The GLXP-HSW12 is a Crestron® Green Light® switching module which features 12 channels of high-inrush power switching with rugged, high-current latching relays. The module is part of a complete Crestron engineered GLPS Green Light switching panel.
- 12 channels of high-inrush power switching
- Rugged, high-current latching relays
- Supports 100 to 277 Volt applications
- 16 Amp, 1 HP load rating per channel
- Arc-less switching
- Positive air gap at each output
- Phase-independent channels
- Cresnet® communications
- Redundant power capability—module powered via line or Cresnet
- Local controls for testing and verification
- Local and remote override capability
- Non-volatile power failure memory
- GLEP cabinet installation
-
Operating Temperature (Maximum) :
40 C
-
Operating Temperature (Maximum) :
104 F
-
Operating Temperature (Minimum) :
0 C
-
Operating Temperature (Minimum) :
32 F
-
AC Voltage :
277 Volts
-
Active Power :
5 Watt
-
Current Draw :
16 Amps
-
DC Voltage :
24 Volts
-
Depth :
4.78 in
-
Depth :
121.41 mm
-
Height :
11.07 in
-
Height :
281.18 mm
-
Width :
9.50 in
-
Width :
241.30 mm
-
Switch Channels :
12
-
Per Channel :
16 Amps @ 100 to 277 Volts AC, 50/60 Hz; 0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts
-
Switch Load Types :
Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent Ballast, High-Intensity Discharge, LED, Motor
-
Relay Lifetime :
1,000,000 on/off operations at full electronic ballast load
-
Primary :
100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
-
Humidity :
10% to 90% RH (non-condensing)
-
Heat Dissipation :
160 BTU/hr
-
Depth (-LP only) :
3.07 inch