434 |
Input Panel - 5 Cam-Lok, 24 Circuits Per Leg, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-435 |
Input Panel - 5 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-436 |
Input Panel - 5 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-437 |
Input Panel - 10 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-438 |
Input Panel - 10 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-439 |
Input Panel - 10 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-440 |
Input Panel - 10 Cam-Lok, 24 Circuits Per Leg, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-441 |
Input Panel - 10 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-442 |
Input Panel - 10 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-443 |
Input Panel - 6 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-444 |
Input Panel - 6 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-445 |
Input Panel - 6 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-446 |
Input Panel - 6 Cam-Lok, 24 Circuits Per Leg, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-447 |
Input Panel - 6 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-448 |
Input Panel - 6 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, Rev Neu, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-449 |
Input Panel - 12 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-450 |
Input Panel - 12 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-451 |
Input Panel - 12 Cam-Lok, 24 Circuits Per Leg, PM1-Ready, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-452 |
Input Panel - 12 Cam-Lok, 24 Circuits Per Leg, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-453 |
Input Panel - 12 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLI-454 |
Input Panel - 12 Cam-Lok, 24 Circuits Per Leg, Rev Gnd, Rev Neu, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLM-601 |
100A Main Breaker, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLM-602 |
200A Main Breaker, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-801 |
Output Panel - 6 20A Duplex, 2-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-802 |
Output Panel - 6 NAC3MPB, 2-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-803 |
Output Panel - 3 NAC3FPX, 2-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-804 |
Output Panel - 3 Duplex, 3 NAC3MPB, 2-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-805 |
Output Panel - 3 Duplex, 3 NAC3FPX, 2-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-806 |
Output Panel - 3 NAC3MPB, 3 NAC3FPX |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-807 |
Output Panel - 6 L5-20, 3 RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-808 |
Output Panel - 6 L14-20, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-809 |
Output Panel - 6 L15-20, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-810 |
Output Panel - 6 L21-20, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-811 |
Output Panel - 1 SPX19CFP, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-812 |
Output Panel - 2 SPX19CFP, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-813 |
Output Panel - 3 SPX19CFP, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-814 |
Output Panel - 4 SPX19CFP, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-821 |
Output Panel - 6 L6-20, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-822 |
Output Panel - 6 L14-20, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-823 |
Output Panel - 6 L14-20, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-824 |
Output Panel - 1 SPX19CFP, 208V, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-825 |
Output Panel - 2 SPX19CFP, 208V, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-826 |
Output Panel - 3 SPX19CFP, 208V, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-827 |
Output Panel - 4 SPX19CFP, 208V, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-828 |
Output Panel - 6 L21-20, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-831 |
Output Panel - 6 L5-20, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-832 |
Output Panel - 6 L14-30, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-833 |
Output Panel - 6 L15-30, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-834 |
Output Panel - 6 L21-30, Single-Phase Circuits, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-835 |
Output Panel - 6 L6-30, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-836 |
Output Panel - 6 L14-30, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-837 |
Output Panel - 6 L15-30, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-838 |
Output Panel - 6 L21-30, 3-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-851 |
Output Panel - 4 CS6369, Single-Phase Circuits, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-852 |
Output Panel - 4 CS6369, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLO-853 |
Output Panel - 4 CS8369, 4-RU |
Made in the USA using light weight aluminum panels, premium, fast response magnetic circuit breakers, and top of the line components.
|
|
PLR-RE06 |
Rack Enclosure, 6-RU |
The PLR-RE06 is a 6U rack enclosure for Powerlink Power Distribution System.
|
|
PLR-RE08 |
Rack Enclosure, 8-RU |
The PLR-RE08 is a 8U rack enclosure for Powerlink Power Distribution System.
|
|
PLR-RE12 |
Rack Enclosure, 12-RU |
The PLR-RE12 is a 12U rack enclosure for Powerlink Power Distribution System.
|
|
PLR-RE16 |
Rack Enclosure, 16-RU |
The PLR-RE16 is a 16U rack enclosure for Powerlink Power Distribution System.
|
|
podDI |
Single Output Summing Direct Box |
The podDI is a single output summing direct box. Use it to connect CD and MP3 players, computer sound card outputs, DJ mixers, etc. to professional equipment with balanced inputs such as a mixing console.
