|
|
|
Atlas Sound
Model I128SYS from Atlas Sound consists of a factory assembled loudspeaker, baffle, tile support, enclosure system with PCB amp/control board securely mounted to the rear of the speaker via concealed weld studs.
Model: I128SYS
|
|
|
|
|
Atlas Sound
Model I8S from Atlas Sound consists of a factory assembled loudspeaker/ baffle with PCB amp/control board securely mounted to the rear of the baffle via concealed weld studs.
Model: I8S
|
|
|
|
|
Atlas Sound
Model I8SC from Atlas Sound consists of a factory assembled loudspeaker/ baffle/digital clock with PCB amp/control board securely mounted to the rear of the baffle via concealed weld studs.
Model: I8SC
|
|
|
|
|
Atlas Sound
Model I8SCH from Atlas Sound consists of a factory assembled loudspeaker/ baffle/digital clock with PCB amp/control board securely mounted to the rear of the baffle via concealed weld studs.
Model: I8SCH
|
|
|
|
|
Lowell Manufacturing Company
Attenuator-100W, 70V/25V, 1-gang Stainless Steel
Model: 100LVC
|
|
|
|
|
|
Lowell Manufacturing Company
Attenuator-25W, 70V/25V, 1-gang Stainless Steel
Model: 25LVC
|
|
|
|
|
|
Lowell Manufacturing Company
Attenuator-50W, 70V/25V, 1-gang Stainless Steel
Model: 50LVC
|
|
|
|
|
Lowell Manufacturing Company
Switch-Intercom Call Station-Momentary SPST-Pushbutton, 1-gang
Model: CS10
|
|
|
|
|
Lowell Manufacturing Company
Attenuator-1500 ohm Potentiometer, 1-gang Stainless Steel
Model: LPD-1500S
|
|
|
|
|
Lowell Manufacturing Company
Attenuator-50 ohm Potentiometer, 1-gang Stainless Steel
Model: LV-50S
|
|
|
|
|
|
Lowell Manufacturing Company
Attenuator-5K ohm Potentiometer, 1-gang Stainless Steel
Model: LV-5K
|
|
|
|
|
RDL, Radio Design Labs
The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required.
Model: ST-VP1
|
|
|
|
|
RDL, Radio Design Labs
The TX-PCR1 is the ideal choice in many applications where switching needs to be controlled from a constant-voltage amplified audio source. The module will trigger on any program material, with paging sources being the most common.
Model: TX-PCR1
|
|
|
|
|
RDL, Radio Design Labs
The TX-PSD1 is the ideal choice in many applications where switching needs to be controlled from a constant-voltage amplified audio source. The module will trigger on any program material, with paging sources being the most common.
Model: TX-PSD1
|
|
|
|
|
Bogen Communications, Inc.
The NR100 converts virtually any paging system into an after-hours night bell alert system. The NR100 night ringer sends an electronic tone through paging system speakers when triggered by the telephone system’s night bell circuit, thus eliminating the ne
Model: NR-100
|
|
|
|
|
Bogen Communications, Inc.
PCM2000 is a modular telephone zone paging and control system. By integrating unique, multi-function modules, the PCM2000 offers both incredible flexibility and capability for future expansion.
Model: PCM2000
|
|
|
|
|
Bogen Communications, Inc.
Pre-assembled and tested 3-zone PCM system with a PCMPS2 power supply that ia used for 1 to 3 zone applications or expand it with other PCM modules.
Model: PCMSYS3
|
|
|
|
|
Dynacord
This paging station employs gooseneck microphone and 6 function keys as well as a covered alarm key.
Model: DPC 4106
|
|
|
|
|
Dynacord
The DPC 8015 is a paging console for the PROMATRIX 8000 system. The paging console employs a permanently supervised gooseneck microphone with windscreen, a total of 20 buttons, a lighted LC-display and a integrated loudspeaker.
Model: DPC 8015 / 8120
|
|
|
|
|
Dynacord
The DPC 4010/10R and the DPC 4020/20R paging stations are "two in one" microphone terminals for the PROMATRIX system in a 19-inch enclosure.
Model: DPC4000/R
|
|
