| Model |
Product Name |
Description |
|
New RU-VCA6A |
RU-VCA6A
Digitally Controlled Attenuators |
The RU-VCA6A is a full-featured studio-quality dual-channel audio attenuator module for local and/or remote control of balanced or unbalanced line-level sources.
|
|
New RU-VCA2A |
Digitally Controlled Attenuators |
The RU-VCA2A is a full-featured studio-quality dual-channel audio attenuator module for local and/or remote control of balanced or unbalanced line-level sources.
|
|
RC-HPS1 |
RC-HPS1 RC-HPS1 Rack Mount for Desktop Power Supply and TX Module |
Mounts one desktop style power supply and one TX module. The RC-HPS1 is compatible with all RDL desktop power supplies and with any desktop power supply with maximum dimensions: 5.8", 14.7 cm x 3", 7.6 cm x 1.7", 4.3 cm This adapter fits 10.4" racks.
|
|
STR-H6A |
STR-H6A 10.4" Rack Mount for 6 STICK-ON Series Product |
STR-H6A 10.4" Rack Mount for 6 STICK-ON Series Product
|
|
FP-HRA |
FP-HRA Rack Mount for FLAT-PAK Series Products |
The FP-HRA rack mounts FLAT-PAK modules. This adapter fits 10.4" racks.
|
|
TX-HRA3 |
TX-HRA3 10.4" Rack Mount for 3 TX Series Products |
The TX-HRA3 rack mounts 3 TX modules. This adapter fits 10.4" racks.
|
|
RU-HRA1 |
RU-HRA1 10.4" Rack Mount for 1 RACK-UP Series Product |
The RU-HRA1 rack mounts 1 RACK-UP module or mounting frame for AMS accessories. This adapter fits 10.4" racks.
|
|
HR-HRA1 |
HR-HRA1 Rack adapter for HALF-RACK series - fits 10.4" racks |
HR-HRA1 Rack adapter for HALF-RACK series - fits 10.4" racks
|
|
EZ-HRA3 |
EZ-HRA3 Rack Adapter for 3 Increments of 1/6 Rack Width |
EZ-HRA3 Rack Adapter for 3 Increments of 1/6 Rack Width
|
|
HD-HRA1 |
HD-HRA1 Rack Adapter |
Mounts 1 HD series product. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel. This adapter fits 10.4" racks.
|
|
RC-HPS3 |
RC-HPS3 10.4" Rack Mount for 3 Desktop Power Supplies |
Mounts up to 3 desktop style power supplies. Wiring may be routed out the sides and rear of the chassis. The RC-HPS3 is compatible with all RDL desktop power supplies.
|
|
FP-TPS4A |
FP-TPS4A Format-A Two-Pair Audio Sender |
The FP-TPS4A is an RDL Format-A Audio Sender that accepts either a stereo line-level or 1 to 3 Watt mono amplified fixed-level signal, usually from a commercial hospitality equipped TV.
|
|
DB-TPA1A |
DB-TPA1A 3.5 W Audio Power Amplifier |
The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack.
|
|
DS-TPA1A |
DS-TPA1A 3.5 W Audio Power Amplifier |
The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack.
|
|
D-TPA1A |
D-TPA1A 3.5 W Audio Power Amplifier |
The -TPA1A modules are two pair audio amplifier modules compatible with RDL Format A twisted pair products. Each -TPA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack.
|
|
DB-RCX10R |
DB-RCX10R Remote Volume Control for RCX-5C |
DB-RCX10R Remote Volume Control for RCX-5C.
|
|
DB-RCX2 |
DB-RCX2 Room Control for RCX-5C Room Combiner |
DB-RCX2 Room Control for RCX-5C Room Combiner
|
|
TX-8A |
TX-8A 4 Ohm / 8 Ohm Input Interface |
The TX-8A is the ideal choice in many applications requiring superior quality transformer coupling between the output of a 4 or 8 Ohm power amplifier and the input of an audio mixer or amplifier.
|
|
TP-HA1A |
TP-HA1A Format-A Stereo Headphone Amplifier |
The TP-HA1A is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. Each TP-HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.
|
|
DS-RCX10R |
DS-RCX10R Remote Volume Control for RCX-5C |
DS-RCX10R Remote Volume Control for RCX-5C
|
|
DS-RCX1 |
Room Control for RCX-5C Room Combiner |
Room Control for RCX-5C Room Combiner.
|
|
D-RCX1 |
Room Control for RCX-5C Room Combiner |
Room Control for RCX-5C Room Combiner.
|
|
HR-MCP2 |
HR-MCP2 Dual Microphone Compressor |
The HR-MCP2 is a dual channel microphone compressor that produces a consistent audio output level over wide variations (up to 25 dB) in the microphone input level.
|
|
ACB-1 |
Jack Box - Stereo Headphone |
Jack Box - Stereo Headphone features all metal construction with single stereo headphone jack, ready for wiring through the nylon bushing opening.
|
|
ACB-2 |
Jack Box - Dual Phono Jacks |
Jack Box - Dual Phono Jacks features all metal construction with two unbalanced RCA jacks pre mounted and ready for wiring through the nylon bushing opening
|
|
ACM-3 |
Amplitude Component Monitor |
The ACM-3 is a test instrument which monitors the amplitude component present on frequency modulated carriers. The AM component is representative of bandwidth characteristics in the transmission system.
|
|
AF-SH1 |
AF-SH1 Stereo Headphone Amplifier - APPFLEX panel with user level control |
The AF-SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources.
|
|
AF-SH1Z |
AF-SH1Z Stereo Headphone Amplifier- APPFLEX panel with user level control |
The AF?SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The module mounts conveniently in a precut opening in a wood or metal enclosure or in various RDL mounting accessories.
|
|
AF-TPR1A |
Active Single-Pair Receiver - Twisted Pair Format-A - APPFLEX - XLR mic/line output |
The -TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
AF-TPR2A |
Active Two-Pair Receiver - Twisted Pair Format-A - APPFLEX - stereo phono jack outputs |
The -TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
AF-TPR3A |
Active Three-Pair Receiver - Twisted Pair Format-A - APPFLEX - XLR and stereo phono outputs |
The AF-TPR3A modules are three-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
AF-TPR3C |
Active Three-Pair Receivers - Twisted Pair Format-C - Composite video & stereo audio |
Active Three-Pair Receivers - Twisted Pair Format-C - Composite video & stereo audio
|
|
AF-TPS1A |
Active Single-Pair Sender - Twisted Pair Format-A - APPFLEX - XLR mic input w phantom |
The -TPS1A modules are single-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
AF-TPS2A |
Active Two-Pair Sender - Twisted Pair Format-A -APPFLEX - Stereo Phono Jack Inputs |
The AP-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
AF-TPS3A |
Active Three-Pair Sender - Twisted Pair Format-A - APPFLEX - XLR mic & stereo phono in |
The AF-TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
AF-TPS3C |
Active Three-Pair Senders |
The AF-TPS3C modules are three-pair audio/video sending modules compatible with RDL® Format-C twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio and video sources.
|
|
AFM-A1 |
Wall Mount Adapter Plate for APPFLEX Module - Ultrastyle |
The AFM-A1 is an ULTRASTYLE plate that adapts an APPFLEX module to an RDL WB-1U Universal Wall Mounting Box (or to a single-gang US electrical box).
|
|
AFM-A1N |
Wall Mount Adapter Plate for APPFLEX Module - Ultrastyle neutral |
The AFM-A1 is an ULTRASTYLE plate that adapts an APPFLEX module to an RDL WB-1U Universal Wall Mounting Box (or to a single-gang US electrical box).
|
|
AFM-DC1 |
Desktop Chassis for APPFLEX Module - Ultrastyle gray |
The AFM-DC1 mounts an APPFLEX product to a countertop or desk. The front panel is angled for comfortable operation of the APPFLEX module.
|
|
AFM-DC1N |
Desktop Chassis for APPFLEX Module - Ultrastyle neutral |
The AFM-DC1N mounts an APPFLEX product to a countertop or desk. The front panel is angled for comfortable operation of the APPFLEX module.
|
|
AFM-DC2 |
Desktop Chassis for 2 APPFLEX Modules - Ultrastyle gray |
The AFM-DC2 mounts two APPFLEX products to a countertop or desk. The front panel is angled for comfortable operation of the APPFLEX modules.
|
|
AFM-DC2N |
Desktop Chassis for 2 APPFLEX Modules - Ultrastyle neutral |
The AFM-DC2N mounts two APPFLEX products to a countertop or desk. The front panel is angled for comfortable operation of the APPFLEX modules.
|
|
AFM-FP1 |
APPFLEX Filler Plate - single - Ultrastyle gray |
APPFLEX Filler Plate - single - Ultrastyle gray
|
|
AFM-FP1N |
APPFLEX Filler Plate - single - Ultrastyle neutral |
APPFLEX Filler Plate - single - Ultrastyle neutral
|
|
AMS |
Accessory Mounting System |
AMS is an accessory mounting system for jacks, indicators, switches and controls. The AMS-UF1 Universal Frame mounts directly into any RACK-UP mounting bay.
|
|
AMS-1/4F |
1/4" Phone Jack |
1/4" Phone Jack - fits all AMS mounts.
|
|
AMS-10K |
10 k ohm Linear Pot & Knob Assy |
10 k ohm Linear Pot & Knob Assy fits all AMS mounts.
|
|
AMS-10KA |
10 ohm Audio Taper Pot & Knob Assy |
10 ohm Audio Taper Pot & Knob Assy fits all AMS mounts
|
|
AMS-1RC |
Single Phono Jack Assy |
Single Phono Jack Assy fits all AMS mounts
|
|
AMS-2RC |
Dual Phono Jack Assy |
Dual Phono Jack Assy fits all AMS mounts
|
|
AMS-BNC |
BNC Jack Assy |
BNC Jack Assy fits all AMS mounts
|
|
AMS-EM1 |
European Adapter Plate |
The AMS-EM1 is a 45mm square adapter plate that fits the European Modular mounting frames and cover plates. The adapter permits mounting of AMS accessories, standard and specialty connectors.
|
|
AMS-FP1 |
Filler Plate |
Filler Plate fits all AMS mounts
|
|
AMS-HR6 |
Mounting panel for 6 AMS Accessories |
Mounting panel for 6 AMS Accessories
|
|
AMS-LED |
LED Indicator Assy |
LED Indicator Assy fits all AMS mounts
|
|
AMS-LEDB |
Accessory Mounting System LED Indicator, Blue |
Accessory mounting system LED indicator, blue.
|
|
AMS-LEDG |
Accessory Mounting System Led Indicator, Green. |
Accessory mounting system LED indicator, green.
|
|
AMS-LEDR |
Accessory Mounting System Led Indicator, Red. |
Accessory mounting system LED indicator, red.
|
|
AMS-LEDY |
Accessory Mounting System Led Indicator, Yellow. |
Accessory mounting system LED indicator, yellow.
|
|
AMS-PB1 |
Momentary SPDT Pushbutton |
Momentary SPDT Pushbutton fits all AMS mounts
|
|
AMS-PJ1 |
Power Jack Assy for PS-24U, B, E |
Power Jack Assy for PS-24U, B, E fits all AMS mounts
|
|
AMS-SW2 |
Rocker Switch DPDT |
Rocker Switch DPDT fits all AMS mounts
|
|
AMS-UF1 |
Universal Frame |
Universal Frame fits RACK-UP® openings
|
|
AMS-XLF |
XLR 3-Pin Female Jack |
XLR 3-Pin Female Jack fits all AMS mounts
|
|
AMS-XLM |
XLR 3-Pin Male Jack |
XLR 3-Pin Male Jack fits all AMS mounts.
|
|
AV-AC2 |
Cable Kit for AV-HK1 - Dual Phono to Mini-Plug; Dual Phono to Mini-Jack |
Cable Kit for AV-HK1 - dual phono to mini-plug; dual phono to mini-jack.
|
|
AV-DC4 |
Line Level Audio Divider/Combiner with Ground Lift |
The AV-DC4 is a mono transformer-coupled audio divider/ combiner module for use with balanced, low or high impedance audio inputs and outputs.
|
|
AV-HK1 |
HUM KILLER Stereo Audio Isolation Transformer, Dual RCA Inputs and Outputs |
The AV-HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold-plated phono jacks.
|
|
AV-HK1X |
HUM KILLER Audio Isolation Module XLR input and output |
The AV-HK1X is a mono transformer isolation module for use with a balanced, low impedance source and either a low or high impedance load.
|
|
CP-1 |
Single Cover Plate - white |
Single Cover Plate - white
|
|
CP-1/G |
Single Cover Plate - gray |
For use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes.
|
|
CP-1S |
CP-1S Single Cover Plate, Stainless Steel |
CP-1S Single Cover Plate, stainless steel.