|
|
podMIX |
Passive Mixer with Ground Lift Switch |
The podMIX is a passive mixer that combines a microphone with a stereo, line level audio source and reduces them to mic level for connection to a single channel input of a sound system.
|
|
Power Link |
UL Listed Tactical Power Distribution System |
Encased in 0.074” powder coated, cold-rolled steel, Power Link is designed for live sound reinforcement,AV rental, or any event that requires multiple, industrial-strength power drops.
|
|
PR-1 |
Punched Rack Panel |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PR-1ND |
1.75-inch Punched Neutrik D Panel |
Panels are made of .090-inch thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PR-2 |
3.5-inch Punched Rack Panel |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PR-2ND |
3.5-inch Punched Neutrik D Panel |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PR-3 |
Punched Rack Panel |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PR-3ND |
Punched Neutrik D Panel |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PR-4 |
Punched Rack Panel |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PR-4ND |
Punched Neutrik D Panel |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
PRESSMITE |
Active Press Feed Distribution Box |
This compact, active press feed distribution box distributes 12 high-quality mic level signals and 2 line level signals.
|
|
PRESSPOWER 2 |
Active Press Box |
PRESSPOWER 2 features 2 mic/line inputs with individual gain controls and 16 transformer isolated outputs that are individually switchable for mic or line level operation.
|
|
PS9V-EFX |
9 Volt Power Supply |
9 Volt power supply for all of our pedal effects as well as our Selector AB box.
|
|
PXP |
Protocol Exchange Platform |
The Whirlwind PXP allows you to convert digital audio to and from the major transport protocols on your digital audio network.
|
|
PXP-CA |
CobraNet to Aviom A-Net Pro-16 Protocol Exchange Platform |
The PXP-CA CobraNet digital audio signal is converted to Aviom's A-Net Pro-16, which is output to interface with A-Net enabled equipment.
|
|
PXP-CE |
16-Channels Bi-directional Cobranet to EtherSound Protocol Exchange Platform |
The PXP-CE is a bidirectional bridge between CobraNet and EtherSound. The PXP-CE will process and convert sixteen channels of digitized audio to/from each format.
|
|
PXP-EA |
EtherSound to Aviom A-Net Pro-16 Protocol Exchange Platform |
The PXP-EA is configured with EtherSound as the input. EtherSound digital audio is converted to Aviom's A-Net Pro-16 format, which is output to A-Net enabled equipment.
|
|
PYROBOX |
Pyrotechnic Network Expander |
The Whirlwind PYROBOX is a specially designed and built interface for distributing signals in professional computer controlled fireworks displays.
|
|
Qbox (REV2) |
Mic/Line Tester |
Generate into or monitor from your analog sound system at ANY point with this one indispensible tool.
|
|
R-1 |
Unpunched Rack Panel - 1 Rack Space |
Whirlwind offers rack panels in EIA 19" standard sizes.
|
|
R-2 |
Unpunched Rack Panel - 2 Rack Space |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
R-3 |
Unpunched Rack Panel - 3 Rack Space |
Whirlwind offers rack panels in EIA 19" standard sizes.
|
|
R-4 |
Unpunched Rack Panel - 4 Rack Space |
Whirlwind offers rack panels in EIA 19" standard sizes.
|
|
R-5 |
Unpunched Rack Panel - 5 Rack Space |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
R-6 |
Unpunched Rack Panel - 6 Rack Space |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
REP-2 |
Punched EP/NL Rack Panel - 2 Holes |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
REP-4 |
Punched EP/NL Rack Panel - 4 Holes |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
REP-6 |
Punched EP/NL Rack Panel - 6 Holes |
Panels are made of .090" thick 5052 aluminum with bent flanges for rigidity and have a brushed black anodized finish.
|
|
RMH-100 |
Rack Hardware Kit |
The RMH-100 is a bag of 100 10-32 x 3/4" black screws with non-isolating nylon washers to mount and protect equipment.
|
|
RS-1 |
Rack Shelf - 1 Rack Space |
RS-1 an 11" deep, single space unit that can support up to 35lbs.
|
|
RS-2 |
Rack Shelf - 2 Rack Space |
RS-2 a two-space shelf, 14 3/4" deep, that can support up to 50lbs.
