Send us your feedback
Email (optional)
Comments
Opticis Co., Ltd.
manufacturer's navigation
| Total Products: 41 | ||
|---|---|---|
| Model | Product Name | Description |
| AVFX-100 | Two (2) fiber VGA, Audio and RS-232 Extender |
The VGA Extender, AVFX-100 enables integrated extension of Analog RGB video, audio and serial data interface up to 2km (6,600feet) over single-mode or 300m (985feet) over multi-mode fiber. |
| BR-100 | 19" Multi-module mounting rack |
BR-100 adopts multi-rate SDI formats, 3G-SDI(SMPTE-424M), HD-SDI(SMPTE-292M), SD-SDI by 8-channel of CWDM, AES-3id audio compatible with SMPTE-276 and Dolby-E, RS-232/422 and 100Base Ethernet extending all signals over 20km for broadcast. |
| BR-100 (AT-1xx, AR-100) | 19" rack mountable & stand-alone audio extender |
It transmits 8-channel of AES-3id signals by CWDM over one (1) fiber. |
| BR-100 (DX-1, DX-2) | 19" rack mountable & stand-alone RS422/232 extender |
It can transmit and receive RS-422 and RS-232 signals at 10Mbps over one (1) fiber. It is available to convert signals between RS-422 and RS-232 and vice versa. |
| BR-100 (EX-1, EX-2) | 19" rack mountable & stand-alone Ethernet extender |
It can transmit and receive Ethernet (100Base-Tx) signal over one (1) fiber. |
| BR-100 (VT-1xx, VR-100) | 19" rack mountable & stand-alone video extender |
It can handle multi-rate SDI formats such as 3G-SDI (SMPTE 424M), HD-SDI (SMPTE 292M), SD-SDI (SMPTE 259M) and DVB-ASI by 8-channel of CWDM and provide both cable equalizer and Clock and Data Recovery features. |
| BR-100 (WM-81) | 19" rack mountable & stand-alone multi/de-multiplexer |
WM-81 combines 8-different wavelength fiber-optic inputs into 1-fiber and also divides combined signal into 8-different wavelength outputs. User can configure 8 x SDI extenders and WM-81 in one BR-100 to transmit 8 different 3G-SDI signal s over 1 fiber. |
| BR-300, BR-310 | 19" Multi-module Mounting Rack |
BR-300 adopts up to 12 units of 3G-SDI extenders and each module slot is connected into a central power bus. It is for primary power and BR-310 for dual power with load-sharing and redundant back-up. |
| DDFX-100-TR | Two (2) fiber Detachable Dual link DVI Module |
DDFX-100-TR transmits uncompressed WQXGA (2560x1600), 60Hz or WQUXGA (3840x2400), 33Hzvertical refresh rate of Dual-Link DVI up to 500meters (1640feet) over two (2) LC multi-mode fibers.It also supports Self-EDID programming feature. |
| DVFX-110-TR | One (1) fiber Detachable DVI Module |
DVFX-110 supports all DVI resolutions up to WUXGA(1920x1200) at 60Hz and extends up to 1000m(3280ft) over one (1) SC single-mode & 500m for SC multi-mode fiber. It splits one (1) signal from the trasmitter into sixteen (16) signals with optical splitter. |
| HDFX-100-TR | One (1) fiber HDMI Extenders |
Supports all HD TV resolutions up to 1080p @60Hz
Extends HDMI up to 1000m over one (1) SC single-mode fiber
Supports HDMI 1.3a up to 24-bit color depth
Complies with HDCP / Be Rack mountable |
| HDMS-200 | HDMI to 3G-SDI Converter |
Converts HDMI to 3G-SDI with embedded audio and time code and 8/10 bit resolution. Supports RGB4:4:4, YCbCr 4:4:4 or 2:2:2 HDMI input video format and 12S,48kHz audio input format. It indlues HDMI input female connectors and two BNC output receptacles. |
| M1-100x | Point-to-Point all fiber DVI cable |
M1-100x supports all DVI resolutions up to WUXGA (1920x1200) at 60Hz and extends signal up to 500m (1640 feet) over a bundled cable of multi-mode fibers. It uses power either through the DVI pin or with an external +5V adapter. |
| M1-1POE | Point-to-Point fiber-optic DVI cable |
M1-1POE supports all DVI resolutions up to WUXGA (1920x1200) at 60Hz and extends signal up to 100m (326 feet) over hybrid cable with four (4) multi-mode fiber for TMDS and copper wires for DDC/HDCP. |
| M1-2000 | HDMI Optical Extension Cable |
Extends HDMI up to 100 Meters while supporting HDTV up to 1080p/WUXGA at 60 Hz. DVI digital graphic data up to WUXGA (1,920x1,200) at 60Hz also supported. Plug & Play connection that uses host +5Vdc source. Negligible EMI/RFI.
