The Crestron CP3 presents a new benchmark in control system technology. Featuring the Core 3 OS control engine, the CP3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout your facility to make life easier, greener, more productive, and more enjoyable.
Core 3 OSToday's commercial buildings and custom homes comprise more technology than ever before, and all these systems need to be networked, managed, and controlled in fundamentally new ways. The IP based Core 3 platform is engineered from the ground up to deliver a network-grade server appliance capable of faithfully handling everything from boardroom AV and home theater control to total building management.Core 3 OS embodies a distinctively robust, dynamic, and secure platform to elevate your system designs to higher levels of performance and reliability. Compared to other control systems, Core 3 OS provides a pronounced increase in processing power and speed with more memory, rock solid networking and IP control, and a unique modular programming architecture.
- Next generation control system
- Core 3 OS™ — substantially faster and more powerful than other control systems
- Exclusive modular programming architecture
- Vector floating point coprocessor
- Onboard 512MB RAM & 4GB Flash memory
- Expandable storage up to 1TB
- Rear panel MMC memory card slot
- High-speed USB 2.0 host port
- Industry-standard Ethernet and Cresnet® wired communications
- Onboard e-Control® Web server
- Supports Core 3 UI™ XPanel Web-based remote control
- Supports Crestron Mobile® control apps for iPhone®, iPad® and Android™
- Supports Fusion RV™ and SNMP remote management
- One RS-232/422/485 COM port with hardware and software handshaking
- Two RS-232 COM ports with software handshaking only
- 8 IR/serial, 8 relay, and 8 Versiport I/O ports
- Installer setup via Crestron Toolbox™ or Internet Explorer®[1]
- Backwards compatible to run existing SIMPL programs
- Full Unicode (multi-language) support
- Increased network throughput and security
- Native Active Directory
- IIS v.6.0 Web Server
- IPv6 ready
- Front panel USB computer console port
- 1-space rack-mountable
-
Control Engine :
Core 3 OS; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
-
Memory :
SDRAM 512 MB; Flash 4 GB; Memory Card expandable storage up to 32 GB using MMC compatible card (not included). External Storage up to 1 TB using USB mass storage device (not included) Note: Memory card and USB mass storage are mutually exclusive; only one may be used
-
Communications :
Ethernet: 10/100 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; industry-standard TCP/IP stack; UDP/IP; CIP; DHCP; SSL; IEEE 802.1X; SNMP; BACnet®/IP[1]; IPv4 or IPv6; Active Directory authentication; IIS v.6.0 Web Server; SMTP e-mail client; installer setup via Crestron Toolbox™ or MSIE[2]; supports all e-Control®, Core 3 UI™ XPanel, Crestron Mobile®, Fusion™ and RoomView® applications. Cresnet®: Cresnet master mode; USB: Supports USB HID and USB mass storage class devices via rear panel USB 2.0 host ports, supports computer console via front panel USB 2.0 device port. RS-232/422/485: For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, one port also supports RS-422 or RS-485 and hardware handshaking. IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
-
Connectors & Card Slots :
RELAY OUTPUT 1 – 8: (2) 8-pin 3.5mm detachable terminal block comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts. I/O 1 – 8: (1) 9-pin 3.5mm detachable terminal block comprising (8) “Versiport” digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V high/1 and <1.875V low/0;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k ohms with pull-up resistor disabled;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
-
IR - SERIAL OUTPUT 1 – 8 :
(2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
-
COM 1 :
(1) 5-pin 3.5mm detachable terminal block; Bidirectional RS-232/422/485 port; Up to 115.2k baud; hardware and software handshaking support
-
COM 2 – 3 :
(2) 3-pin 3.5mm detachable terminal blocks; Bidirectional RS-232 ports; Up to 115.2k baud; software handshaking support
-
Memory :
(1) MMC compatible card slot; Accepts Multimedia Memory Cards (MMC) up to 32 GB for memory expansion
-
USB :
(1) USB Type A female; USB 2.0 port for storage devices
-
LAN :
(1) 8-wire RJ45 jack; 10Base-T/100Base-TX Ethernet port
-
NET :
(1) 4-pin 3.5mm detachable terminal block, Cresnet master port; Outputs power to Cresnet devices if a power pack is connected to the 24VDC power input jack; Receives Cresnet network power if no power pack is connected to the 24VDC power input jack; See “Power Requirements” for additional specifications
-
24VDC 2.0A :
(1) 2.1mm barrel DC power jack, 24 Volt DC power input; PW-2420RU power supply included; Passes through to NET port to power Cresnet devices;
See “Power Requirements” for additional specifications
-
G :
(1) 6-32 screw, chassis ground lug
-
COMPUTER (front) :
(1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only
-
Controls & Indicators :
PWR: (1) Green LED, indicates operating power supplied from power pack or Cresnet network; NET: (1) Amber LED, indicates communication with the Cresnet system. MSG: (1) Red LED, indicates control system has generated an error message; HW-R: (1) Recessed pushbutton for hardware reset ; SW-R: (1) Recessed pushbutton for software reset; LAN: (rear) (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
-
Power Requirements :
Power Pack 2.0 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included. Available Cresnet Power 24 Watts (1 Amp @ 24 Volts DC) when using power pack. Cresnet Power Usage 15 Watts (0.625 Amp @ 24 Volts DC) when using Cresnet network power
-
Environmental :
Temperature 41° to 113°F (5° to 45°C); Humidity 10% to 90% RH (non-condensing); Heat Dissipation 50 BTU/Hr
-
Enclosure :
Chassis: Metal, black finish; Faceplate: Extruded metal, black finish, polycarbonate label overlay; Mounting: Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
-
Depth :
6.56 in
-
Depth :
166.62 mm
-
Height :
1.70 in
-
Height :
43.18 mm
-
Product Weight :
3.12 lbs
-
Product Weight :
1.42 kg
-
Width :
17.28 in
-
Width :
438.91 mm