|
|
RS-U |
Rack Shelf with Universal Punch Patterns |
RS-U a 10" deep single space with universal punch patterns.
|
|
SAT-1 |
Headphone Satellite Box |
This compact, rugged box lets listeners and performers adjust their own headphone volume.
|
|
SB |
Multi-channel Passive Mic Splitter |
SB Series multichannel microphone splitters provide a convenient method of splitting multiple microphone signals to two locations.
|
|
SB Series |
Multichannel Passive Mic Splitters |
Whirlwind SB Series multichannel microphone splitters provide a convenient method of splitting multiple microphone signals to two locations.
|
|
SBNL14442 |
1 NL4, 4 NL4 Wired 2-pole, NL Splitter / Breakout |
This SBNL series of boxes provide for a convenient way to split or breakout NL Speakons® for multiple speaker cabinet hookups.
|
|
SBNL14444 |
1 NL4, 4 NL4, Parallel-wired NL Splitter / Breakout |
This SBNL series of boxes provide for a convenient way to split or breakout NL Speakons® for multiple speaker cabinet hookups.
|
|
SBNL18442 |
1 NL8, 4 NL4 Wired 2-pole NL Splitter / Breakout |
This SBNL series of boxes provide for a convenient way to split or breakout NL Speakons® for multiple speaker cabinet hookups.
|
|
SBNL18444 |
1 NL8, 4 NL4 Wired 4-pole, NL Splitter / Breakout |
This SBNL series of boxes provide for a convenient way to split or breakout NL Speakons® for multiple speaker cabinet hookups.
|
|
SC Dual |
SC Dual Connector |
SC dual connectors terminated to any size you need. Give us a call to quote your next Fiber Optic cable.
|
|
SC Series Testers |
Multiline Speaker Cable Tester |
The SC Series Testers provide rapid, positive testing for multiline speaker cables.
|
|
SC48RJ |
NL4 / NL8 / RJ45 / XLR Tester |
The SC48RJ Tester provides rapid, positive testing for NL4 and NL8 type multiline speaker cables, RJ45 type data cables and XLR cables.
|
|
Selector |
Instrument Switch |
This box gives the ultimate control over your instruments and your gear.
|
|
SELECTORXL |
Programmable Footswitch Device |
The SelectorXL is a programmable footswitch device that provides two signal paths for a microphone with independent muting of each path.
|
|
SNAKESKIN® |
Braided Monofilament |
Braided monofilament provides an extra layer of protection for your cables. Also keeps fanouts tangle-free.
|
|
SNK164XL100 |
16 Input Connect Series Snake |
We designed our new Connect Series snakes with many of the same features found in our world famous Medusa® Standard snakes.
|
|
SNK244XL100 |
24 Input Connect Series Snake |
We designed our new Connect Series snakes with many of the same features found in our world famous Medusa® Standard snakes.
|
|
SNK84XL100 |
8 Input Connect Series Snake |
We designed our new Connect Series snakes with many of the same features found in our world famous Medusa® Standard snakes.
|
|
SoundChecks |
SoundChecks - Impressive Noice Reduction Rating (NRR) of 26dB |
Whirlwind SoundChecks have been awarded an impressive noice reduction rating (NRR) of 26dB.
|
|
SP1X2 |
Mic Splitter - One Direct and One Isolated Output |
The SP1X2 provide one direct and one transformer isolated outputs from a mic level input.
|
|
SP1X3 |
Mic Splitter - One Direct and Two Isolated Outputs |
The SP1X3 provide one direct and two transformer isolated outputs from a mic level input.
|
|
SP1X3LL |
1x3 Line Level Splitter |
The SP1X3LL provides one direct and two transformer isolated outputs from a line level input.
|
|
SPC82 |
Passive Microphone Splitter - 1 Direct and 1 Isolated Output |
The Whirlwind SPC8x series of passive microphone splitters are the ideal, expandable solution for permanent installations.
|
|
SPC83 |
Passive Microphone Splitter - 1 Direct and 2 Isolated Outputs |
The Whirlwind SPC8x series of passive microphone splitters are the ideal, expandable solution for permanent installations.