|
| M1-201CA-TR | Fiber Detachable Optical Extender (One-Fiber Connection) |
Extends DVI up to 500 Meters and provides WUXGA (1920x1200) 60Hz resolution using a single fiber SC Connection. Self programming EDID feature, and free from cable EMI/RFI. Installation flexibility with detachable modules.
|
| M1-201DA-TR | Two Fiber Detachable Extender |
The M1-201DA-TR DVI Extender works with both Single Mode and Multi-Mode Fiber, and is certified to IEC/EN 60601-1-2 for Medical applications. It supports up to WUXGA(1920x1200) at 60Hz, and extends DVI signals up to 1,500 Meters. Free from EMI/RFI foibles |
| M1-201SA-TR | Fiber Detachable Optical Extender (Four-Fiber Connection) |
Transmit DVI signals up to 500 Meters and provide? WUXGA (1920x1200) resolution at 60Hz. Medical Certification - Class 1 Laser Eye Safety. EMI/RFI free. Install cable into tight areas, and attach the modules later.
|
| M1-203D-TR | Stretch DVI and Audio with Two Optical Fibers |
M1-203D-TR is an Optical DVI and Audio extender that offers extremely long distance extension of high-quality uncompressed data between a host processor video card and a display. |
| M1-2R2H | Fiber detachable Optical HDMI Extender |
Extends DVI/HDMI up to 100M while supporting HDTV up to 1080p/WUXGA at 60 Hz. The product is HDMI 1.3 compliant (12 bit color mode). Optical connection is with a pair of duplex LC fiber optic cables. |
| M1-2R2VI-DU | DVI Dual Link Optical Extender |
The Opticis Dual Link DVI transmits up to 100 Meters, while supporting 2560x1600 resolution at 60Hz.Complies with DVI Dual Link standard, and supports DDC2B mode.It provides the DDC/HDCP connection over UTP cable through an RJ45 jack. |
| M1-3R2VI-DU | DVI Dual Link Optical Extender |
These transmitter/receiver modules extend the Dual Link DVI signal up to 100 Meters, and support up to 2560x1600 resolution at 60Hz. The units comply with the Dual Link standard. The DDC2B and Self EDID features are both supported. |
| M2-100/M2-210 | USB Pure Optical/Hybrid Extension Cable |
Extend USB 1.1 signals up to 50 Meters. USB 2.0 compatible. Select from the M2-100 All Fiber version that is EMI/RFI free for signal isolation; or the Hybrid M2-210 fiber optic/copper version allowing you to power downstream module & USB device. |
| M2-100D | USB Detachable Module |
All Fiber USB now available in detachable module. Model M2-100D uses two duplex LC connectors to attach module to fiber optic patchcord. Run cable through tight areas, and attach modules later. |
| M4-200/201 | Optical FireWire Repeater |
Complies with IEEE1394a (DS Port) and 1394b standard (Beta Port – 9 pin) to extend signals up to 500 Meters. Free from copper cable EMI/RFI emissions, the products provide full duplex 800Mbps data rate over choice of 50/62.5/125 um fiber. |
| M5-1003 | Optical KVM Extender |
Extends DVI, USB and RS232 up to 2Km using DDC2B or Virtual DDC.Supports DVI up to WUXGA (1920x1200) resolution at 60Hz, and USB 1.1.The downlink module offers a 4 channel USB1.1 hub.Optical connections to two duplex LC single mode fibers.