|
|
CP-2 |
Double Cover Plate - white |
Double Cover Plate - white
|
|
CP-2G |
Double Cover Plate, Gray |
Double cover plate for use with SMB-2 (surface mount box) and DC-2 (wall mount chassis) for mounting remote controls and jack panels. It is compatible with Decora style products and electrical boxes.
|
|
CP-2S |
CP-2S Double Cover Plate, Stainless Steel |
CP-2S Double Cover Plate, Stainless Steel.
|
|
CP-3 |
CP-3 Triple Cover Plate - white |
For use with RDL SMB-3 and DC-3 for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes.
|
|
CP-3G |
Triple Cover Plate, Gray |
Triple cover plate for use with SMB-3 (surface mount box) and DC-3 (wall mount chassis) for mounting remote controls and jack panels. It is compatible with Decora style products and electrical boxes.
|
|
CP-3S |
CP-3S Triple Cover Plate, Stainless Steel |
For use with RDL SMB-3 and DC-3 for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes
|
|
CP-4 |
CP-4 Quadruple Cover Plate - white |
For use with RDL SMB-4 and DC-4 for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes.
|
|
CP-4G |
Quadruple Cover Plate, Gray |
Quadruple cover plate for use with SMB-4 (surface mount box) and DC-4 (wall mount chassis) for mounting remote controls and jack panels. It is compatible with Decora style products and electrical boxes.
|
|
CP-4S |
CP-4S Quadruple Cover Plate, Stainless Steel |
For use with RDL SMB-4 and DC-4 for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes.
|
|
D-1/4F |
1/4 in. Phone Jack on D Plate - Solder type |
1/4 in. Phone Jack on D Plate - Solder type
|
|
D-A2 |
Line Output Assembly |
The D/DS/RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source.
|
|
D-AVM4 |
Audio and Video Monitor Jack Panels |
The D/S-AVM4 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors.
|
|
D-AVMB2 |
Audio and Video Monitor BNC Panels |
The D/S-AVMB2 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors.
|
|
D-Blank |
D Style Plate with No Jack Cut Out |
D Style Plate with No Jack Cut Out
|
|
D-BNC |
BNC Jack on Decora Wall Plate - Solder type |
BNC Jack on Decora Wall Plate - Solder type
|
|
D-BNC/D |
Insulated Double BNC Jack on Decora Wall Plate |
Insulated Double BNC Jack on Decora Wall Plate.
|
|
D-BZR |
Piezo Alert Module |
Piezo Alert Module
|
|
D-CIJ3 |
Consumer Input Jacks – Mono |
The D/S-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.
|
|
D-CIJ3D |
Consumer Input Jacks – Stereo |
The D/S-CIJ3D is the ideal choice in installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines.
|
|
D-CVMB2 |
D-CVMB2 Composite Video and Video Monitor Connection Plate |
The D/S-CVMB2 is the ideal choice in installations requiring a wall mounted video input or output plate with standard HD15 monitor and composite RCA jack connections.
|
|
D-D1 |
Single Plate for Standard and Specialty Connectors |
Single plate for standard and specialty connectors.
|
|
D-D2 |
Double Plate for Standard and Specialty Connectors |
Double plate for standard and specialty connectors.
|
|
D-ECR1 |
D-ECR1 Power On/Off Remote Control |
The D-ECR1 and DS-ECR1 are wall-mounted remote controls providing A/V system power-up and power-down. These controls directly interface with RDL products equipped with green coded RJ45 control jacks, such as the FP-ECC1 Energy Conservation Controller.
|
|
D-ECR1L |
D-ECR1L Power On/Off and Level Remote Control |
The D-ECR1L and DS-ECR1L are wall-mounted remote controls providing A/V system power-up and power-down. These controls directly interface with RDL products equipped with green coded RJ45 control jacks, such as the FP-ECC1 Energy Conservation Controller.
|
|
D-F |
Double Type F Jack on Decora Plate |
Double Type F Jack on Decora Plate.
|
|
D-J1 |
Microphone Input Assembly |
The D/DS/RCX-J1 is a complete microphone input panel assembly. Connections to the female front-panel XLR jack are made on a rear barrier block.
|
|
D-J2 |
Line Input Assembly |
The D/DS/RCX-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sources.
|
|
D-J3 |
Mic/Line Input Assembly |
The D/DS/RCX-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks.
|
|
D-MJPT |
Mini-jack pass-through plate |
The D-MJPT is a Decora style wall plate with a mini-jack (3.5 mm, 1/8") input or output connector.
|
|
D-PHN1 |
Single Phono Jack on Decora Plate - Solder type |
Single Phono Jack on Decora Plate - Solder type.
|
|
D-PHN2 |
Dual Phono Jacks on Decora Plate - Solder type |
Dual Phono Jacks on Decora Plate - Solder type.
|
|
D-RC2 |
Remote Audio Mixing Control |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
D-RC2M |
Remote Audio Mixing Control with Muting |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
D-RC3 |
Remote Audio Mixing Control |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
D-RC3M |
Remote Audio Mixing Control with Muting |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
D-RCX10R |
Remote Volume Control for RCX-5C |
Remote Volume Control for RCX-5C.
|
|
D-RCX2 |
Room Control for RCX-5C Room Combiner |
Room Control for RCX-5C Room Combiner.
|
|
D-RGB1 |
Component Video RGB Connection Plate |
The D/S-RGB1 is the ideal choice in installations requiring a wall mounted component video input or output. The panel is typically installed as an input plate, but may equally be used as an output jack panel.
|
|
D-SH1 |
Stereo Headphone Amplifier - Decora® panel with user level control |
The D/DS SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources.
|
|
D-SH1M |
Stereo Headphone Amplifier |
The D/DS-SH1M is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. It is ideally suited to applications as diverse as language translation, museums, interview studios and music stores.
|
|
D-TPP6A |
Format-A D-TPS6A with Video Pass-Through |
D-TPS6A or DS-TPS6A Format-A Audio Sender
|
|
D-TPP7A |
Format-A D-TPS7A with Monitor Pass-Through |
D-TPS7A or DS-TPS7A Format-A Audio Sender
|
|
D-TPR1A |
Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output |
The -TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
D-TPR2A |
Active Two-Pair Receiver - Twisted Pair Format-A - Stereo Phono jack Outputs |
The -TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
D-TPR3A |
Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs |
The -TPR3A modules are three-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
D-TPR3C |
Active Three-Pair Receivers - Twisted Pair Format-C - Composite Video & Stereo Audio |
The -TPR3C modules are three-pair audio receiving modules compatible with RDL® Format-C twisted pair products.
|
|
D-TPS1A |
Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom |
The -TPS1A modules are single-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
D-TPS2A |
Active Two Pair Sender Twisted Pair Format-A Stereo RCA Jack Inputs |
The D-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
D-TPS3A |
Active Three Pair Sender Twisted Pair Format-A XLR Microphone & Stereo RCA In |
The -TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
D-TPS3C |
Active Three Pair Senders Twisted Pair Format C Composite video & Stereo |
The -TPS3C modules are three-pair audio/video sending modules compatible with RDL® Format-C twisted pair products.
|
|
D-TPS6A |
Passive Single-Pair Sending Module |
The -TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products.
|
|
D-TPS7A |
Passive Single-Pair Sender |
The -TPS7A is a single-pair audio sending module compatible with RDL Format-A twisted pair products.
|
|
D-XLR2 |
XLR 3-pin Female and 3-pin Male on Decor Wallplate, Solder type |
XLR 3-pin female and 3-pin male on decor wallplate, solder type.
|
|
D-XLR2F |
Dual XLR 3-pin Female Jacks on Decora Wall Plate, Solder type |
Dual XLR 3-pin female jacks on decora Wallplate, solder type.
|
|
D-XLR2M |
Dual XLR 3-pin Male Jacks on Decora Walllate, Solder type |
Dual XLR 3-pin male jacks on decora walllate, solder type.
|
|
D-XLR3F |
XLR 3-pin Female Jack on Decora Wallplate, Solder type |
XLR 3-pin female jack on decora wallplate, solder type.
|
|
D-XLR3M |
XLR 3-pin Male Jack on Decora Wallplate, Solder type |
XLR 3-pin male Jack on decora wallplate, solder type.
|
|
DB-RCX1 |
DB-RCX1 Room Control for RCX-5C Room Combiner |
DB-RCX1 Room Control for RCX-5C Room Combiner
|
|
DC-1G |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DC-1W |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DC-2G |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DC-2W |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DC-3G |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DC-3W |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DC-4G |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DC-4W |
Desktop or Wall Mounted Chassis for Remote Controls and Panels |
The DC-1, 2, 3 and 4 desktop chassis hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
DMK5 |
Detachable Mounting Kit |
The DMK5 includes a complete set of five detachable mounting tabs to mount RDL® modules.
|
|
DR35-1M |
DIN Rail - 1 m |
DIN Rail - 1 meter.
|
|
DRA-35F |
Flat-Pak DIN Rail Adapter |
The DRA-35F is a DIN rail mounting bracket that provides positive mounting for any RDL FLAT-PAK™ module.
|
|
DRA-35P |
Desktop Power Supply DIN Rail Adapter
|
The DRA-35P provides DIN rail mounting for one desktop style power supply.
|
|
DRA-35R |
RACK-UP DIN Rail Adapter |
The DRA-35R provides DIN rail mounting for any RDL RACK-UP® or MAX RACK-UP module, allowing full access to the front and rear panels of the mounted modules. The DRA-35R attaches to a 35 mm DIN Rail.
|
|
DRA-35S |
STICK-ON DIN Rail Adapter |
The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module.
|
|
DRA-35S6 |
STICK-ON DIN Rail Adapter |
The DRA-35S6 provides a convenient way to attach up to six RDL STICK-ON modules to a DIN rail. Removable shelves make installing, adjusting and removing STICK-ON modules a snap.
|
|
DRA-35T |
TX Series DIN Rail Adapter |
The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
|
|
DS-1/4F |
1/4 in. Phone Jack on Decora Plate - Solder type |
1/4 in. Phone Jack on Decora Plate - Solder type.
|
|
DS-A2 |
Line Output Assembly |
The D/DS/RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source.
|
|
DS-AVM4 |
Audio and Video Monitor Jack Panels |
Audio and Video Monitor Jack Panels
|
|
DS-AVMB2 |
Audio and Video Monitor BNC Panels |
The D/S-AVMB2 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors.
|
|
DS-Blank |
Decora Style Plate with No Jack Cut Out |
Decora Style Plate with No Jack Cut Out.
|
|
DS-BNC |
BNC Jack on Decora Wall Plate Solder type, Stainless steel |
BNC Jack on Decora Wall Plate Solder type, Stainless steel.
|
|
DS-BNC/D |
Insulated Double BNC Jack on Decora Wall Plate, Stainless Steel |
Insulated Double BNC Jack on Decora Wall Plate, Stainless Steel.
|
|
DS-CIJ3 |
Consumer Input Jacks – Mono |
The D/S-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.
|
|
DS-CIJ3D |
Consumer Input Jacks – Stereo |
The D/S-CIJ3D is the ideal choice in installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines.
|
|
DS-CVMB2 |
DS-CVMB2 Composite Video and Video Monitor Connection Plate |
The D/S-CVMB2 is the ideal choice in installations requiring a wall mounted video input or output plate with standard HD15 monitor and composite RCA jack connections.
|
|
DS-D1 |
Single plate for standard and specialty connectors |
Single plate for standard and specialty connectors.
|
|
DS-D2 |
Double Plate for Standard and Specialty Connectors |
Double plate for standard and specialty connectors.
|
|
DS-ECR1 |
Power On/Off Remote Control |
The D-ECR1 and DS-ECR1 are wall-mounted remote controls providing A/V system power-up and power-down. These controls directly interface with RDL products equipped with green coded RJ45 control jacks, such as the FP-ECC1 Energy Conservation Controller.
|
|
DS-ECR1L |
Power On/Off and Level Remote Control |
The D-ECR1L and DS-ECR1L are wall-mounted remote controls providing A/V system power-up and power-down. These controls directly interface with RDL products equipped with green coded RJ45 control jacks, such as the FP-ECC1 Energy Conservation Controller.
|
|
DS-F |
Double Type F Jack on Decora Plate |
Double Type F Jack on Decora Plate.
|
|
DS-J1 |
Microphone Input Assembly |
The D/DS/RCX-J1 is a complete microphone input panel assembly. Connections to the female front-panel XLR jack are made on a rear barrier block.
|
|
DS-J2 |
Line Input Assembly |
The D/DS/RCX-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sources.
|
|
DS-J3 |
Mic/Line Input Assembly |
The D/DS/RCX-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks.
|
|
DS-MJPT |
Mini-jack pass-through plate |
The D-MJPT is a Decora style wall plate with a mini-jack (3.5 mm, 1/8") input or output connector.