|
|
SPLIT 6 |
Line Level Parallel Splitter |
Use the SPLIT 6 handy box when you need to split a line level signal up to 6 times.
|
|
SPLITTER-L |
Premium Mic Splitter with Lundahl Transformer |
The SPLITTER-L utilizes the Lundahl LL1581XL mic transformer - the same transformer used in our very best Custom Shop Super Concert splitters.
|
|
SPX19-(length) |
Socapex 19 Pin Male to Socapex 19 Pin Female Cable, 12 AWG |
The SPX19 is a 12 AWG Socapex 19 Pin Male to Socapex 19 Pin Female Cable.
|
|
SPX19CF |
19-pin Chassis Female Socket with Locking Threads |
The Socapex 19 pin standard connectors in the original SPX19 with metal housing. Solder-style goldplated contacts are rated at 23 Amps and accept 12 or 14 Gauge wire.
|
|
SPX19CM |
19-pin Chassis Male Plug with Locking Ring |
The Socapex 19 pin standard connectors in the original SPX19 with metal housing. Solder-style goldplated contacts are rated at 23 Amps and accept 12 or 14 Gauge wire.
|
|
SPX19IF |
19-pin Inline Female Socket with Locking Threads and Backshell |
The Socapex 19 pin standard connectors in the original SPX19 with metal housing. Solder-style goldplated contacts are rated at 23 Amps and accept 12 or 14 Gauge wire.
|
|
SPX19IM |
19-pin Inline Male Plug with Locking Ring and Backshell |
The Socapex 19 pin standard connectors in the original SPX19 with metal housing. Solder-style goldplated contacts are rated at 23 Amps and accept 12 or 14 Gauge wire.
|
|
SR-1 |
Strain Relief Grip, 0.97 Inch Cable OD |
The SR-1 is a heavy-duty, 3 piece wire mesh grips and strain reliefs for mounting multipair cable to a steel box.
|
|
SR-1/2 |
Strain Relief Grip, 0.54 Inch Cable OD |
The SR-1/2 is a heavy-duty, 3 piece wire mesh grips and strain reliefs for mounting multipair cable to a steel box
|
|
SR-3/4 |
Strain Relief Grip, 0.73 Inch Cable OD |
The SR-3/4 is a heavy-duty, 3 piece wire mesh grips and strain reliefs for mounting multipair cable to a steel box
|
|
ST Dual |
ST Dual Connector |
ST Dual connectors terminated to any size you need. Give us a call to quote your next Fiber Optic cable.
|
|
Stage Boxes (Bulk) |
Unpunched/Punched Black Stage Boxes |
These heavy-gauge, cold-rolled steel boxes feature a textured, black, powder-coat finish. They are the same boxes we use for our Medusa Snake systems.
|
|
Stagebox/Rack Panel |
Stagebox and Rack Panel |
These enclosures which can take the form of an EIA 19" rack panel or a free standing, fully enclosed steel box. Rack panels are .090" thick aluminum with a black anodized finish.
|
|
STF |
Adapter Cable - Female XLR |
1/4" TRS wired to a female XLR. The tip is wired to pin 2.
|
|
STM |
Adapter Cable - Male XLR |
1/4" TRS wired to a male XLR. The tip is wired to pin 2.
|
|
STND-SSBD |
44 to 90.6 inch Connect Series Studio Stands |
The newest addition to our Connect Series line of pro-grade stands, with our Studio line featuring the STND-SSBD stand with collapsible tripod dolly.
|
|
STNDGC |
A-Frame Guitar Stand |
An affordable a-frame guitar stand featuring a compact, lightweight design. Matte black finish.
|
|
STNDMD |
Desktop Microphone Stand |
5" round base, desktop, 7" high, black.
|
|
STNDMI |
Desktop Microphone Stand - Adjustable |
7" round base, desktop, 15" - 24" adj. height, black.
|
|
STNDMR |
Microphone Stand with Twist Adjustable |
Round base, 36" - 60" adj. height w/ twist adjust, black.
|
|
STNDMSB |
Microphone Stand - Tripod Base |
Tripod base, 16" - 26" adj. height, 24" - 40" boom, black.
|
|
STNDMT |
Microphone Stand |
Tripod base, 36" - 60" adj. height, black.
