Type 85 direct box adds nothing and removes nothing from the instrument’s signal. No distortion. No electronic hum or buzz. No loss of dynamic range.
- Transparent signal to the mix board with no added noise or distortion
- Isolates ground buzz between console and amp
- Low profile, compact form factor
- Almost invisible on stage• Single-piece extruded case with extra-thick walls
- Internal electronics are molded in a solid epoxy block and fully protected against electrical damage
- Input circuit withstands 220V AC, and static spikes up to 20,000 volts
-
Product Weight :
1.16 lbs
-
Product Weight :
0.52 kg
-
Frequency Response :
20Hz to 20kHz (+/- 1dB)
-
Noise :
63 ?VRMS (-122dBu) BW = 20kHz
-
Power Requirements :
9V battery or .4mA @ 48V Phantom
-
Input Protection :
220 VRMS and 20,000V static discharges
-
Voltage Gain :
-10dB in Pickup mode, -46dB in Speaker mode
-
RF Filtering :
250kHz Low Pass on input, 30kHz Low Pass on output
-
Distortion :
.018% THD @ 1kHz and 1 V P-P in, .08% IMD 10kHz/60Hz 1 V P-P in
-
Input Resistance :
10 Megaohms (in Pickup mode)
-
Input Capacitance :
160 picofarad, equal to two feet of low-capacitance guitar cable
-
Dimensions :
1.75 x 3 x 5 in (45mm x 77mm x 127mm)
Related Products
-
WCB6
Omnidirectional Micro-Lavalier Microphone
-
WCB6B
Countryman Omnidirectional Micro-Lavalier Microphone, Black, TA4F Connector
-
WCB6T
Countryman Omnidirectional Micro-Lavalier Microphone, Cocoa, TA4F Connector
-
WCE6
Omnidirectional Earset Microphone with TA4F Connector
-
WCE6i
Countryman Omnidirectional Earset Microphone with 20Hz to 20kHz Frequency Response
-
WCE6iB
Countryman Omnidirectional Earset Microphone, Flexible boom, Black, TA4F Connector
-
WCE6iLT
Countryman Omnidirectional Earset Microphone, Flexible Boom, Light Tan, TA4F Connector
-
WCE6iT
Countryman Omnidirectional Earset Microphone, Flexible Boom, Tan, TA4F Connector