|
|
DS-PHN1 |
Single Phono Jack on Decora Plate - Solder Type |
Single Phono Jack on Decora Plate - Solder type.
|
|
DS-PHN2 |
Dual RCA Jacks on Decora Wall Plate Solder type, Stainless Steel |
Dual RCA Jacks on Decora Wall Plate Solder type, Stainless Steel.
|
|
DS-RC2 |
Remote Audio Mixing Control |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
DS-RC2M |
Remote Audio Mixing Control with Muting |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
DS-RC3 |
Remote Audio Mixing Control |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
DS-RC3M |
Remote Audio Mixing Control with Muting |
The D-RC type remote audio mixing controls provide user-accessible volume knobs for two or three sources. Each control is available with level controls only, or with level controls plus a muting button for each channel.
|
|
DS-RCX2 |
DS-RCX2 Room Control for RCX-5C Room Combiner |
DS-RCX2 Room Control for RCX-5C Room Combiner
|
|
DS-RGB1 |
DS-RGB1 Component Video RGB Connection Plate |
The D/S-RGB1 is the ideal choice in installations requiring a wall mounted component video input or output. The panel is typically installed as an input plate, but may equally be used as an output jack panel.
|
|
DS-SH1 |
Stereo Headphone Amplifier - Decora® panel with user level control |
The D/DS SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources.
|
|
DS-SH1M |
Stereo Headphone Amplifier |
The D/DS-SH1M is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. It is ideally suited to applications as diverse as language translation, museums, interview studios and music stores.
|
|
DS-TPP6A |
Format-A D-TPS6A with Video Pass-Through |
Format?A D?TPS6A with video pass?through.
|
|
DS-TPP7A |
Format-A D-TPS7A with Monitor Pass-Through |
Format-A D-TPS7A with monitor pass-through.
|
|
DS-TPR1A |
Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output |
The DS-TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment.
|
|
DS-TPR2A |
Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - stereo phono jack outputs |
The DS-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment.
|
|
DS-TPR3A |
Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out |
The DS-TPR3A modules are three-pair audio receiving modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment.
|
|
DS-TPR3C |
Active Three-Pair Receivers - Twisted Pair Format-C - Composite video & stereo audio |
The DS-TPR3C modules are three-pair audio receiving modules compatible with RDL® Format-C twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect external equipment.
|
|
DS-TPS1A |
Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom |
Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom
|
|
DS-TPS2A |
Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs |
Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs.
|
|
DS-TPS3A |
Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic & stereo phono in |
Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic & stereo phono in.
|
|
DS-TPS3C |
Active Three Pair Senders Twisted Pair Format C Stainless Composite video and ster |
The DS-TPS3C modules are three-pair audio/video sending modules compatible with RDL® Format-C twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio and video sources.
|
|
DS-TPS6A |
Passive Single-Pair Sender |
The DS-TPS6A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products.
|
|
DS-TPS7A |
Passive Single-Pair Sender |
The DS-TPS7A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products.
|
|
DS-XLR2 |
XLR 3-pin Female and 3-pin Male on D Plate - Solder type |
XLR 3-pin Female and 3-pin Male on D Plate - Solder type ? Stainless steel.
|
|
DS-XLR2F |
Dual XLR 3-pin Female Jacks on D Plate - Solder type |
Dual XLR 3-pin Female Jacks on D Plate - Solder type? Stainless steel.
|
|
DS-XLR2M |
Dual XLR 3-pin Male Jacks on D Plate - Solder type |
Dual XLR 3-pin Male Jacks on D Plate - Solder type ? Stainless steel.
|
|
DS-XLR3F |
XLR 3-pin Female Jack on D Plate - Solder type |
XLR 3-pin Female Jack on D Plate - Solder type ? Stainless steel.
|
|
DS-XLR3M |
XLR 3-pin Male Jack on D Plate - Solder type |
XLR 3-pin Male Jack on D Plate - Solder type ? Stainless steel.
|
|
DTB |
STICK-ON® Series Detachable Terminal Block |
STICK-ON® Series Detachable Terminal Block
|
|
EC-6 |
6-inch North American AC Power Extension Cord |
6-inch north american AC power extension cord, pack of 6.
|
|
EM-TPR1A |
Active Single Pair Receiver-Twisted Pair Format-A 45mm,XLR Microphone/Line output |
The EM-TPR1A modules are single-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
EM-TPR2A |
Active Two-Pair Receiver, Twisted Pair Format-A, 45mm Stereo RCA jack outputs |
The EM-TPR2A modules are two-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
EM-TPR3A |
Active Three-Pair Receiver, Twisted Pair Format-A, 45mm - XLR and Stereo phono outputs |
The EM-TPR3A modules are three-pair audio receiving modules compatible with RDL Format-A twisted pair products.
|
|
EM-TPR3C |
Active Three-Pair Receivers, Twisted Pair Format-C, Composite Video & Stereo audio output |
The EM-TPR3C modules are three-pair audio receiving modules compatible with RDL Format-C twisted pair products.
|
|
EM-TPS1A |
Active Single-Pair Sender, Twisted Pair Format-A, 45mm XLR Microphone Input with Phant |
The EM-TPS1A modules are single-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
EM-TPS2A |
Active Two-Pair Sender-Twisted Pair Format-A, 45mm Stereo Phono Jack Inputs |
The EM-TPS2A modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
EM-TPS3A |
Active Three Pair Sender-Twisted Pair Format-A, 45mm XLR microphone & stereo RCA |
The EM-TPS3A modules are three-pair audio sending modules compatible with RDL Format-A twisted pair products.
|
|
EM-TPS3C |
Active Three-Pair Senders-Twisted Pair Format-C, Composite Video & Stereo Audio |
The EM-TPS3C modules are three-pair audio/video sending modules compatible with RDL Format-C twisted pair products.
|
|
EZ-ADA4 |
Stereo Audio Distribution Amplifier-1X4 |
The EZ-ADA4 is a stereo audio distribution amplifier with gain adjustment and audio level metering.
|
|
EZ-AFC2 |
Stereo Balanced,Unbalanced Audio Format Converter |
The EZ-AFC2 is a stereo bi-directional audio format converter with level controls. Conversion is provided between balanced rear-panel XLR jacks and unbalanced front-panel RCA jacks.
|
|
EZ-AVX4 |
Composite Video and Stereo Audio Input Switcher |
The EZ-AVX4 is a stereo audio and composite video source selector.
|
|
EZ-CC6 |
Component Chassis for 6 Increments of 1/6 Rack Width |
Component chassis for 6 increments of 1/6 rack width.
|
|
EZ-DC1 |
Desktop Chassis for 1/6 Rack Width for EZ Products |
Desktop chassis for 1/6 rack width for EZ products.
|
|
EZ-DC2 |
Desktop Chassis for 1/3 Rack Width EZ Products |
Desktop chassis for 1/3 rack width EZ products.
|
|
EZ-FP1 |
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6 |
1/6 rack width filler panel for EZ-RA6 or EZ-CC6.
|
|
EZ-HDA4A |
Stereo Headphone Distribution Amplifier-1X4 Front-Panel Outputs |
The EZ-HDA4A contains four stereo headphone amplifiers with individual front-panel volume controls.
|
|
EZ-HDA4B |
Stereo Headphone Distribution Amp - 1X4 Rear-Panel Outputs |
The EZ-HDA4B contains four stereo headphone amplifiers with individual front-panel volume controls.
|
|
EZ-HDA6 |
Stereo Headphone Distribution Amplifier - 1X6 Rear-Panel Outputs |
The EZ-HDA6 contains six stereo headphone amplifiers with individual front-panel volume controls.
|
|
EZ-HK1 |
Stereo Audio Hum Killer |
The EZ-HK1 is a superior-quality stereo audio transformer isolation module for use with unbalanced, high impedance audio inputs. Input and output connections are provided on gold-plated RCA jacks.
|
|
EZ-HK2 |
Composite Video Hum Killer |
The EZ-HK2 is a superior-quality video transformer isolation module for use with standard 75 ohm composite video. Input and output connections are provided on gold-plated RCA jacks.
|
|
EZ-HK3 |
Audio/Video Hum Killer |
The EZ-HK3 is a superior-quality stereo audio and composite video transformer isolation module for use with unbalanced, high impedance audio inputs and standard 75 ohm composite video. Input and output connections are provided on gold-plated RCA jacks.
|
|
EZ-HSX4 |
Stereo Audio Input Switcher with Headphone Amp - 4X1 |
The EZ-HSX4 is a stereo audio source selector with an output volume control.
|
|
EZ-MCP1 |
EZ-MCP1 Microphone Compressor |
The EZ-MCP1 is an in-line microphone compressor that produces consistent audio levels despite wide variations up to 30 dB from the microphone.
|
|
EZ-MPA1 |
Microphone Preamplifier - Stereo Output with Compressors |
The EZ-MPA1 is a microphone preamplifier with front-panel volume control and audio level metering.
|
|
EZ-MPA2 |
Dual Microphone Preamplifier - Stereo Output with Compressors |
The EZ-MPA2 is a stereo microphone preamplifier with front-panel volume controls and audio level metering.
|
|
EZ-MX4L |
Stereo Line-Level Audio Mixer - 4X1 |
The EZ-MX4L is a stereo audio mixer with four line inputs.
|
|
EZ-MX4ML |
Mic and Stereo Line Audio Mixer - 4X1 |
The EZ-MX4ML is a stereo audio mixer with two mic and two line inputs. Microphones connect through balanced XLR jacks that provide phantom voltage.
|
|
EZ-MXA20 |
20 Watt Stereo Audio Mixer Amplifier with EQ |
The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs.
|
|
EZ-PA20 |
20 Watt Stereo Audio Power Amplifier |
The EZ-PA20 is a stereo audio amplifier with one line input and a front-panel volume control.
|
|
EZ-PH1 |
Stereo Phono Preamplifier |
The EZ-PH1 is a stereo phono preamplifier with front-panel volume trimmers and audio level metering.
|
|
EZ-RA6 |
Rack Adapter for 6 Increments of 1/6 Rack Width |
Rack adapter for 6 increments of 1/6 rack width.
|
|
EZ-SD1 |
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6 |
1/6 Rack width storage drawer for EZ-RA6 or EZ-CC6.
|
|
EZ-SD2 |
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6 |
1/3 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6.
|
|
EZ-SMB1 |
Surface Mount Bezel for 1/6 Rack Width EZ Products |
Surface mount bezel for 1/6 rack width EZ products.
|
|
EZ-SMB2 |
Surface Mount Bezel for 1/3 Rack Width EZ Products |
Surface mount bezel for 1/3 rack width EZ products.
|
|
EZ-SX4 |
Stereo Audio Input Switcher - 4X1 |
The EZ-SX4 is a stereo audio source selector with an output volume control that adjusts the line-level output.
|
|
EZ-UCB2 |
Under Counter Bracket Pair for all EZ Product Widths |
Under counter bracket pair for all EZ product widths.
|
|
EZ-VDA2B |
Video Distribution Amplifier - 1X2 BNC NTSC/PAL |
The EZ-VDA2B is a composite video distribution amplifier with two outputs. The input and outputs are all 75 ? on BNC connectors.
|
|
EZ-VDA2R |
Video Distribution Amplifier - 1X2 RCA NTSC/PAL |
The EZ-VDA2R is a composite video distribution amplifier with two outputs. The input and outputs are all 75 ? on RCA connectors.
|
|
EZ-VDA3B |
Video Distribution Amplifier - 1X3 BNC NTSC/PAL |
The EZ-VDA3B is a composite video distribution amplifier with three outputs.
|
|
EZ-VM12 |
EZ-VM12 VGA/XGA Distribution Amplifier |
The EZ-VM12 is a high-resolution computer video distribution amplifier with two outputs.
|
|
EZ-VM13 |
EZ-VM13 VGA/XGA Distribution Amplifier |
The EZ-VM13 is a high-resolution computer video distribution amplifier with three outputs.
|
|
EZ-VM14 |
EZ-VM14 VGA/XGA Distribution Amplifier |
The EZ-VM14 is a high-resolution computer video distribution amplifier with four outputs.
|
|
EZ-VM22E |
VGA/XGA Switcher/Equalized Amplifier - 2 Inputs, 2 Outputs |
The EZ-VM22E is a high-resolution computer video source selector and distribution amplifier with two inputs and two outputs.
|
|
EZ-VM24E |
VGA/XGA Switcher/Equalized Distribution Amp - 2 Inputs, 4 Outputs |
The EZ-VM24E is a high-resolution computer video source selector and distribution amplifier with two inputs and four outputs.
|
|
EZ-VMD2 |
VGA/XGA Distribution Amplifier - 1X2 |
The EZ-VMD2 is a high-resolution computer video distribution amplifier with two outputs.
|
|
EZ-VMD4 |
VGA/XGA Distribution Amplifier - 1X4 |
The EZ-VMD4 is a high-resolution computer video distribution amplifier with four outputs.