|
|
STNDMTB |
Microphone Stand - Tripod Base |
Tripod base, 36" - 60" adj. height, 24" - 40" boom, black.
|
|
STNDMTQ |
Microphone Stand - with Quick Adjust Grip |
10" round base, 36" - 60" adj. height w/ quick adjust grip, black.
|
|
STNDSA |
Speaker Stand - Aluminum |
Aluminum Speaker Stands, Black.
|
|
STNDSS |
Speaker Stand - Steel |
Includes a speaker mount accessory plate for mounting speakers that do not have integral stand cups.
|
|
Super Tour System |
Super Tour System |
A custom designed heavy duty road case filled with the most popular touring features.
|
|
Super Tour with Amphenol cable |
Super Tour with Amphenol connectors |
The Whirlwind Super Tour with Amphenol connectors is an entire 48 x 12-ch Concert Series snake system, neatly packed into a single road case.
|
|
TESTER |
Cable Tester |
This cable tester tests most cable combinations of XLR, 1/4" or RCA Phono plugs for shorts, opens, and polarity reverse.
|
|
TRHL Series |
20kohm Transformer |
The TRHL series is designed to convert high impedance signals to low impedance.
|
|
TRHLM |
20kohm Transformer with Metal Can |
The TRHL series is designed to convert high impedance signals to low impedance.
|
|
TRSP1F |
150 ohm Transformer |
The TRSP1F facilitate microphone isolation and splitting.
|
|
TRSP2F |
150x2 Transformer |
The TRSP2F facilitate microphone isolation and splitting.
|
|
TRSP600L |
600 ohm Transformer |
The TRSP600L is designed for isolating, balancing and splitting line level audio signals.
|
|
W0C2MM |
2 Strand Multi Mode Fiber Optic Tactical Cable |
The Fiber Optic cables are wired using tactical Fiber Optic cable, used in military, industrial or any other application that demands the highest quality fiber optic cable with unsurpassed durability.
|
|
W0C2SM |
2 Strand Single Mode Fiber Optic Tactical Cable |
The Fiber Optic cables are wired using tactical Fiber Optic cable, used in military, industrial or any other application that demands the highest quality fiber optic cable with unsurpassed durability.
|
|
W0C4MM |
4 Strand Multi Mode Fiber Optic Tactical Cable |
The Fiber Optic cables are wired using tactical Fiber Optic cable, used in military, industrial or any other application that demands the highest quality fiber optic cable with unsurpassed durability.
|
|
W0C4SM |
4 Strand Single Mode Fiber Optic Tactical Cable |
The Fiber Optic cables are wired using tactical Fiber Optic cable, used in military, industrial or any other application that demands the highest quality fiber optic cable with unsurpassed durability.
|
|
W2/FC |
Rubber Jacket Bulk Feeder Entertainment Cable, 175 AMP |
Bulk feeder entertainment cable is available in a variety of sizes and lengths.
|
|
W2OFC |
Rubber Jacket Bulk Feeder Entertainment Cable, 300 AMP |
Bulk feeder entertainment cable is available in a variety of sizes and lengths.
|
|
W4/OFC |
Rubber Jacket Bulk Feeder Entertainment Cable, 400 AMP |
Bulk feeder entertainment cable is available in a variety of sizes and lengths.
|
|
Wall Mounting Plates |
Wall Mounting Plates for Standard Electrical Junction Boxes |
Whirlwind Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes.
|
|
WB1B |
Wall Box with Cover, Black |
The WB1B wall boxes have removable side and bottom panels for connector mounting.
|
|
WB1BB |
Wall Blackbox with Cover, Gray Enamel |
The WB1BB backbox is a NEMA Type 1 electrical enclosure, gray enamel with knockouts and dimensions of 9” high x 14.38” wide x 3.70”deep.
|
|
WB1P |
Wall Box with Cover, Gray Primer |
The WB1P wall boxes have removable side and bottom panels for connector mounting.
|
|
WD-7C |
Broadcast Cable Reel / Snake Combo with Lockable Heavy Duty Casters |
Broadcast Cable Reel / Snake Combo with Lockable Heavy Duty Casters have built in connector plates on their sides that can be punched and wired to your custom specifications.
