|
|
|
New
Premier Mounts
The P5080T is a tilting low-profile mount for flat-panels up to 300 lb. Typically fits displays ranging from 50 - 80 in. or with a mounting pattern of 200 x 200 mm to 1100 x 700 mm.
Model: P5080T
Mounts »
Display Mounts
|
|
|
|
|
New
Premier Mounts
The model-specific line of Fine-Tune Projector (FTP) mounts brings ease-of-use and precise adjustment to the forefront of projector mounting.
Model: FTP-097
Mounts »
Projector Mounts
|
|
|
|
|
New
Premier Mounts
This configuration includes three monitor mounts on a curved bow and a 15" single pole with table clamp base
Model: MM-BC153
Mounts »
Display Mounts
|
|
|
|
|
New
Premier Mounts
This video conference camera shelf for P-Series mounts easily installs above the display and includes a slot for securing the camera.
Model: SHLF-VC
Mounts »
Camera Mounts
|
|
|
|
|
New
Premier Mounts
The PDS Series of model-specific low-profile mounts are cost efficient for projects requiring a large number of projectors.
Model: PDS-097
Mounts »
Projector Mounts
|
|
|
|
|
New
Premier Mounts
This Cable-Conduit Pipe Cover Kit fits 1 1/2 inch NPT & 2 inch NPT, 2 inch Tubing, 1 inchx 1 inch Square Tubing, and Premier Elliptical Tubing.
Model: CPC
Mounts »
Related Mount Products
|
|
|
|
|
Premier Mounts
The AM100 is a slim mounting wall plate that provides three options for the swing arm placement, allowing the mount to swing out from the left, right or center, based on the installation requirements
Model: AM100
Mounts »
Display Mounts
|
|
|
|
|
|
|
|
Premier Mounts
The AM185 pivot features a controlled arm that can be installed to swing out to the left or to the right
Model: AM185
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM18W supports flat-panels up to 18 lbs or with a VESA mounting pattern of 75x75mm or 100x100mm.
Model: AM18W
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM225F extending scissor mount is for flat-panels up to 225 lb
Model: AM225F
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM225T scissor-style mount supports displays up to 225 lb. and provides smooth and easy adjustments from the wall. It extends 20 in. from the wall, offers ten degrees of continuous tilt and provides 45° of swivel to both sides.
Model: AM225T
Mounts »
Display Mounts
|
|
|
|
|
|
|
|
|
|
|
Premier Mounts
The AM50 is a dual arm swingout mount for flat-panel displays up to 50 lb
Model: AM50
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM500 is an articulating wall mount for displays up to 500 lb
Model: AM500
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM501 is an articulating wall mount for displays up to 500 lb. The mount holds flat-panel displays 82 in. to 85 in. The positive and negative tilt adjustment allows the mount to be installed level and plum.
Model: AM501
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM502 is a model-specific wall mount for the Panasonic 103 in. and Runco 103 in. display. With a weight capacity of 500 lb., the mount's dual articulating arms allow even the heaviest display to be pulled away from the wall for service or alignment.
Model: AM502
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM50-B dual arm swingout mount for flat-panel displays up to 50 lb
Model: AM50-B
Mounts »
Display Mounts
|
|
|
|
|
Premier Mounts
The AM50S-B is a single arm swingout mount for flat-panel displays up to 50 lb
Model: AM50S-B
Mounts »
Display Mounts
|
|
Premier Mounts