|
|
EZ-VMD4E |
VGA/XGA Equalized Distribution Amp - 1X4 |
The EZ-VMD4E is a high-resolution computer video distribution amplifier with four outputs.
|
|
FP-ALC1 |
Automatic Level Control - Mono - Terminals |
The FP-ALC1 is a single channel (mono) module featuring a detachable terminal block for the input and output.
|
|
FP-ALC2 |
Automatic Level Control - Stereo - Phono Jacks |
The FP-ALC2 is a dual-channel (stereo) module featuring phono jack INPUTS and OUTPUTS.
|
|
FP-AVDA4 |
Stereo Audio/Video Distributor-1x4, Phono Jacks |
The FP-AVDA4 has a single 75 ohm input phono jack for the video signal and two phono jacks for the left and right audio inputs.
|
|
FP-BUC2 |
Balanced to Unbalanced Converter-2 channel |
The FP-BUC2 is the ideal choice for connectorized conversion from balanced to unbalanced audio. This module features two identical active (transformerless) channels.
|
|
FP-CH8 |
Chime Generator |
The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects.
|
|
FP-CT1 |
Locking Cable Tie Bracket for FP-RRA and FP-RRAH |
The FP-CT1 is a mounting bracket that fits the mounting track on FP-RRA and FP-RRAH rack mount panels.
|
|
FP-DCC1 |
12 Vdc to 24 Vdc Converter |
The FP-DCC1 is the ideal choice in many applications where audio or video modules need to be powered from a 12 Vdc source.
|
|
FP-DFC2 |
Digital Audio Format Converter (24/192) |
The FP-DFC2 is the ideal choice in many applications where an SPDIF source must be connected to AES/EBU professional digital audio equipment.
|
|
FP-ECC1 |
P-ECC1 Energy Conservation Controller |
The FP-ECC1 is a control unit designed to automatically turn an A/V system on and off for maximum energy savings.
|
|
FP-MP1 |
Studio Quality Mic Preamp w/ Phantom - Terminals & XLR |
The FP-MP1 is the ideal choice in most applications requiring a preamp. RDL's exclusive low-noise discrete circuitry produces studio quality low noise performance in an economical preamplifier.
|
|
FP-MPA2 |
Dual Mic Phantom Adapter 12, 24, 48 V - XLR |
The FP-MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones. Two identical circuits are provided, with connections through XLR jacks.
|
|
FP-MR2 |
FP-MR2 Message Repeater |
The FP-MR2 is a message repeater that permits electronic storage of a single recording up to one minute forty seconds in duration.
|
|
FP-MX3R |
Remote Controlled Line-Level Mixer |
The FP-MX3R is the ideal choice where a user-accessible mixer must control the volume of multiple sources.
|
|
FP-MX4 |
4 Mic or Line Input Mixer - Mic and Line Out |
The FP-MX4 is a single-channel audio mixing module featuring four identical inputs. Each input accepts either a mic or line level source. The output section provides four mixing potentiometers corresponding to the four inputs.
|
|
FP-PA18 |
FP-PA18 18 W Audio Power Amplifier with Power Supply |
The FP-PA18 is a high efficiency 18 W power amplifier with a line input, 8 ohm output, integral audio compressor and an automatic sleep mode. The FP-PA18 features a balanced line level input that may be connected unbalanced.
|
|
FP-PA18H |
FP-PA18H 18 W Audio Power Amplifier with Power Supply |
The FP-PA18H is a high efficiency 18 W power amplifier with a line input, 8 ohm output and audio compressor capable of operation in a high ambient temperature environment.
|
|
FP-PA20 |
Power Amplifier - 20 W 8 ohms |
The FP-PA20 features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver.
|
|
FP-PA20A |
20 W Mono Audio Amplifier, 70 V or 100 V |
The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver.
|
|
FP-PA20B |
20 W Mono Audio Amplifier 25 V |
The FP-PA20B features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver.
|
|
FP-PA35A |
35 W Mono Audio Amplifier 25 V, 70 V or 100 V, with Power Supply |
The FP-PA35A is the ideal choice in many applications where multiple 25 V, 70 V or 100 V speakers in a zone need to be powered from a single audio power amplifier.
|
|
FP-PEQ3 |
3 Band Parametric Equalizer, Terminal blocks and RCA jacks |
The FP-PEQ3 is the ideal choice in many applications where parametric equalization or acoustic notch filtering is needed. The FP-PEQ3 is a single-channel module featuring three identical independent filters.
|
|
FP-PSB1A |
Desktop Power Supply Mounting Bracket |
The FP-PSB1A mounts one desktop style power supply and it includes a provision to mount other modules.
|
|
FP-RRA |
Rack Adapter FLAT-PAK Series - 19 in. Fixed |
FLAT-PAK modules slide into FP-RRA mounting track 2 RU. Modules lock into position with optional FP-CT1.
|
|
FP-RRAH |
Rack Adapter FLAT-PAK Series - 19 in. Hinged |
FP-RRAH hinged panel provides easy module access.
|
|
FP-RRB1 |
Rear Rack Rail Mounting Kit for any FLAT-PAK Module |
The FP-RRB1 mounting kit contains two brackets to attach a FLAT-PAK module to a rear rack rail or to any flat surface.
|
|
FP-SPR1 |
SPDIF Repeater / Amplifier |
The FP-SPR1 is a single-channel module featuring three separate inputs. An input is provided in each conventional SPDIF format: BNC, phono and optical.
|
|
FP-SVDA4 |
S-Video Distribution Amplifier - 1x4 |
The FP-SVDA4 has a single 4-pin mini-DIN INPUT jack for the component video signal. The input is 75 ohm terminated.
|
|
FP-TP4PW |
Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through |
The FP-TP4PW is a four output power inserter compatible with RDL twisted pair products. It is powered from a 24 Vdc power supply using either one of the power jacks or the terminal block.
|
|
FP-TPX3A |
Format-A Twisted Pair Remote Controlled Mixer |
The FP-TPX3A is the ideal choice where a user-accessible mixer must control the volume of multiple sources in a zone.
|
|
FP-UBC2 |
Unbalanced to Balanced Converter - 2 Channel |
The FP-UBC2 is the ideal choice for connectorized conversion from unbalanced to balanced audio. This module features two identical channels.
|
|
FP-UBC6 |
Unbalanced to Balanced Converter - 6 Channel |
The FP-UBC6 is the choice for multiple channel connectorized conversion from unbalanced to balanced audio. This module features six identical channels, suited to converting consumer 6-channel surround sound into the professional audio format.
|
|
FP-VDA4 |
NTSC/PAL Video Distribution Amp - 1x4 - BNC |
The FP-VDA4 is the ideal choice in many applications where video signals need to be distributed. The FP-VDA4 has two jacks in the bridging input stage.
|
|
GB6 |
Grounding Bar for TS-1D Modules |
Grounding bar for TS-1D modules.
|
|
HD-ASC1 |
HD-ASC1 Amplifier Security Cover |
Mounts to an HD series mixer / amplifier to prevent user adjustment or tampering. The power button and associated indicators remain accessible with the HD-ASC1 installed.
|
|
HD-BP1 |
HD-BP1 BACK-PACK Rear Cover |
Mounts to an HD series mixer / amplifier to prevent user access to the rear panel. The back-pack holds the power supply and provides a completely closed back for the installed amplifier.
|
|
HD-FP1 |
HD-FP1 Filler Panel |
Fills an unused half of rack adapter or mounts in front of an HD series product to prevent user adjustment or tampering.
|
|
HD-FP2L |
HD-FP2L Filler Panel with Lens |
Mounts in front of an HD series product to allow viewing while preventing user adjustment or tampering. Lens is removable during setup.
|
|
HD-MA35 |
35watt Mixer Amplifier with Power Supply - Low Impedance Output 4 Ohm or 8 Ohm |
The HD-MA35 is a three input audio mixer amplifier for systems demanding a broad range of features and high energy efficiency. Two output power amplifier zones are provided, 35 W (Zone 1) and 2 W (Zone 2).
|
|
HD-MA35A |
35watt Mixer Amplifier with Power Supply, Constant Voltage Output 25 V, 70 V or 100 V |
The HD-MA35A is a three input audio mixer amplifier for systems demanding a broad range of features and high energy efficiency. Two output power amplifier zones are provided, 35 W (Zone 1) and 2 W (Zone 2).
|
|
HD-MA35U |
35watt Mixer Amplifier, 4 Ohm / 8 Ohm, with Power Supply |
The HD-MA35U is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency.
|
|
HD-MA35UA |
35watt Mixer Amplifier, 25, 70, 100 V, with Power Supply |
The HD-MA35UA is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency.
|
|
HD-PA35 |
35watt Power Amplifier with Power Supply, Low Impedance Output 4 Ohm or 8 Ohm |
The HD-PA35 is a single input audio amplifier for systems demanding high energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers.
|
|
HD-PA35A |
HD-PA35A 35 Watt Power Amplifier with Power Supply - Constant Voltage Output 25 V, 70 V or 100 V |
The HD-PA35A is a single input audio amplifier for systems demanding high energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers.
|
|
HD-PA35U |
35 Watt Power Amplifier, 4 Ohm / 8 Ohm, with Power Supply |
The HD-PA35U is a single input audio amplifier for systems demanding the highest energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers.
|
|
HD-PA35UA |
35watt Power Amplifier; 25, 70, 100 V, with Power Supply |
The HD-PA35UA is a single input audio amplifier for systems demanding the highest energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers.
|
|
HD-RA2 |
Rack Adapter |
Mounts 2 HD series products. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel.
|
|
HD-RA35U |
35watt Remote Mixer Amplifier, 4 Ohm / 8 Ohm, with Power Supply |
The HD-RA35U is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency. Two output power amplifier zones, 35 watts (Zone 1) and 4 watts (Zone 2), are driven from high-efficiency Class D..
|
|
HD-RA35UA |
35watt Remote Mixer Amplifier; 25, 70, 100 V, with Power Supply |
The HD-RA35UA is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency.
|
|
HD-WM1 |
HD-WM1 HD Series Wall Mount Bracket |
The HD-WM1 mounts a compatible HD series product and its power supply to a wall or other flat surface. The interior of the bracket holds the power supply with space to conceal excess wire length for a professional installation.
|
|
HD-WM2 |
HD-WM2 HD Series Wall Mount Bracket |
The HD-WM2 mounts a compatible HD series product and its power supply to a wall or other flat surface.
|
|
HR-ADC1 |
Analog to Digital Audio Converter |
The HR-ADC1 is a broadcast quality A/D converter that provides exceptional audio accuracy and clarity with any audio source or style.
|
|
HR-DAC1 |
Digital to Analog Converter, 24 bit 192 kHz |
The HR-DAC1 is the ideal choice in installations requiring high quality analog audio from an AES/EBU, AES-3ID or S/PDIF digital audio source.
|
|
HR-DDA4 |
Digital Audio Distributor |
The HR-DDA4 is the ideal choice in installations requiring high quality distribution of a digital audio signal.
|
|
HR-DSX4 |
Digital Audio Selector |
The HR-DSX4 is the ideal choice in installations requiring high quality source selection between digital audio signals.
|
|
HR-FP1 |
HALF-RACK Filler Panel |
The HR-FP1 is a filler panel that occupies one product space in RDL HALF-RACK mounting chassis, such as the HR-RA2.
|
|
HR-MP2 |
Dual Microphone Preamplifier |
The HR-MP2 is a dual channel microphone preamplifier with line-level outputs. Each section provides identical rear-panel signal connections and front-panel controls.
|
|
HR-MP2A |
Dual Microphone Preamplifier |
The HR-MP2A is a dual channel microphone preamplifier with line-level outputs. Each section provides identical rear-panel signal connections and front-panel controls.
|
|
HR-RA2 |
Rack adapter for HALF-RACK series |
The HR-RA2 is a 1RU rack chassis for mounting two RDL HALF-RACK products, plates or accessories.
|
|
HR-RU1 |
Mounting Adapter Kit for a RACK-UP Module |
The HR-RU1 is a kit of two brackets that allow a RACK-UP product to be mounted in one-half of an HR-RA2 Rack Adapter.
|
|
HR-UDC1 |
Universal Digital Audio Converter |
The HR-UDC1 is the ideal choice in installations where digital audio signals must be converted between consumer and professional formats.
|
|
MB-1 |
Mounting Kit - RU, ST and TX Series |
Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
|
|
MB-2 |
Mounting Kit - RU and TX Series |
MB-2 pair mounts a RACK-UP or TX module above or below a surface.
|
|
MB-3 |
Kit to Mount ST, TX Series Modules on FP Panel |
TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.