|
|
WD1 |
10lbs Cable Reel |
WD1 is ideal for storage of microphone and small diameter multipair cable.
|
|
WD1X |
Microphone and Small Diameter Multipair Cable Reel, Gray |
Ideal for storage of microphone and small diameter multipair cable. Integral handles make them easy to carry and store.
|
|
WD2 |
16lbs Cable Reel |
WD2 is ideal for storage of microphone and small diameter multipair cable.
|
|
WD2-D |
Microphone Multipair Cable Reel, Gray |
Ideal for storage of microphone as well as multipair cable. Integral handles make them easy to carry and store.
|
|
WD2X |
Microphone Multipair Cable Reel with Integrated Handles, Gray |
Ideal for storage of microphone and small diameter multipair cable. Integral handles make them easy to carry and store.
|
|
WD3 |
40lbs Large Capacity Cable Reel |
Large capacity reels that feature removable crank handles and pillow-block bearings for smooth cranking under heavy loads.
|
|
WD3S |
40lbs Cable Reel |
Large capacity reels that feature removable crank handles and pillow-block bearings for smooth cranking under heavy loads.
|
|
WD4 |
42lbs Cable Reels |
These super-large capacity reels have removable crank handles.
|
|
WD4D |
Super-large Capacity Cable Reel with Split Reel Design |
Super-large capacity reels have removable crank handles. Feature pillow-block bearings and offers split reel design.
|
|
WD5 |
15lbs Cable Reel |
Designed for applications with a fanout at the reel end, the WD5 incorporates a split reel for the fanout section and pigbag.
|
|
WD6 |
12lbs Cable Reel |
Compact, stackable reels available in two sizes locking casters are available on the WD7C.
|
|
WD7 |
19lbs Cable Reel |
Compact, stackable reels available in two sizes.
|
|
WD7C |
Stackable Compact Cable Reel with Locking Casters |
These reels feature a built-in connector panel which can be be punched, loaded and/or wired with the connectors and cable of your choice for an additional charge.
|
|
WD8C |
Cable Reel |
This imported reel is built to our demanding specifications.
|
|
WFF12x12x1B |
13x13x1-inch Flush Mount Wall Frame |
The flush mount version (WFF series) mounts "in the wall" and its mounting flanges extend one-half inch beyond the edge of the back box on all four sides to provide a visually appealing trim ring effect to the finished wall.
|
|
WFF12x12x2.5B |
13x13x2.5-inch Flush Mount Wall Frame |
The flush mount version (WFF series) mounts "in the wall" and its mounting flanges extend one-half inch beyond the edge of the back box on all four sides to provide a visually appealing trim ring effect to the finished wall.
|
|
WFF8x8x1B |
9x9x1-inch Flush Mount Wall Frame |
The flush mount version (WFF series) mounts "in the wall" and its mounting flanges extend one-half inch beyond the edge of the back box on all four sides to provide a visually appealing trim ring effect to the finished wall.
|
|
WFF8x8x2.5B |
9x9x2.5-inch Flush Mount Wall Frame |
The flush mount version (WFF series) mounts "in the wall" and its mounting flanges extend one-half inch beyond the edge of the back box on all four sides to provide a visually appealing trim ring effect to the finished wall.
|
|
WFI12X12B |
10.5x10.5-inch Connector mounting Insert Panel |
Connector mounting insert panels attach to the frames and can be custom punched, engraved and loaded to accommodate any installation requirement.
|
|
WFI8X8B |
6.5x6.5-inch Connector mounting Insert Panel |
Connector mounting insert panels attach to the frames and can be custom punched, engraved and loaded to accommodate any installation requirement.
|
|
WFS12x12x1B |
12x12x1-inch Surface Mount Wall Frame |
The surface mount version (WFS series) mounts "on the wall" and its mounting flanges are the same dimensions as the corresponding backbox.
|
|
WFS12x12x2.5B |
12x12x2.5-inch Surface Mount Wall Frame |
The surface mount version (WFS series) mounts "on the wall" and its mounting flanges are the same dimensions as the corresponding backbox.
|
|
WFS8x8x1B |
8x8x1-inch Surface Mount Wall Frame |
The surface mount version (WFS series) mounts "on the wall" and its mounting flanges are the same dimensions as the corresponding backbox.
