|
|
|
AKG Acoustics, U.S.
18V Battery power supply for phantom powering a single condenser microphone.
Model: B 18
|
|
|
|
|
AKG Acoustics, U.S.
Battery-operated in-line power supply for powering MicroMic III or other electret condenser mics. Provides two XLR inputs and 1 XLR output.
Model: B 29L
|
|
|
|
|
AMX
Mio Remote Charging Cradle Kit
Model: MIO-RCC-KIT
|
|
|
|
|
AMX
Table Charging Station for 5 and 5.2 Modero Touch Panels
Model: MVP-TCS-52
|
|
|
|
|
Bosch Conferencing and Public Address Systems
This unit can simultaneously re-charge up to 5 DCN-WLIION battery packs. The charging status of each pack is shown on individual charge capacity indicator LEDs.
Model: DCN-WCH05
|
|
|
|
|
Bosch Conferencing and Public Address Systems
The DCN-WCH05-US can simultaneously re-charge up to 5 DCN-WLIION battery packs. The charging status of each pack is shown on individual charge capacity indicator LEDs.
Model: DCN-WCH05-US
|
|
|
|
|
Bosch Conferencing and Public Address Systems
NiMH battery pack for use with LBB 4540 Pocket Receivers. Temperature sensor for optimal charging process.
Model: LBB 4550/00/1
|
|
|
|
|
Bosch Conferencing and Public Address Systems
The charging units are used for charging and storing the LBB 4540 pocket receivers.
Model: LBB 4560
|
|
|
|
|
Bosch Conferencing and Public Address Systems
The charging units are used for charging and storing the INT-RXxx Pocket Receivers. Charging status indication on the pocket receivers. Mains input with loop-through facility; male and female Euro mains socket.
Model: LBB 4560/00
|
|
|
|
|
Bosch Conferencing and Public Address Systems
The charging units are used for charging and storing the INT-RXxx Pocket Receivers. Charging status indication on the pocket receivers. Mains input with loop-through facility; male and female Euro mains socket.
Model: LBB 4560/00-US
|
|
|
|
|
Bosch Conferencing and Public Address Systems
The charging units are used for charging and storing the INT-RXxx Pocket Receivers. Charging status indication on the pocket receivers.
Model: LBB 4560/50
|
|
|
|
|
Bosch Conferencing and Public Address Systems
The charging units are used for charging and storing the INT-RXxx Pocket Receivers. Charging status indication on the pocket receivers.
Model: LBB 4560/50-US
|
|
|
|
|
Clear-Com
4-port quick charger with adapter for BAT41 batteries.
Model: AC40A
|
|
|
|
|
Clear-Com
CellCom battery clip charger. The units houses and charges 5 battery clips. The CEL-FS-CHRGR can be used to re-charge up to five Cellcom or Freespeak beltpack battery packs in place of the beltpacks’ internal charging circuit.
Model: Cellcom CEL-FS-CHRGR
|
|
|
|
|
Clear-Com
FreeSpeak battery clip charger. The units houses and charges 5 battery clips. The CEL-FS-CHRGR can be used to re-charge up to five Cellcom or Freespeak beltpack battery packs in place of the beltpacks’ internal charging circuit.
Model: FreeSpeak CEL-FS-CHRGR
|
|
|
|
|
Clear-Com
T-BC5A is battery charger for Tempest Lithium-polymer rechargable batteries. T-BC5A charges up to 5 batteries from empty to full in approximately 2.5 hours.
Model: T-BC5A
|
|
|
|
|
Clear-Com
The WTR1C is a single battery charger that provides built-in maintenance capability to maximize the battery cycle life for the WBS-670 and WBS-680 wireless intercom systems.
Model: WTR1C
|
|
|
|
|
Clear-Com
The WTR1C is a single battery charger that provides built-in maintenance capability to maximize the battery cycle life for the WBS-670 and WBS-680 wireless intercom systems.
Model: WTR1C-E
|
|
|
|
|
Clear-Com
The WTR4C is a 4-battery charger that provides built-in maintenance capability to maximize the battery cycle life for the WBS-670 and WBS-680 wireless intercom systems.
Model: WTR4C
|
|
|
|
|
Clear-Com
The WTR4C is a 4-battery charger that provides built-in maintenance capability to maximize the battery cycle life for the WBS-670 and WBS-680 wireless intercom systems.
Model: WTR4C-E
|
|