|
|
MBR-1U |
Installation of 1 RU product under a shelf |
The MBR-1U mounting kit contains two brackets designed to mount to any flat surface or under a shelf. The brackets hold standard 19" rack mounted equipment 1RU in height.
|
|
MSR-1 |
Snap Rail Adapter - STICK-ON Series |
STICK-ON securely clamps to mounting plate which fits 3.2 inch snap rail.
|
|
PM-1T |
Pole Mount Tray |
The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers and two PS-24U2 Power Supplies.
|
|
PM-1V |
Pole Mount Adapter |
The PM-1V vertically mounts any FLAT-PAK series module to a standard (1.5" I.D.) round projector pole or to any smaller round or rectangular pole.
|
|
PM-20HA |
PM-20HA Pole Mount Adapter for FP-PA20 Series Power Amplifiers & Power Supply - Horizontal |
The PM-20HA horizontally mounts an FP-PA20 type amplifier module and its power supply.
|
|
PM-20VA |
PM-20VA Pole Mount Adapter for FP PA20 Series Power Amplifiers & Power Supply - Vertical |
The PM-20VA vertically mounts an FP-PA20 type amp and its power supply
|
|
PM-3T |
PM-3T Pole Mount Tray |
The PM-3T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates any RU, TX, FP or STICK-ON Audio Power Amplifier and its associated RDL power supply.
|
|
PS-24AS |
24 Vdc Switching Power Supply, North American AC Plug, 500 mA, dc Plug |
Switching power supply, north american AC plug, 24 Vdc 500 mA, dc plug.
|
|
PS-24AX |
24 Vdc Switching Power Supply, Interchangeable AC Plug, 500 mA, dc Plug |
Switching power supply, interchangeable AC plug, 24 Vdc 500 mA, dc plug.
|
|
PS-24KS |
24 Vdc Switching Power Supply, North American AC Plug, 1 A, dc Plug |
Switching power supply, north american AC plug, 24 Vdc 1 A, dc plug.
|
|
PS-24KX |
24 Vdc Switching Power Supply, Interchangeable AC Plug, 1 A, dc Plug |
Switching power supply, interchangeable AC plug, 24 Vdc 1 A, dc plug.
|
|
PS-24V2 |
24 Vdc Switching Power Supply, No Cord, 2 A, dc Plug |
Switching power supply, no cord, 24 Vdc 2 A, dc plug.
|
|
PS-24V2A |
24 Vdc Switching Power Supply, with North American cord, 2 A, dc Plug |
Switching power supply, with north american cord, 24 Vdc 2 A, dc plug.
|
|
PT-AMG2 |
Portable Audio Signal Generator & Monitor |
This portable audio instrument is comprised of a precision audio oscillator, precision level meter and speaker.
|
|
PT-ASG1 |
Portable Audio Signal Generator |
The PT-ASG1 is a portable or benchtop audio oscillator used in applications requiring a stable audio signal source for system verification, alignment and testing.
|
|
PT-IC1 |
Carrying Case |
Compact padded nylon instrument case for carrying one or two RDL® portable testers, power supplies and associated test leads.
|
|
R-BZR |
Piezo Alert Module |
The R-BZR can be mounted in limited space using the adhesive methods popularized by RDL’s STICK-ON® series.
|
|
RC-1U |
Universal Rack Chassis for RU, ST and TX Series |
RC-1U holds up to 6 RACK-UP products or 12 STICK-ON modules. RACK-UPs, STICK-ONs and accessory panels may be installed in unlimited combinations.
|
|
RC-BTR1 |
Brass Trim Rings for ULTRASTYLE Wall Controls |
Brass trim rings for ULTRASTYLE wall controls.
|
|
RC-BTR2 |
Brass Trim Rings for ULTRASTYLE Wall Controls |
Brass trim rings for ULTRASTYLE wall controls.
|
|
RC-PS5 |
RC-PS5 19" Rack Mount for 5 Desktop Power Supplies |
Mounts up to 5 desktop style power supplies. Wiring may be routed out the sides and rear of the chassis.
|
|
RC2-ST |
2 Channel Remote Control for STICK-ONs |
The front panel of the RC2-ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2.
|
|
RC2-STS |
2 Channel Remote Control for STICK-ONs |
The front panel of the RC2-ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2.
|
|
RC4-RU |
4 Channel Remote Control for RACK-UPs |
The RC4-RU is a wall-box mounted remote module designed to directly control an RDL RU-SX4A Audio Switcher Module. The RU-SX4A provides solid state switching of one of four balanced/unbalanced audio inputs to a single balanced/ unbalanced audio output.
|
|
RC4-RUS |
4 Channel Remote Control for RACK-UPs |
The RC4-RU is a wall-box mounted remote module designed to directly control an RDL RU-SX4A Audio Switcher Module. The RU-SX4A provides solid state switching of one of four balanced/unbalanced audio inputs to a single balanced/ unbalanced audio output.
|
|
RC4-ST |
4 Channel Remote Control for ST-SX4 |
The RC4-ST is a wall-box mounted remote module designed to directly control an RDL ST-SX4 Audio Switcher Module. The ST-SX4 provides solid-state switching of one of four unbalanced audio inputs to a single unbalanced audio output.
|
|
RC4-STS |
4 Channel Remote Control for ST-SX4 |
The RC4-ST is a wall-box mounted remote module designed to directly control an RDL ST-SX4 Audio Switcher Module. The ST-SX4 provides solid-state switching of one of four unbalanced audio inputs to a single unbalanced audio output.
|
|
RCS4 |
Remote Channel Selector - 4 Channels - controls RU-SX4A |
The RCS4 is the ideal choice where sources are to be selected from a single or from multiple remote control locations, and visual indication is desired. The RCS4 is designed to directly interface with RDL control modules.
|
|
RCS4S |
Remote Channel Selector - 4 Channels - controls RU-SX4A - Stainless Steel |
The RCS4 is the ideal choice where sources are to be selected from a single or from multiple remote control locations, and visual indication is desired.
|
|
RCX-1 |
Room Control for RCX-5C Room Combiner |
The standard RCX remote control features pushbutton UP/DOWN volume adjustment, and pushbutton selection between MUSIC and LOCAL (microphones and/or line level inputs). The RCX-1 mounts in an RDL WB-2U wall box.
|
|
RCX-10R |
Remote Volume Control for RCX-5C |
This control provides level adjustment identical to the RCX-2 except without source selection. The RCX-10R is suited to systems in which rotary control is preferred and that do not use the background music source.
|
|
RCX-10RN |
Remote Volume Control for RCX-5C |
Remote volume control for RCX-5C.
|
|
RCX-10RS |
Remote Volume Control for RCX-5C |
Remote volume control for RCX-5C.
|
|
RCX-1N |
Room Control for RCX-5C Room Combiner, Ultrastyle Neutral |
Room control for RCX-5C room combiner, ultrastyle neutral.
|
|
RCX-1S |
Room Control for RCX-5C Room Combiner, Stainless Steel |
Room control for RCX-5C room combiner, stainless steel.
|
|
RCX-2 |
Room Control for RCX-5C Room Combiner |
Room control for RCX-5C room combiner.
|
|
RCX-2N |
Room Control for RCX-5C Room Combiner, Ultrastyle Neutral |
Room control for RCX-5C room combiner, ultrastyle neutral.
|
|
RCX-2S |
Room Control for RCX-5C Room Combiner, Stainless Steel |
Room control for RCX-5C room combiner, stainless steel.
|
|
RCX-3 |
Room Control for RCX-5C Room Combiner |
Room control for RCX-5C room combiner.
|
|
RCX-3N |
Room Control for RCX-5C Room Combiner, Ultrastyle Neutral |
Room control for RCX-5C room combiner, ultrastyle neutral.
|
|
RCX-3R |
Room Control for RCX-5C Room Combiner |
Room control for RCX-5C room combiner.
|
|
RCX-3RN |
Room Control for RCX-5C Room Combiner |
Room Control for RCX-5C Room Combiner
|
|
RCX-3RS |
Room Control for RCX-5C Room Combiner |
Room control for RCX-5C room combiner.
|
|
RCX-3S |
Room Control for RCX-5C Room Combiner |
Room control for RCX-5C room combiner.
|
|
RCX-5C |
Room Combining System Controller |
Room combining system controller.
|
|
RCX-5CM |
Room Combining System Controller-with Mic Muting |
Room combining system controller-with mic muting.
|
|
RCX-A2 |
Dual Phono Output Wall Plate Assembly |
The RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source.
|
|
RCX-A2N |
Dual Phono Output Wall Plate Assembly - Terminals |
The RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source.
|
|
RCX-A2S |
Dual Phono Output Wall Plate Assembly, Stainless |
The RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source.
|
|
RCX-BZL |
Bezel for RCX-CD1 |
Bezel for RCX-CD1.
|
|
RCX-CD1 |
Remote Control for RCX-5C Room Combiner |
Remote Control for RCX-5C Room Combiner.
|
|
RCX-CD1L |
Remote Control for RCX-5C Room Combiner |
Remote Control for RCX-5C Room Combiner, with key lock.
|
|
RCX-J1 |
XLR Mic Input Wall Plate Assy - Terminal Block |
The RCX-J1 is an audio input accessory from RDL offered in the ULTRASTYLE design. The RCX-J1 is a complete microphone input panel assembly.
|
|
RCX-J1N |
XLR Mic Input Wall Plate Assy - Terminal Block |
The RCX-J1 is an audio input accessory from RDL offered in the ULTRASTYLE design. The RCX-J1 is a complete microphone input panel assembly.
|
|
RCX-J1S |
XLR Mic Input Wall Plate Assy - Terminal Block |
The RCX-J1 is an audio input accessory from RDL offered in the ULTRASTYLE design. The RCX-J1 is a complete microphone input panel assembly.
|
|
RCX-J2 |
Dual Phono Input Wall Plate Assembly - Terminals |
The RCX-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sources.
|
|
RCX-J2N |
Dual Phono Input Wall Plate Assembly - Terminals |
The RCX-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sources.
|
|
RCX-J2S |
Dual Phono Input Wall Plate Assembly - Terminals |
The RCX-J2 is a complete unbalanced audio input panel assembly. The front panel features two phono jacks intended for mono or stereo consumer level sources.
|
|
RCX-J3 |
XLR Mic & Dual Phono Input Wall Plate Assy - Terminals |
The RCX-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks.
|
|
RCX-J3N |
XLR Mic & Dual Phono Input Wall Plate Assy - Terminals |
The RCX-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks.
|
|
RCX-J3S |
XLR Mic & Dual Phono Input Wall Plate Assy - Terminals |
The RCX-J3 is a complete audio input panel assembly. The front panel features a female XLR jack and two phono jacks.
|
|
RK-2U |
19" Utility Rack Chassis - 2 RU |
The RK-2U is a versatile equipment rack designed to mount to any flat surface or to sit on a shelf. The rack holds standard 19"" rack mounted equipment 2RU in height.
|
|
RK-2UX |
19"" Utility Rack Chassis 2 RU Extension |
The RK-2UX is an extension kit that adds 2RU in height to any RK-2U. Multiple kits may be added to an RK-2U to make it any height.
|
|
RLC-10R |
Rotary Level Control - Rotary Encoder |
The RLC-10R is the ideal choice for 0 to 10 Vdc or pulsed control from a remote location. Circuitry is based on optical encoder technology to produce long-term, trouble-free operation.
|
|
RLC-10RN |
Rotary Level Control - Rotary Encoder |
The RLC-10R is the ideal choice for 0 to 10 Vdc or pulsed control from a remote location. Circuitry is based on optical encoder technology to produce long-term, trouble-free operation.
|
|
RLC10K |
Remote Level Controller - 0 to 10 k ohms |
The RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire control input of the VCA module.
|
|
RLC10KM |
Remote Level Control with Muting |
The RLC10KM is the ideal companion to RDL VCA modules where levels are to be controlled from a single remote location and pushbutton muting is desired.
|
|
RLC10KMS |
Remote Level Control with Muting |
he RLC10KM is the ideal companion to RDL VCA modules where levels are to be controlled from a single remote location and pushbutton muting is desired.
|
|
RLC10KS |
Remote Level Controller - 0 to 10 k ohms |
The RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire control input of the VCA module.
|
|
RLC2 |
Remote Level Controller - Ramp |
The RLC2 is the ideal choice where levels are to be controlled from a single, or from multiple control locations, and visual level indication is desired.
|
|
RLC2S |
Remote Level Controller - Ramp |
The RLC2 is the ideal choice where levels are to be controlled from a single, or from multiple control locations, and visual level indication is desired.
|
|
RLC3 |
Remote Level Controller - Preset Levels |
The RLC3 is designed to directly interface with RDL® control modules which feature a 0 to 10 Vdc control input utilizing an external 10 k ohm resistive control, such as the ST-VCA2, RU-VCA2 and RU-VCA2D voltage controlled amplifiers.