|
|
WFS8x8x2.5B |
8x8x2.5-inch Surface Mount Wall Frame |
The surface mount version (WFS series) mounts "on the wall" and its mounting flanges are the same dimensions as the corresponding backbox.
|
|
WLF482 |
48-point Longframe Bay |
Longframe jacks feature nickel plated sleeves and solder connections for tip, ring, shield, tip normal and ring normal.
|
|
WP1/0 |
Single Gang Stainless Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1 |
Single Gang Stainless Steel Wall Mounting Plate - Punched for 1 Whirlwind XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1FNS |
Single Gang Stainless Steel Wall Mounting Plate - 1 Neutrik Female XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1FW |
Single Gang Stainless Steel Wall Mounting Plate - 1 Whirlwind WC3F Female XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1MNS |
Single Gang Stainless Steel Wall Mounting Plate - 1 Neutrik Male XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1MW |
Single Gang Stainless Steel Wall Mounting Plate - 1 Whirlwind WC3M Male XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1ND |
Single Gang Stainless Steel Wall Mounting Plate - Punched for 1 Neutrik D XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1NL4 |
Single Gang Stainless Steel Wall Mounting Plate - 1 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/1QW |
Single Gang Stainless Steel Wall Mounting Plate - 1 Whirlwind WCQF 1/4-in Jack |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2 |
Single Gang Stainless Steel Wall Mounting Plate - Punched for 2 Whirlwind XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2FNS |
Single Gang Stainless Steel Wall Mounting Plate - 2 Neutrik Female XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2FW |
Single Gang Stainless Steel Wall Mounting Plate - 2 Whirlwind WC3F Female XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2MNS |
Single Gang Stainless Steel Wall Mounting Plate - 2 Neutrik Male XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2MW |
Single Gang Stainless Steel Wall Mounting Plate - 2 Whirlwind WC3M Male XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2ND |
Single Gang Stainless Steel Wall Mounting Plate - Punched for 2 Neutrik D XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2NL4 |
Single Gang Stainless Steel Wall Mounting Plate - 2 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1/2QW |
Single Gang Stainless Steel Wall Mounting Plate - 2 Whirlwind WCQF 1/4-in Jacks |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/0 |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1 |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 1 Whirlwind XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1FNS |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Neutrik Female XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1FW |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Whirlwind WC3F Female XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1MNS |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Neutrik Male XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1MW |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Whirlwind WC3M Male XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1ND |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 1 Neutrik D XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1NL4 |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/1QW |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Whirlwind WCQF 1/4-in Jack |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2 |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 2 Whirlwind XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2FNS |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Neutrik Female XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2FW |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Whirlwind WC3F Female XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2MNS |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Neutrik Male XLR, Screw Term |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2MW |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Whirlwind WC3M Male XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2ND |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 2 Neutrik D XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2NL4 |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1B/2QW |
Single Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Whirlwind WCQF 1/4-in Jacks |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1BS/0 |
Single Gang Satin Brass Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP1WH/0 |
Single Gang White on Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WP2/0 |
2 Gang Stainless Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/1 |
2 Gang Stainless Steel Wall Mounting Plate - Punched for 1 Whirlwind XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/1FW |
2 Gang Stainless Steel Wall Mounting Plate - 1 Whirlwind WC3F Female XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/1MW |
2 Gang Stainless Steel Wall Mounting Plate - 1 Whirlwind WC3M Male XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/1ND |
2 Gang Stainless Steel Wall Mounting Plate - Punched for 1 Neutrik D XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/1NL4 |
2 Gang Stainless Steel Wall Mounting Plate - 1 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/1QW |
2 Gang Stainless Steel Wall Mounting Plate - 1 Whirlwind WCQF 1/4-in Jack |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/2 |
2 Gang Stainless Steel Wall Mounting Plate - Punched for 2 Whirlwind XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/2FW |
2 Gang Stainless Steel Wall Mounting Plate - 2 Whirlwind WC3F Female XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/2MW |
2 Gang Stainless Steel Wall Mounting Plate - 2 Whirlwind WC3M Male XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/2ND |
2 Gang Stainless Steel Wall Mounting Plate - Punched for 2 Neutrik D XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/2NL4 |
2 Gang Stainless Steel Wall Mounting Plate - 2 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/2QW |
2 Gang Stainless Steel Wall Mounting Plate - 2 Whirlwind WCQF 1/4-in Jacks |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/4 |