|
| M5-2A2-TR | Digital Video/Audio Optical Extender |
Extends DVI, Audio and RS232 up to 2Km when using smart DDC ready button on front panel. Extends HDMI, Audio and RS232 up to 200 Meters with DDC/HDCP. Selectable audio interfaces; RCA, SPDIF (Optic or Coax). |
| ODM44/66/88/1818/3636 | DVI Matrix Router |
The Spider series DVI/HDMI matrix routers offer you the benefit to combine single to multiple crossing ways without networking. |
| ODSG-01 | Multimedia Test Signal Generator |
The ODSG-01 hand held signal generator is designed to offer various video signals, test patterns, and stored image and audio files for easy and accurate testing of HD equipment. Output both digital and analog video signals. |
| ODSG-01HS | DVI/HDMI-HDSDI/SDI Converter |
Opticis’ HDMI/DVI to HDSDI/SDI converter, ODSG-01-HS converts high resolution HDMI or DVI sources to a SMPTE standard HD or HD-SDI signal for broadcasting on air or integrating into a professional video production system. |
| OHD14/OHD18 | HDMI Distributor |
Opticis new DVI Distributor, OVD 14 or OVD18 makes one(1) DVI video source split into four(4) or eight(8) DVI displays, respectively without any signal loss or digital noise. Also, HDMI source and displays are compatible by using HDMI-DVI cable. |
| OHD15 , OHD310 | HDMI Distributor |
The Spider family of HDMI Distributors allows you to distribute 1 HDMI input to 5 outputs, or execute switching among 3 HDMI sources. We feature the world's first full channel HDMI/HDCP compliant device.
|
| OHM66/88 | HDMI Matrix Router |
Select from several models that cross switch multiple HDMI or DVI inputs, with any of multiple HDMI or DVI outputs.
|
| OKVM-088 | KVM Matrix Router |
Opticis has introduced Routing and Switching capability for KVM signals in two models to select from. Easily cross switch between DVI and USB inputs and outputs, or switch among DVI, USB, and Audio.
|
| OMM-1000 | 16X16 Electrical / Optical DVI Router |
Configurable up to 16 x 16 electrical and optical input/output.
- Minimum configuration is 4 x 4.
- Support HDMI and SDI input/output as an option.
|
| OMM-2000 | Modular Multiplexer |
OMM-2000 enables you to switch up to 36 DVI sources from host computers to 36 digital displays in remote locations by using general PC software such as Hyperlink terminal (serial communication) , web browser (LAN) or Opticis’ dedicated software. |
| OPSR-2 | 19" 1RU frame for optical splitter, OPS-XYZ |
OPSR-2 can adopt two(2) units of Optical Passive Splitter, OPS-xyz.- Power is not needed. Distributes optical signal over single-mode fiber up to 16 channels without any active device or electrical power. Each unit can be used as stand-alone. |
| OSHC-01 | SDI/HDSDI to HDMI/DVI Video Converter |
HDSDI/SDI to HDMI/DVI converter, OSHC-01, converts SMPTE standard HD or HD-SDI signal to high resolution HDMI or DVI for broadcasting on air or integrating into a professional video production system. |
| OVD14/OVD18 | DVI Distributor |
Opticis new DVI Distributor, OVD 14 or OVD18 makes one(1) DVI video source split into four(4) or eight(8) DVI displays, respectively without any signal loss or digital noise. Also, HDMI source and displays are compatible by using HDMI-VI cable. |
| SDIH-200 | 3G-SDI to HDMI Converter |
Converts 3G-SDI to HDMI with embedded audio and time code. Supports SMPTE-425M,274M,296M,125 and YCbCr 4:2:2 HDMI output video format. 8/10bit resolution for greater precision and dynamic range.It also support 12S,48kHz audio input formats. |
| SDIX-100, SDIX-100C | Miniature Fiber-optic 3G-SDI Extender |
SDIX-100 extends multi-rate SDI format up to 3G-SDI (SMPTE-424M), HD-SDI (SMPTE-292M), SDI (SMPTE-259M) serial digital
video signal or DVB-ASI up to 30km at 3Gbps over one (1) ST single & multi-mode fiber. Up to 12units can be mounted in a rack, BR-300. |
You must be logged in to use the advanced filters.
Register today and be entered to win an iPad®
Now, when you register for My-iQ, you will automatically be entered for a chance to win an iPad. AV-iQ will be giving away two iPads a month to new registrants from now until InfoComm 2013 in June!
register now
Register today and be entered to win an iPad®
Now, when you register for My-iQ, you will automatically be entered for a chance to win an iPad. AV-iQ will be giving away two iPads a month to new registrants from now until InfoComm 2013 in June!
register now