|
|
RLC3S |
Remote Level Controller - Preset Levels |
The RLC3 is designed to directly interface with RDL® control modules which feature a 0 to 10 Vdc control input utilizing an external 10 k ohm resistive control, such as the ST-VCA2, RU-VCA2 and RU-VCA2D voltage controlled amplifiers.
|
|
RM-D3 |
19" Rack Mount for 3 Decora® Modules |
19" Rack Mount for 3 Decora®Modules
|
|
RM-D9 |
Rack Mount for 9 Decora® Modules |
Rack Mount for 9 Decora® Modules
|
|
RM-DFP1 |
Decora Filler Panel |
The RM-DFP1 is a filler panel for unused cutouts in Decora style rack chassis such as the RM-D3 or the RM-D9. The RM-DFP1 is constructed of steel with a black powdercoat finish to match the appearance of the rack chassis.
|
|
RM-EM5 |
Rack adapter for 5 EM modules |
The RM-EM5 is a 2 RU rack panel that mounts 5 European Modular (45 mm square) products such as the RDL EM series of modules and connector plates.
|
|
RM-EMFP1 |
RM-EM5 Filler Panel |
The RM-EMFP1 is a filler panel for unused cutouts in an RM-EM5 rack chassis. The RM-EMFP1 is constructed of steel with a black powdercoat finish to match the appearance of the rack chassis.
|
|
RM-FP1 |
One Rack Unit Filler Panel - 19 inch rack |
One Rack Unit Filler Panel - 19 inch rack
|
|
RM-FP2 |
Two Rack Unit Filler Panel - 19 inch rack |
Two Rack Unit Filler Panel - 19 inch rack
|
|
RM-MP12A |
Audio Monitor Panel - 12 Line or Speaker Inputs |
Audio Monitor Panel - 12 Line or Speaker Inputs
|
|
RMS-4 |
Wall Mount Plate for AMS Series Products |
The RMS-4 is an ULTRASTYLE™ design remote panel that provides wall mounting for 4 AMS accessories. Each port allows the mounting of any AMS accessory.
|
|
RMS-4N |
Wall Mount Plate for AMS Series Products |
The RMS-4 is an ULTRASTYLE™ design remote panel that provides wall mounting for 4 AMS accessories. Each port allows the mounting of any AMS accessory.
|
|
RT2 |
Remote Control Selector |
Remote Control Selector
|
|
RT2S |
Remote Control Selector |
Remote Control Selector
|
|
RU-ADA4D |
RU-ADA4D Audio Distribution Amplifier |
The RU?ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering.
|
|
RU-ADA8D |
RU-ADA8D Audio Distribution Amplifier |
The RU-ADA8D is an eight channel stereo audio distribution amplifier with input and output gain adjustments and input level metering.
|
|
RU-ADL2 |
Professional Audio Delay |
The RU-ADL2 is a DSP based dual-output delay for an analog audio source. It provides exceptional audio performance for the most critical applications in a professional audio environment.
|
|
RU-AFC2 |
RU-AFC2 Stereo Audio Format Converter |
The RU-AFC2 is a stereo bi-directional audio format converter. The bi-directional format allows the RU-AFC2 to fully convert the stereo input and stereo output of a consumer audio product to professional balanced standards.
|
|
RU-AVX4 |
Audio/Video Switcher - 4x1 - Phono |
The RU-AVX4 is the ideal choice in installations where a single set of audio/video signals needs to be selected from up to 4 consumer format (phono jack) video and audio sources.
|
|
RU-BR1 |
Mounting Bracket for RACK-UP Series |
The RU-BR1 mounts a RACK-UP module above or below a horizontal surface.
|
|
RU-DA4D |
Audio Distribution Amplifier - Balanced - 2x4 |
The RU-DA4D is the ideal choice in most applications where line-level signals need to be distributed.
|
|
RU-EQ2 |
Two Band Equalizer with Knobs - Terminals |
The RU-EQ2 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 ohm balanced, and is intended to drive unbalanced or balanced lines of 150 ohm or higher impedance.
|
|
RU-EQ3 |
Three Band Equalizer with Knobs - Terminals |
The RU-EQ3 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 ohm balanced, and is intended to drive unbalanced or balanced lines of 150 ohm or higher impedance.
|
|
RU-FP1 |
RACK-UP Filler Panel (and Reverse Mounting Kit) |
The RU-FP1 fills unused openings in an RU-RA3, RU-RA3A, RU-RA3HD or RC-1U, or reverse-mounts RACK-UP modules in an RU-RA3, RU-RA3A, or RU-RA3HD.
|
|
RU-MLA2 |
Dual Mic / Line Preamplifier |
The RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks.
|
|
RU-MLA2T |
Dual Mic/Line Preamplifier |
Dual Mic/Line Preamplifier
|
|
RU-MLD4 |
Mic / Line Distribution Amplifier |
The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks.
|
|
RU-MLD4T |
Mic/Line Distribution Amplifier |
Mic/Line Distribution Amplifier
|
|
RU-MX4 |
Pro 4 Input Mic/Line Mixer W/Phntm - Mic and Line Out |
The RU-MX4 is the ideal choice in many applications where a combination of balanced mic and/or unbalanced line-level signals needs to be mixed.
|
|
RU-MX4L |
Pro 4 Input Line Mixer - Mic and Line Out |
The RU-MX4L is the ideal choice in many applications where a combination of balanced and/or unbalanced line-level signals needs to be mixed.
|
|
RU-MX4LT |
Pro 4 Input Line Mixer - Mic and Line Out |
Pro 4 Input Line Mixer - Mic and Line Out
|
|
RU-MX4SC |
RU-MX4SC Security Cover for RU-MX4 |
Security Cover for RU-MX4
|
|
RU-MX4T |
Pro 4 Input Mic/Line Mixer W/Phntm - Mic and Line Out |
Pro 4 Input Mic/Line Mixer W/Phntm - Mic and Line Out
|
|
RU-MX5 |
5 Input Mic/Line Mixer w/Phntm - Mic and Line Out |
The RU-MX5 is the ideal choice in many applications where a combination of mic and/or line level signals need to be mixed with the ability for additional expansion.
|
|
RU-MX5ML |
5 Channel Mic/Line Audio Mixer with Phantom Power |
The RU-MX5ML is the ideal choice in many applications where a combination of balanced mic and/or balanced or unbalanced line-level signals needs to be mixed with the ability for additional expansion.
|
|
RU-OSC4A |
Sequencing Oscillator - 4 Frequencies |
The RU-OSC4A is the ideal choice in many installations where either manual and/or automatic audio reference tones are required. Output connections are made on the rear panel through full-size, clearly identified, barrier block terminals.
|
|
RU-PA40D |
40 W Stereo Audio Power Amp with VCA & Power Supply |
40 W Stereo Audio Power Amp with VCA & Power Supply
|
|
RU-PA518 |
Power Amplifier 5 W Stereo / 18 W Mono |
The RU-PA518 features two modes of operation: stereo and bridged mono. Depending on the mode of operation, the RU-PA518 can deliver from 5 to more than 18 watts of RMS power at the output.
|
|
RU-PSB1A |
RU-PSB1A Desktop Power Supply Mounting Bracket - Fits RACK-UP mounts |
RU-PSB1A Desktop Power Supply Mounting Bracket - Fits RACK-UP mounts
|
|
RU-RA3 |
Rack Mount for 3 RACK-UP Series Products |
RU-RA3 rack mounts 3 RACK-UP modules forward mounted or reverse mounted (using RU-FP1 filler panel / reverse mount kit). MAX RACK-UP modules also mount in a RU-RA3, however the RU-RA3HD is preferred for MAX RACK-UPs
|
|
RU-RA3A |
Rack Mount for 3 RACK-UP Series Products |
The RU-RA3A permits the mounting of five STICK-ON modules together with three RACK-UP modules. If AMS accessories are mounted in the RACK-UP mounting spaces, then up to 10 STICK-ON modules may be secured to the RU-RA3A shelf.
|
|
RU-RA3HD |
Rack Mount for 3 RACK-UP or MAX RACK-UP Products |
RU-RA3HD rack mounts 3 RACK-UP or MAX RACK-UP modules in fixed or mobile installations.
|
|
RU-SC1A |
RS-232/485 Serial Converter (Half-duplex) |
Serial converter is the choice in installations where both RS-232 and RS-485 serial communications protocols are used. The RU-SC1A is a bi-directional serial converter, exchanging data between the RS-232 and RS-485 ports.
|
|
RU-SC2 |
RS-232/422 Serial Converter (Full-Duplex) |
The RU-SC2 is the ideal choice in installations when two RS-232 devices requiring full-duplex communication are to be connected at a long distance.
|
|
RU-SH1 |
Stereo Headphone Amplifier |
The RU-SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The RU-SH1 is a dual channel headphone amplifier with balanced/unbalanced left and right inputs.
|
|
RU-SM16 |
Dual Audio Meter - Average/Peak/Hold |
The RU-SM16 is the ideal choice in most applications where audio level metering is to be designed into a system, or added to existing equipment. The RU-SM16 has two separate line-level inputs.
|
|
RU-SMA1 |
RACK-UP Mounting Plate - mounts any RACK-UP module in a cabinet or other flat surface |
The RU-SMA1 is a plate for mounting a RACK-UP® module to any flat surface. The opening permits the mounting of either a RACK-UP module or RDL AMS accessories. The RU-SMA1 is ideal for mounting a module in a cabinet or lectern.
|
|
RU-SP1 |
2 Watt Speaker |
The RU-SP1 is the choice where audio signals need to be monitored using amplified signals up to 2 W RMS. The RU-SP1 provides intelligible monitoring of voice and music sources while rolling off the low frequencies below the operating range of the speaker.
|
|
RU-SQ6A |
Sequencing Controller |
The RU-SQ6A is the choice in installations where sequential ON and sequential OFF functions are desired. Control and output connections are made on the rear panel through clearly identified detachable terminal blocks.
|
|
RU-SX4A |
Balanced Audio Switcher - 4x1 |
The RU-SX4A is the choice in many installations where either local and/or remote audio source selection is desired. Input and output connections are made on the rear panel through full-size, clearly identified barrier block terminals.
|
|
RU-TP4PW |
Power Inserter - Twisted Pair - four sets of outputs - signal loop-through |
The RU-TP4PW is a four output power inserter compatible with RDL twisted pair products. The RU-TP4PW is powered from a 24 Vdc power supply using either the power jack or the detachable terminal block.
|
|
RU-TPDA |
Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs |
The RU-TPDA is a four output signal and power distributor module compatible with RDL Format-A twisted pair products.
|
|
RU-TPDC |
Four Output Distributor - 1x4 - Twisted Pair Format-C |
Four Output Distributor - 1x4 - Twisted Pair Format-C
|
|
RU-TPS4A |
Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs |
The RU-TPS4A is a four output audio sender, signal and power distributor module compatible with RDL Format-A twisted pair products.
|
|
RU-TPS4C |
Four Output Sender / Distributor - 1x4 - Twisted Pair Format-C |
Four Output Sender / Distributor - 1x4 - Twisted Pair Format-C
|
|
RU-UDA4 |
Stereo Audio Distributor - 2x4 - Phono Jacks |
The RU-UDA4 is the optimum choice where connectorized, unbalanced line-level distribution is needed. This unit features two separate, isolated channels.
|
|
RU-VA2 |
Dual Adjustable Video Attenuator - BNC |
The RU-VA2 is the optimum choice where connectorized, rack-mounted video attenuation is needed. This unit features two separate, passive isolated channels.
|
|
RU-VCA2 |
Local/Remote Control Audio Attenuator - Mono |
The RU-VCA2 is an ideal choice for mono installations where either local and/or remote audio level control is desired. Single or multiple control points are possible using optional RDL level controllers.
|
|
RU-VCA2D |
Local/Remote Control Audio Attenuator - Stereo |
The RU-VCA2 or RU-VCA2D make an ideal choice for mono or stereo installations where either local and/or remote audio level control is desired. Single or multiple control points are possible using optional RDL level controllers.
|
|
RU-VDA4 |
NTSC/PAL Video Distribution Amp - 1x4 - BNC |
The RU-VDA4 is the ideal choice in most applications where video signals need to be distributed. Video inputs and outputs are made on the front panel via BNC, PHONO, or type F jacks.
|
|
RU-VSQ4 |
Sequencing Video Switcher - 4x1 - BNC |
The RU-VSQ4 is the ideal choice in most applications where up to four video signals need to be sequenced to a single output. The RU-VSQ4 has two rear-panel jacks for each of the four video bridging input stages.
|
|
RU-VSX4 |
Video Switcher - 4x1 - BNC |
The RU-VSX4 is the ideal choice in most applications where four video signals need to be switched to a single output. The RU-VSX4 has two rear panel-jacks for each of the four video bridging input stages.