2 Gang Stainless Steel Wall Mounting Plate - Punched for 4 Whirlwind XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/4FW |
2 Gang Stainless Steel Wall Mounting Plate - 4 Whirlwind WC3F Female XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/4MW |
2 Gang Stainless Steel Wall Mounting Plate - 4 Whirlwind WC3M Male XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/4ND |
2 Gang Stainless Steel Wall Mounting Plate - Punched for 4 Neutrik D XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/4NL4 |
2 Gang Stainless Steel Wall Mounting Plate - 4 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2/4QW |
2 Gang Stainless Steel Wall Mounting Plate - 4 Whirlwind WCQF 1/4-in Jacks |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/0 |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/1 |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 1 Whirlwind XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/1FW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Whirlwind WC3F Female XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/1MW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Whirlwind WC3M Male XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/1ND |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 1 Neutrik D XLR |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/1NL4 |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/1QW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 1 Whirlwind WCQF 1/4-in Jack |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/2 |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 2 Whirlwind XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/2FW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Whirlwind WC3F Female XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/2MW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Whirlwind WC3M Male XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/2ND |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 2 Neutrik D XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/2NL4 |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/2QW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 2 Whirlwind WCQF 1/4-in Jacks |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/4 |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 4 Whirlwind XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/4FW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 4 Whirlwind WC3F Female XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/4MW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 4 Whirlwind WC3M Male XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/4ND |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - Punched for 4 Neutrik D XLRs |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/4NL4 |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 4 Neutrik NL4 |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2B/4QW |
2 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate - 4 Whirlwind WCQF 1/4-in Jacks |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2BS/0 |
2 Gang Satin Brass Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP2WH/0 |
2 Gang White on Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WP3/0 |
3 Gang Stainless Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP3B/0 |
3 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP3BS/0 |
3 Gang Satin Brass Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP3WH/0 |
3 Gang White on Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP4/0 |
4 Gang Stainless Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP4B/0 |
4 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP4WH/0 |
4 Gang White on Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP5/0 |
5 Gang Stainless Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP5B/0 |
5 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP6/0 |
6 Gang Stainless Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP6B/0 |
6 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP7/0 |
7 Gang Stainless Steel Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WP7B/0 |
7 Gang 0.04-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPID |
Wall Plate Insert - Fits Decora |
They mount easily in standard wall plates (shown), behind panels, or in floor boxes.
|
|
WPIE |
Wall Plate Insert - Fits Edison |
They mount easily in standard wall plates (shown), behind panels, or in floor boxes.
|
|
WPX1/0 |
Single Gang 0.125-in Clear Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WPX1B/0 |
Single Gang 0.125-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in single gang (4-1/2" x 2-3/4").
|
|
WPX2/0 |
2 Gang 0.125-in Clear Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WPX2B/0 |
2 Gang 0.125-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available double gang (4 1/2"x 4-1/2").
|
|
WPX3/0 |
3 Gang 0.125-in Clear Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX3B/0 |
3 Gang 0.125-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX4/0 |
4 Gang 0.125-in Clear Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX4B/0 |
4 Gang 0.125-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX5/0 |
5 Gang 0.125-in Clear Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX5B/0 |
5 Gang 0.125-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX6/0 |
6 Gang 0.125-in Clear Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX6B/0 |
6 Gang 0.125-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX7/0 |
7 Gang 0.125-in Clear Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WPX7B/0 |
7 Gang 0.125-in Black Anodized Aluminum Wall Mounting Plate |
Wall Mounting Plates are cover plates designed to fit standard electrical junction boxes. They are available in blank plates up to 7 gang.
|
|
WT1000 |
433 to 447 Pitch Adjustable Tuner |
The Whirlwind WT1000 is an economical and feature packed device.
|
|
WTT961 |
Unwired Patch Bay |
Professional quality 96 point Bantam bay.
|
|
XCHECKER |
Portable Cable Checker |
The Whirlwind Xchecker is a portable cable checker for testing common balanced audio lines. The testing unit has a female XLR and the terminator is a male XLR, for direct connection to XLR wiring.
|
