This AV-iQ resource is provided free for internal use only.
Advanced Presentation Products Inc.
450 Matheson Blvd East
Unit 59
Mississauga, ON L4Z 1R5
Canada
(905)502-1110
Home : AV Equipment : Control Systems
Narrow Results
Keyword
Sub Categories
Sponsor Manufacturers (9)
Sort By:
Default
New Products
Featured
Company A - Z
Company Z - A
Model A - Z
Model Z - A
Items Per Page: 20
10
20
30
40
50
Displaying page 1 of 11 - (210 total products)
First
Prev
1
2
3
4
5
Next
Last
Control Systems
Kramer Electronics USA, Inc. - FC-132ETH  
New
Kramer Electronics USA, Inc.
The FC-132ETH is an advanced converter for RS-232 serial control signals to and from the Ethernet. It has 33 RS-232 ports (one of them can be used as RS-485) to which serial data can be injected from eight RS-232 ports or from configured ETH connection.
Model: FC-132ETH
Add
Compare
Save to Project
Crestron Electronics, Inc. - DMPS3-300-C  
New
Crestron Electronics, Inc.
Provides a complete presentation control and signal routing solution for boardrooms and classrooms.
Model: DMPS3-300-C
Add
Compare
Save to Project
Kramer Electronics USA, Inc. - RB-6  
New
Kramer Electronics USA, Inc.
The RB-6 is a high-performance power supply that distributes power to up to six external units. Four power outlets have on/off push-button control and two power outlets have on/off switching as well as full voltage control.
Model: RB-6
Add
Compare
Save to Project
Crestron Electronics, Inc. - DMPS3-200-C  
New
Crestron Electronics, Inc.
Provides a complete presentation control and signal routing solution for boardrooms and classrooms.
Model: DMPS3-200-C
Add
Compare
Save to Project
SP Controls, Inc. - PXE-DCM+  
Featured
SP Controls, Inc.
The new PixiePlus Device Control Module has all the features of the popular PIXIE controller plus more. In addition to IR control, the PixiePlus supports RS-232 commands.
Model: PXE-DCM+
Add
Compare
Save to Project
SP Controls, Inc. - PX2-MP-IR  
Featured
SP Controls, Inc.
The PixiePro (PX2-MP-IR) is a modular, infrared-learning audiovisual control system. It ships ready to surface-mount, or fits in a four-gang backbox.
Model: PX2-MP-IR
Add
Compare
Save to Project
SP Controls, Inc. - PX2-NRC-1142  
Featured
SP Controls, Inc.
The PixiePro NRC-1142 Networked Room Controller is a low-profile, low-cost, programming-free control system that can be configured, controlled, and monitored via a friendly Web interface.
Model: PX2-NRC-1142
Add
Compare
Save to Project
Crestron Electronics, Inc. - AV2  
Crestron Electronics, Inc.
Crestron 2-Series Control Systems are the brain of a complete integrated AV or automation solution. Every audio, video, and environmental element becomes integrated and accessible through the control system.
Model: AV2
Add
Compare
Save to Project
Crestron Electronics, Inc. - AV3  
Crestron Electronics, Inc.
A rack-mountable 3-Series control processor offering immense power, expanded memory, numerous integrated control ports and optional control card expansion slots.
Model: AV3
Add
Compare
Save to Project
Crestron Electronics, Inc. - B-G1-WPK  
Crestron Electronics, Inc.
B-G1-WPK covers are great for protecting CNX-B Designer Series Keypads wherever they may be exposed to moisture or dampness such as basements, pools, boathouses, bathrooms, laundries and garages.
Model: B-G1-WPK
Add
Compare
Save to Project
Crestron Electronics, Inc. - BPC-HPLIR  
Crestron Electronics, Inc.
BPC-HPLIR is a handheld tool designed for use with the Crestron onCue BPC-8 basic presentation controller, providing a simple means to learn IR commands from third-party remotes and upload configuration files created using the onCue software tool.
Model: BPC-HPLIR
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2COM-2  
Crestron Electronics, Inc.
The C2COM-2 is a 2 COM port control card installs in any Y-Bus expansion slot of a 2-series control system to provide two bidirectional RS-232/422/485 ports with hardware handshaking.
Model: C2COM-2
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2COM-3  
Crestron Electronics, Inc.
The C2COM-3 is a 3 COM port control card installs in any Y-Bus expansion slot of a 2-series control system to provide three bidirectional RS-232/422/485 ports with hardware handshaking.
Model: C2COM-3
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2ENET-1  
Crestron Electronics, Inc.
The C2ENET-1 is a 10/100BaseT half/full duplex Ethernet card that installs in any Z-bus expansion slot of a 2-series control system.
Model: C2ENET-1
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2ENET-2  
Crestron Electronics, Inc.
The C2ENET-2 is a dual-port Ethernet card with the same features and functionality as C2ENET-1, plus C2ENET-2 enables control system's built-in firewall, router and network address translator (NAT).
Model: C2ENET-2
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2N-HBLOCK  
Crestron Electronics, Inc.
C2N-HBLOCK is a parallel distribution block for termination of multiple Cresnet cables. Three different types of connectors are provided to accommodate all types of Cresnet wiring.
Model: C2N-HBLOCK
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2N-IO  
Crestron Electronics, Inc.
The C2N-IO is a very compact device that adds control ports to any Crestron 2-Series or 3-Series control system. It connects via the Cresnet control network and provides one RS-232, one IR, and two relay control ports.
Model: C2N-IO
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2N-NPA8  
Crestron Electronics, Inc.
Cresnet network poll accelerator works with a 2-Series control system to maintain a high level of performance and reliability for systems having a large number of devices.
Model: C2N-NPA8
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2N-SDC  
Crestron Electronics, Inc.
The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens.
Model: C2N-SDC
Add
Compare
Save to Project
Crestron Electronics, Inc. - C2N-SDC-DC  
Crestron Electronics, Inc.
The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes.
Model: C2N-SDC-DC
Add
Compare
Save to Project
You must be logged in to use the filters.
Register today!
With a free My-iQ account, you'll be able to keep track of the latest updates, event notifications and promotions from your favorite AV manufacturers, manage your own projects and discover new pro-AV products.
register now
AV-iQ Copyright 2014 - Terms and Conditions