The DIN-2MC2 is a 2-channel motor control module designed to provide control of bidirectional motors for drapes, shades, projection screens, lifts, skylights, and gates. Each channel supports up/down or open/close control of a conventional three-wire bidirectional type motor up to 1/2 HP at voltages up to 240 Volts. Built-in timing and interlock logic make it easy to program the DIN-2MC2 for failsafe operation.
- Dual-channel bidirectional motor control
- Supports 120 to 240 Volt 50/60 Hz
- Override input
- Cresnet communications
- Setup via front panel or software
- Programmable functionality via DIN-AP2
- 6M wide DIN rail mounting
-
Operating Temperature (Maximum) :
104 F
-
Operating Temperature (Maximum) :
40 C
-
Operating Temperature (Minimum) :
32 F
-
Operating Temperature (Minimum) :
0 C
-
Depth :
2.35 in
-
Depth :
59.69 mm
-
Height :
3.71 in
-
Height :
94.23 mm
-
Width :
4.18 in
-
Width :
106.17 mm
-
Product Weight :
0.21 kg
-
Product Weight :
0.46 lbs
-
Motor Control Channels :
2
-
Per Channel :
0.5 HP at 240 Volts AC, 50/60 Hz
-
Module Total :
1 HP at 240 Volts AC, 50/60 Hz
-
Load Types :
3-Wire bidirectional motors
-
Cresnet Power Usage :
3 W (1.13 Amps at 24 Volts DC)