|
|
RU-WHA4 |
Wiring Harness Adapter - RACK-UP Series |
Kit includes set of 4 wiring harness retainers
|
|
RU-WMP1 |
Wall Mount Plate for RACK-UP Series Products |
The RU-WMP1 is a wall mount plate assembly that wall mounts a single RACK-UP module or AMS accessory frame. It mounts to a standard 4-gang US electrical box.
|
|
RU-WMP1N |
Wall Mount Plate for RACK-UP Series Products |
The RU-WMP1 is a wall mount plate assembly that wall mounts a single RACK-UP module or AMS accessory frame. It mounts to a standard 4-gang US electrical box.
|
|
RU2-CS1 |
Serial Controlled Interface - Computer Control |
The RU2-CS1 controls 8 open-collector outputs. It also provides 8 separate 0 to 10 Vdc outputs to control external VCAs or other equipment with 0 to 10 Vdc control inputs.
|
|
RUC-4 |
ULTRASTYLE Universal Remote Control |
The RUC-4 is a wall control that is easily programmed to control a wide variety of RDL and other industry equipment.
|
|
RUC-4N |
ULTRASTYLE Universal Remote Control |
The RUC-4 is a wall control that is easily programmed to control a wide variety of RDL and other industry equipment.
|
|
SAS-82 |
Audio Controller |
SAS-82 Audio Controller is a 1/3 rack width module which receives audio and data input from either a SAS-88 or SAS-8i Audio Input Interface. The SAS-82 is supplied with a ribbon cable which connects to the prior port in the system.
|
|
SAS-8C |
8 Station Audio Controller |
SAS-8c 8 Station Audio Controller controls eight SourceFlex remote listening station. Six conductor wire connects each remote station with the SAS-8C.
|
|
SAS-8i |
Audio input chassis |
SAS-8i is an audio input chassis for SourceFlex™ Audio System that accepts 8 balanced or unbalanced sources. The SAS-8i has separate paging input and closure contacts.
|
|
SAS-HC8 |
Headphone Control Station |
The SAS-HC8 Headphone Control Station is a SourceFlex headphone listening station for use with exercise equipment or on a tabletop.
|
|
SAS-PM |
Portable Mount for SAS-SM8A |
Portable Mount for SAS?SM8A that is tabletop listening station.
|
|
SAS-RC8 |
Room Control Station |
SAS-RC8 Room Control Station is a SourceFlex listening station for wall mounting in a room. Source selection and volume adjustment buttons are provided on a sealed touch panel.
|
|
SAS-RC8N |
Room Control Station |
SAS-RC8 Room Control Station is a SourceFlex listening station for wall mounting in a room. Source selection and volume adjustment buttons are provided on a sealed touch panel.
|
|
SAS-RHP |
Headphone jack plate |
Headphone jack plate used with an SAS-RC8 Room Control
|
|
SAS-SM8A |
Tabletop listening station |
SAS-SM8A Sonic Mushroom™ is a tabletop monitor speaker with built-in user source selector, source display, and volume adjustment.
|
|
SAS-TC8 |
Wall mounted listening station |
SAS-TC8 is a wall mounted listening station for localized tabletop sound. The SAS-TC8 features source selection and volume adjustment buttons which are sealed touch controls that protect the internal circuitry.
|
|
SAS-TEM |
Mounting bracket |
Mounting bracket allowing an SAS-TC8 Tabletop Listening Station to mount to the edge of a table for localized sound
|
|
SMB-1G |
Surface Mount Boxes for Remote Controls and Panels |
The SMB-1, 2, 3 and 4 surface mount boxes hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
SMB-1W |
Surface Mount Boxes for Remote Controls and Panels |
The SMB-1, 2, 3 and 4 surface mount boxes hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
SMB-2G |
Surface Mount Boxes for Remote Controls and Panels |
The SMB-1, 2, 3 and 4 surface mount boxes hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
SMB-2W |
Surface Mount Boxes for Remote Controls and Panels |
The SMB-1, 2, 3 and 4 surface mount boxes hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
SMB-3G |
Surface Mount Boxes for Remote Controls and Panels |
The SMB-1, 2, 3 and 4 surface mount boxes hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
SMB-3W |
Surface Mount Boxes for Decora® Remote Controls and Panels |
Surface Mount Boxes for Decora® Remote Controls and Panels
|
|
SMB-4G |
Surface Mount Boxes for Remote Controls and Panels |
The SMB-1, 2, 3 and 4 surface mount boxes hold one, two, three or four Decora®-style products, including RDL remote controls and connector plates.
|
|
SMB-4W |
Surface Mount Boxes for Decora® Remote Controls and Panels |
Surface Mount Boxes for Decora® Remote Controls and Panels
|
|
SMK-12 |
STICK-ON Mounting Plate |
The SMK-12 allows removable STICK-ON mounting.
|
|
SR-10 |
STICK-ON Series Mounting Rack - 10 Modules |
SR-10 chassis can be mounted in a rack or on a backboard to provide mounting of 10 STICK-ONs.
|
|
SR-12A |
STICK-ON Series Mounting Rack - 12 Modules |
SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
|
|
SR-4 |
STICK-ON Series Mounting Rack - 7 Modules max. |
The SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted.
|
|
SR-TB10 |
Terminal Block Assembly for SR-4 |
The SR-TB10 terminal block kit includes a 10 position terminal block, polycarbonate label strip numbered 1 through 10 and mounting screws for use with the SR-4.
|
|
ST-ACR1 |
Line-Level Controlled Relay |
The ST-ACR1 is an Audio Controlled Relay in the STICK-ON series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST ACR1 is designed to switch on line level sources.
|
|
ST-ACR1M |
Microphone Level Audio Controlled Relay |
Each of the ST-ACR products is an Audio Controlled Relay in the STICK-ON series. The ST-ACR-1M is designed to switch on low-level sources, such as microphones or mic-level sources.
|
|
ST-ACR2 |
5 to 50sec Delay Line-Level Controlled Relay |
The ST-ACR2 is an Audio Controlled Relay in the STICK-ON series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST-ACR2 is designed to switch on line level sources.
|
|
ST-CL2 |
Line Level Compressor/Limiter |
The ST-CL2 is a high performance compressor/limiter designed to maintain a constant average output level and effective peak control over a wide range of input levels.
|
|
ST-CX2 |
Two Band Active Line-level Crossover |
The ST-CX2 is a line-level two band crossover to drive audio power amplifiers. The input and outputs are balanced and may be connected unbalanced if necessary. The input accepts a +4 dBu line-level signal.
|
|
ST-CX2S |
Subwoofer Crossover Filter |
The ST-CX2S is a subwoofer signal equalizer in the STICK-ON series of products from RDL. The ST-CX2S offers flexibility in equalization adjustment, with the exceptional performance of RDL.
|
|
ST-DA3 |
1x3 Line Level Distribution Amplifier |
The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads.
|
|
ST-EQ3 |
3 Band Equalizer - Line Level |
The ST-EQ3 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 ohm balanced, and is intended to drive unbalanced or balanced lines of 150 ohm or higher impedance.
|
|
ST-FS6 |
Ferrite Suppressor / RF Filter |
The ST-FS6 is used in applications where an excessive RF level is induced in the audio cables producing audio interference in the system.
|
|
ST-GCA3 |
Gain Control Amplifier - Line Level |
The ST-GCA3 constantly adjusts for changes in input levels, bringing up low levels, and reducing gain for high levels. The audio level is constantly adjusted to maintain the correct output. The AGC adjustment rate is switch-selectable.
|
|
ST-GLA1 |
Gated Line Amplifier - Noise Gate |
The ST-GLA1 is a self-gated line amplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal with integral noise reduction.
|
|
ST-GSP1 |
Gated Speech Preamplifier - Mic to Line |
The ST-GSP1 is a gated speech preamplifier designed to be used in a variety of situations where it is desired to produce an automatically switched line-level signal from a microphone.
|
|
ST-HP3 |
300 Hz and 500 Hz High Pass Filter |
The ST-HP3 is the ideal choice where line-level audio filtering needs to be provided at the input of a power amplifier for protection of public address horns against damage from low frequencies.
|
|
ST-IC1 |
Intercom Amplifier |
The ST-IC1 is the ideal choice where an intercom system is to be installed, or where an amplifier is needed to bring a mic level up to a 1 W speaker level with optional muting capability.
|
|
ST-LCR1 |
Logic Controlled Relay - Momentary |
The ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure.
|
|
ST-LCR1H |
High Power Logic Controlled Relay - 8 A |
The ST-LCR1H provides dry-switching contacts for high power switching, an LED indicator showing relay activation, and input connections.
|
|
ST-LCR2 |
Logic Controlled Relay - Latching |
The ST-LCR2 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure.
|
|
ST-LCR3 |
Logic Controlled Relay - Dual Alternate Pulse |
The ST-LCR3 is ideally suited to applications where momentary pulses are needed from a single control signal. The module provides a momentary pulse when a logic signal at its input first becomes active.
|
|
ST-LEQ1 |
Loudness Equalizer - Use with VCA |
The ST-LEQ1 has two line-level audio inputs and a single line-level audio output.
|
|
ST-MA2 |
Muting Monitor Amplifier - 2 Watt |
The ST-MA2 is a compact audio monitor amplifier with control inputs to mute or reduce the gain of its output.
|
|
ST-MPA2 |
Microphone Phantom Adapter - 2 Channel |
The ST-MPA2 contains two identical phantom power circuits and a common power supply input.
|
|
ST-MX2 |
2 Mic or Line Input Mixer - Mic and Line Out |
The ST-MX2 is used in any application requiring mixing of two audio sources. A mic may be mixed with a line-level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier
|
|
ST-MX3 |
3 Line Input Mixer - Line Out |
The ST-MX3 is a line-level mixer module in the STICK-ON Series of products. It provides audio mixing of three line-level inputs with individual input gain adjustments.
|
|
ST-NG1 |
White and Pink Noise Generator |
The ST-NG1 is the choice where random white or pink noise is needed. It is suitable either as a reference noise source for audio measurements or as a masking noise source in engineered sound or counter-intelligence applications.
|
|
ST-OSC2A |
Audio Oscillator - 1kHz and 10 kHz |
Each of the ST-OSC2 products is a Dual Audio Oscillator. These products are designed for quick, convenient installation, and reliable operation in a variety of audio applications.
|
|
ST-OSC2B |
Audio Oscillator - 100 Hz and 400 Hz |
Audio Oscillator - 100 Hz and 400 Hz
|
|
ST-PA18 |
18 Watt 8 ohms Audio Power Amplifier - STICK-ON series module |
The ST-PA18 features a balanced line level input that may be connected unbalanced. The gain control range will accommodate standard unbalanced levels as well as professional balanced levels.
|
|
ST-PA2 |
Utility Audio Amplifier - 2 Watt |
The ST-PA2 features a single, unbalanced audio input, a gain control, and two outputs.
|
|
ST-PA6 |
Audio Power Amplifier - 6 Watt |
The ST-PA6 represents the second generation of RDLs® breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever.
|
|
ST-PBR4 |
ST-PBR4 STICK-ON Mounting Bracket |
The ST-PBR4 is a mounting frame with slots for four STICK-ON modules.
|
|
ST-PD5 |
Power Distributor - Linear - (PS-24A/B/E/K) |
The ST-PD5 is the ideal choice where power distribution and decoupling is needed. It is suitable for powering up to five modules from a single linear power supply, providing a common low-impedance source for each module.
|
|
ST-PD5U |
Power Distributor - Switching - (PS-24U2/A) |
The ST-PD5U is the ideal choice where power distribution from a current-limited switching power supply is needed. It is suitable for powering up to five modules from a single power supply.
|
|
ST-PH1 |
Stereo Phono Preamplifier |
The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 k ohm impedance unbalanced phono cartridge inputs.
|
|
ST-RG1 |
Ramp Generator - 0 to 10 Vdc Output |
The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA2. Any number of Up and Down buttons may be connected to the ST-RG1.
|
|
ST-RRB1 |
Rear rack rail mounting kit for any STICK-ON module |
Rear rack rail mounting kit for any STICK-ON module
|
|
ST-RX2 |
Audio Routing Switcher - 1x2 |
The ST-RX2 has a single line-level audio input and two line-level audio outputs.
|
|
ST-SH2 |
Stereo Headphone Amplifier |
The ST-SH2 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources.
|
|
ST-SSR1 |
Line-Level Audio Switch - 2x1 |
The ST-SSR1 was designed for absolute silent switching of audio signals. It supports two balanced line-level inputs and one balanced output. Each can be used unbalanced as well.
|
|
ST-SX4 |
Unbalanced Audio Switcher - 4x1 |
The ST-SX4 accepts up to four unbalanced audio sources. Any of these sources may be selected to feed the output, or all sources may be switched off.
|
|
ST-TC1 |
Telephone System Coupler - CO Line Simulator |
The ST-TC1 is intended to be connected to an on-site telephone system switching unit KSU.
|
|
ST-UBA2 |
Unbalanced to Balanced Amplifier - 2 channel |
The ST-UBA2 is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu.
|
|
ST-UMX3 |
Universal Audio Mixer - 3 Mic or Line x 1 Mic or Line |
The ST-UMX3 is a three-channel audio mixer for combining mic-level or line-level signals to a single output.
|
|
ST-VCA3 |
Voltage Controlled Amplifier |
The ST-VCA3 is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V).
|
|
ST-VOX1 |
Voice Operated Relay |
The ST-VOX1 is an Audio Controlled Relay in the STICK-ON® series. When used in intercom or talkback applications, the ST-VOX1 may be triggered from an unbalanced microphone.
|
|
ST-VP1 |
Voice-Over / Paging Module - Manual |
The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required.
|
|
ST-VP2 |
Automatic Ducking Module |
The ST-VP2 can be wired into any line-level input of a paging amplifier.
|
|
STA-1 |
Dual Bal/Unbal Line Amp: -12 to 20 dB Gain |
The STA-1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and low-impedance outputs. Each of the two identical circuits is both an electronic line transformer and a line amplifier.
|
|
STA-1M |
Audio Line Amplifier - Mono |
It allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance.
|
|
STA-2A |
Dual High Gain Line Amplifiers |
The STA-2A is a dual-channel, line-level audio preamplifier. Each channel is identical. The audio inputs are bridged at 20 kilo ohm and accept either an unbalanced or a balanced audio signal.
|
|
STD |
Passive Audio Divider/Combiner - 10 k ohm, 150 ohm, 600 ohm |
Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output.
|
|
STD-10K |
Passive Audio Divider/Combiner - 10 k ohm |
Passive Audio Divider/Combiner - 10 k ohm
|
|
STD-150 |
Passive Audio Divider/Combiner - 150 ohm |
Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output.
|
|
STD-600 |
Passive Audio Divider/Combiner - 600 ohm |
Passive Audio Divider/Combiner - 600 ohm
|
|
STM-1 |
Microphone Preamplifier - 50 dB Gain |
The STM-1 is a low-cost quality microphone preamplifier designed for use in commercial sound and broadcast applications.
|
|
STM-2 |
Adjustable Gain Mic Preamp - 35 to 65 dB Gain |
The STM-2 is a quality low-noise microphone preamplifier designed for use in commercial sound, broadcast, and recording.
|
|
STM-2X |
Switched Mic Preamp - 35 to 65 dB Gain |
The STM-2X is the choice in many installations where a microphone preamplifier is required, and is the ideal choice where either a toggle-type switch or push-to-talk switch is to be provided for microphone control.
|
|
STM-3 |
High Gain Mic Preamp - 35 to 75 dB Gain |
The STM-3 is a quality low-noise microphone preamplifier designed for use in surveillance, commercial sound, broadcast, and recording where higher than normal gain is required.
|
|
STM-DA3 |
Mic Level Distribution Amplifier - 1x3 |
The STM-DA3 is designed for use in commercial sound, broadcast and recording applications. The 1.2 k ohm balanced input accepts a wide variety of microphone input levels without loading professional low impedance microphones.
|
|
STM-LDA3 |
Studio Quality Mic Preamp with phantom - 3 Line Outputs |
The STM-LDA3 is designed for use in commercial sound, broadcast and recording applications. The 1.2 k ohm balanced input accepts a wide variety of microphone input levels without loading professional low-impedance microphones.
|
|
STP-1 |
Universal Audio Attenuators - 2 Channel |
The STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed. The low-cost STP-1 eliminates the costly labor of figuring and assembling fixed pads.
|
|
STR-19A |
STICK-ON Series Racking System - 12 Modules |
STR-19A provides for compact mounting of 12 STICK-ONs and provision for cable harnessing.
|
|
STR-19B |
STICK-ON Series Racking System - 10 Modules |
STR-19B provides for angle mounting of 10 STICK-ONs with ease of adjustment as well as cable harnessing
|
|
SYS-CS1 |
System 84 Control Interface |
The SYS-CS1 controls all 32 switching functions of an RDL System 84 audio mixing matrix. It also provides 8 separate 0 to 10 Vdc outputs to control external VCAs or other equipment with 0 to 10 Vdc control inputs.
|
|
SYS-IC1 |
Parallel Interface Cable for System 84 |
Parallel Interface Cable for System 84.
|
|
SYS-TB |
Terminal Block Adapter for System 84 |
Terminal Block Adapter for System 84.
|
|
SYS84SM |
Remote Status Monitor for SYS84 |
The SYSTEM 84 STATUS MONITOR provides a simultaneous visual indication of all inputs and outputs of a System 84 Audio Mixing Matrix. The four horizontal rows of LEDs correspond to the four System 84 outputs.
|
|
SYSTEM-84A/B |
Audio Mixing Matrix 8 x 4 Stereo, 8 x 4 Mono |
32 Discrete 5 Vdc control lines provide manual or PC control of 8 input to 4 output audio mixing, switching and routing. Multiple audio channels may be summed or soft-switched with low distortion, low noise, frequency response and attenuation.
|
|
TS-1D |
Transient Suppressor |
The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines.
|
|
TX-10B |
Bridging Input Transformer |
Bridging input transformer.
|
|
TX-1A |
Adjustable Balanced to Unbalanced Transformer. |
Adjustable balanced to Unbalanced transformer.
|
|
TX-1W |
Music on Hold Amplifier - 1 Watt |
The TX-1W is the ideal choice in on-site installations where the central telephone switching unit needs to be fed with music, voice or combined music/voice signals.
|
|
TX-70A |
Unbalanced Line Output Speaker Level Input Interface |
Unbalanced line output speaker level input interface.
|
|
TX-8i |
Headphone Isolation Transformer |
Headphone isolation transformer.
|
|
TX-A2 |
Audio Converter - Balanced to Unbalanced |
The TX-A2 is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level mono source and consumer equipment unbalanced inputs.
|
|
TX-A2D |
Dual Audio Converter - Balanced to Unbalanced |
The TX-A2D is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level stereo source and consumer equipment unbalanced inputs.
|
|
TX-AFC1F |
Balanced to Unbalanced Audio Transformer |
Balanced to Unbalanced Audio Transformer.
|
|
TX-AFC1M |
Unbalanced to Balanced Audio Transformer RCA, XLR |
Unbalanced to balanced audio transformer RCA, XLR.
|
|
TX-AT1 |
600 ohm 1:1 Audio Isolation Transformer |
600 ohm 1:1 audio isolation transformer.
|
|
TX-AT1S |
Audio Isolation Transformer with Suppression |
Audio isolation transformer with suppression.
|
|
TX-AVX |
Automatic Video Switch, BNC |
The TX-AVX is the ideal choice in installations where automatic switchover to an alternate video source is needed when the primary signal is lost.
|
|
TX-J2 |
Unbalanced Input Transformer |
Unbalanced input transformer.
|
|
TX-LC2 |
Unbalanced to Balanced Line Combiner |
The TX-LC2 is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed a balanced (or unbalanced) audio line.
|
|
TX-LM2 |
Line Level to Mic Level Transformer |
Line level to mic level transformer.
|
|
TX-MVX |
2x1 Manual Rmt Controlled Video Switch, BNC |
The TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals.
|
|
TX-MX2R |
Audio Mixer / Distribution Amplifier |
The TX-MX2R is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed either one or two unbalanced destinations.
|
|
TX-PA40D |
40 W Stereo Audio Power Amplifier |
The TX-PA40D is a 40 W stereo audio power amplifier. The TX-PA40D is ideal for projector-mounted amplification, classrooms, boardrooms, audio/visual carts, localized stereo sound and video conferencing.
|
|
TX-PCR1 |
Paging Controlled Relay |
The TX-PCR1 is the ideal choice in many applications where switching needs to be controlled from a constant-voltage amplified audio source. The module will trigger on any program material, with paging sources being the most common.
|
|
TX-PSD1 |
Paging Sound Detector |
The TX-PSD1 is the ideal choice in many applications where switching needs to be controlled from a constant-voltage amplified audio source. The module will trigger on any program material, with paging sources being the most common.
|
|
TX-RA5 |
19inch Racking System, 5 modules 1RU |
TX-RA5 chassis is a single rack unit accessory which provides mounting for up to 5 TX Series products.
|
|
TX-RRB1 |
Rear rack rail Mounting kit for any TX series Module |
The TX-RRB1 mounting kit contains a bracket to attach a TX module to a rear rack rail or to any flat surface.
|
|
TX-TP1PW |
Power Inserter |
The TX-TP1PW is a single output power inserter compatible with RDL twisted pair products. The TX-TP1PW is powered from a 24 Vdc power supply using either the power jack or the detachable terminal block.
|
|
TX-TPR1A |
Active Single-Pair Receiver |
The TX-TPR1A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output.
|
|
TX-TPR3A |
Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs |
The TX-TPR3A is a three-pair audio receiving module compatible with RDL Format-A twisted pair products. Three outputs are provided corresponding to the three signal pairs A, B and C.
|
|
TX-TPR3C |
Active Three-Pair Receiver, Composite Video and stereo Audio |
The TX-TPR3C is a three-pair audio/video receiving module compatible with RDL Format-C twisted pair products. It is built in the versatile Max-TX series enclosure. The durable adhesives provided with the TX TPR3C permit permanent or removable mounting.
|
|
TX-TPR6A |
Passive Single-Pair Receiver, Twisted Pair Format-A |
The TX-TPR6A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three FORMAT-A pairs feeds the module output.
|
|
TX-TPS1A |
Active Single-Pair Sender, Twisted Pair Format-A |
The TX-TPS1A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One line-level source may be connected to the module using either the -10 dBV unbalanced RCA phono jack.
|
|
TX-TPS3A |
Active Three-Pair Sender, Twisted Pair Format-A |
The TX-TPS3A is a three-pair audio sending module compatible with RDL Format-A twisted pair products. Three line-level sources may be connected to the module, each using either the -10 dBV unbalanced RCA phono jack.
|
|
TX-TPS3C |
Active Three-Pair Sender, Twisted Pair Format-C |
The TX-TPS3C is a three-pair audio/video sending module compatible with RDL® Format-C twisted pair products. It is built in the versatile Max-TX series enclosure. The durable adhesives provided with the TX-TPS3C permit permanent or removable mounting.
|
|
TX-TPS6A |
Passive Single-Pair Sender, Twisted Pair Format-A |
The TX-TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One low-impedance +4 dBu balanced line-level audio source connects to the module using the detachable terminal block
|
|
TX-VCR |
Video Controlled Relay - BNC |
The TX-VCR is the ideal choice in installations where a control signal is needed based on the absence or presence of valid video signals.
|
|
TX-VLA1 |
Video Line Amplifier - Adjustable Gain and EQ |
The TX-VLA1 is the ideal choice in installations where video signals are being fed into long cables, or where a low video signal needs to be amplified.
|
|
UC-1 |
Single Wide Enclosure |
The UC-1 and 2 are ULTRASTYLE tabletop utility chassis for mounting RDL modules and accessories.
|
|
UC-2 |
Double Wide Enclosure |
The UC-1 and 2 are ULTRASTYLE tabletop utility chassis for mounting RDL modules and accessories.
|
|
US-A1 |
Wall Box Adapter, Single Unit to Double Box |
The US-A1 is an ULTRASTYLE design adapter that allows single width products to mount in RDL® WB-2U or US double electrical box.
|
|
US-A1N |
Wall Box Adapter, Single Unit to Double Box |
The US-A1 is an ULTRASTYLE design adapter that allows single width products to mount in RDL® WB-2U or US double electrical box.
|
|
WB-1U |
Universal Wall Box, Single |
Side and rear mounting holes secure box in new construction. Folding tabs secure box in an existing wall or cabinets.
|
|
WB-2U |
Universal Wall Box, Double |
Mount in International or US walls and cabinets.
|
|
WDG1 |
Table Top Chassis for RU, ST and TX Series |
The WDG1 is a tabletop enclosure for mounting two STICK-ON modules together with one RACK-UP module.
|
|
WDG1L |
Table Top "Wedge" Chassis |
The WDG1L is a tabletop enclosure for mounting any RACK?UP or MAX RACK?UP module. ULTRASTYLE™ design. All steel construction.
|
|
WH1 |
Warthog Power Supply Adapter - Surfacemount |
The WH1 allows the mounting of up to six power supplies in one location. Each kit includes 1 mounting bracket for 6 Supplies, 6 UL/CSA 6 inch power cords, 6 sets detachable mounting tabs, 6 cable ties to secure supplies.
|
|
WH2 |
Warthog Power Supply Adapter - Rackmount |
The WH2 4 RU Panel mounts to rear rack rails to provide the same power supply mounting convenience as the WH1.
|
