• An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
TRITECH’s core geographic territory spans Virginia to Maine. The company’s corporate headquarters, engineering and fabrication facility is located in Garden City, Long Island

Aurora Multimedia Corp.

Search within Manufacturer
manufacturer's navigation
Featured Video
Aurora Multimedia Presents NXT-350 Touch Panel
Aurora Multimedia Presents NXT-350 Touch Panel
Aurora Multimedia Corp.
Total Products: 124
Model Product Name Description
New
DXE-CAT-RX3
HDMI HDBaseT Extender with Relays & Amplifier The DXE-CAT-RX3 Series is designed to complement the Digital Xtreme Series of HDBaseT transmitters such as the DXW-2 Series HDBaseT wall plates, DXE-CAT-TX1, DXE-CAT-TX2, DXM Matrixes, etc.
AS-AMP1 40W Digital Amplifier with EQ Control AS-AMP1 is a small digital amplifier (Class D) with EQ control and MIC mixer function. It is in small enclosure but with powerful functions, including bridge connection, dual-mono, EQ control, microphone mixer, etc.
AS-CAT1-VGA VGA/YPbPr Single CAT 1000ft Extender The AS-CAT1-VGA VGA/YPbPr CAT extender with only one Cat-5/5e/6 cable lets extend VGA (at WUXGA) or 720p component video, bidirectional IR control and half-duplex serial RS-232 at same up to 330m.
ASP-44 4x4 HDMI 1.4a 3D Matrix Switcher The ASP-44 4x4 HDMI 1.3c matrix has been tested for conformance to safety regulations and requirements and has been certified for international use.
ASP-88 ASP-88 8x8 HDMI 1.4a 3D Matrix Switcher The ASP-88 8x8 HDMI 1.4a matrix has been tested for conformance to safety regulations and requirements and has been certified for international use.
ASP-CATx1RS HDMI over Single CAT6 Extender  The ASP-CATX1RS HDMI over Single CAT6 Extender with RS-232, IR, and Auto EDID learning boosts up your video/audio transmission distance up to 200ft.
ASP-CTH Composite/S-Video to HDMI Converter The ASP-CTH is a scaler/de-interlacer for converting composite video or S-Video to HDMI.
ASP-DTH DVI and Audio to HDMI Converter DVI and audio to HDMI converter provides an easy approach for converting digital video (DVI-D) and both digital audio (S/PDIF) and analog stereo audio to digital HDMI.
ASP-FIBRS2 HDMI / RS-232/ IR Fiber Extender over Single Multi-mode ASP-FIBRS2 Fiber HDMI Extender offers an easy way to extend full HD HDMI signal to 300 meters away over a duplex multi-mode fiber. The conveyed video is uncompressed to ensure the best video and audio quality. Also, transmits RS-232 Bi-directional.
ASP-HTD HDMI to DVI and Audio Converter HDMI to DVI and audio converter provides an easy and instant approach for converting digital HDMI to digital video (DVI-D) and both digital audio (S/PDIF) and analog stereo audio.
ASP-HTV HDMI/DVI to VGA/Component and Audio Converter HDMI/DVI to VGA/component and audio converter offers an easy approach for converting digital HDMI to analog PC video (VGA) and component video (YPbPr) with digital audio (S/PDIF) and analog stereo audio.
ASP-VTH VGA and Audio to HDMI Converter VGA and audio to HDMI converter offers an easy approach for converting analog PC video (VGA) with either digital audio (S/PDIF) or analog stereo audio to digital HDMI.
CA0012-1 Single IR Emitter for WACI Series Control Systems The CA0012-1 single IR emitter for use with the WACI series of control systems.
CA0012-2 Dual IR Emitter for WACI Series Control Systems The CA0012-2 dual IR emitter for use with WACI series of control systems.
CA0020-1 8-inch DVI-I to DVI-D and VGA (15-pin D-Sub) Cable Cable can be used on DIDO product which will breakout the DVI connector to DVI-D and VGA.
CA0021-1 8" DVI-I to DVI-D and RGBHV (5 female BNC)breakout cable This cable can be used on our DIDO product which will breakout the DVI connector to DVI-D and RGBHV
CA0022-1 8-inch DVI-I to DVI-D and YPbPr (3 Female RCA) Breakout Cable Cable can be used on our DIDO product which will breakout the DVI connector to DVI-D and RCA connectors.
CA0026-1 IR Receiver Extension Cable IR receiver extension cable is compatible with WACI NX and NXT controllers, and V-Tune Pro HD.
CA0052-F2T3R 3.5mm TRS to FEMALE DB9 2-TX 3 3.5mm TRS to FEMALE DB9 2-TX 3
CA0052-F3T2R 3.5mm TRS to FEMALE DB9 3-TX 2 3.5mm TRS to FEMALE DB9 3-TX 2
CA0052-M2T3R 3.5mm TRS to MALE 3.5mm TRS to MALE DB9 2-TX 3-R
CA0052-M3T2R 3.5mm TRS to MALE DB9 3-TX 2-R 3.5mm TRS to MALE DB9 3-TX 2-R
CA0054-1 8" VGA to 4 RCA Adaptor cable (YPbPr and Composite Video) 8" VGA to 4 RCA Adaptor cable (YPbPr and Composite Video)
DIDO Jr. Real-time Image Rotation Videowall Processor / Scaler DIDO Jr. is the ideal video wall processor and video image rotation engine. Integrators can design video walls with up to 64 monitors and the monitors can even be mounted in portrait position. DIDO Jr's image quality is visibly superior to much more exp
DIDO Loop Kit DIDO Loop Kit for Controlling Multiple DIDO and V-tune Pro Dido loop kit is for controlling multiple units of DIDO and V-tune pro.
DIDO LT. Video Wall Processor / Scaler With DIDO LT, integrators can design video walls utilizing up to 64 monitors that display exceptional picture quality. On-screen display menus make the processor a breeze to set up.
DIDO Pro Quad View/Multi-image Rotation High-resolution Scaler The DIDO Pro high-resolution scaler/video processor with multi-image rotation and quad view.
DRK-002 Rack mount / two units in 1RU for NX-22 Rack mount / two units in 1RU for NX-22
DRK-1 Dual 1RU Rack Mount Kit Dual 1RU rack mount kit for DIDO Pro, DIDO Jr., DIDO LT processor.
DTB-1010-BK/EB/UF Desktop Box for NXT-1010 / NXT-1010V (NXT Sold Separately) Desktop Box for NXT-1010 / NXT-1010V (NXT Sold Separately)
DTB-1330-BK/EB/UF Desktop Box for NXT-1330 / NXT-1330V (NXT Sold Separately) Desktop Box for NXT-1330 / NXT-1330V (NXT Sold Separately)
DTB-350-BK/EB/UF Desktop Box for NXT-350 (NXT Sold Separately) (Black Satin, Ebony Satin, Unfinished) Desktop Box for NXT-350 (NXT Sold Separately) (Black Satin, Ebony Satin, Unfinished)
DTB-470-BK/EB/UF Desktop Box for NXT-470 (NXT Sold Separately) (Black Satin, Ebony Satin, Unfinished) Desktop Box for NXT-470 (NXT Sold Separately) (Black Satin, Ebony Satin, Unfinished)
DTB-700-BK/EB/UF Desktop Box for NXT-700 / NXT-700V (NXT Sold Separately) Desktop Box for NXT-700 / NXT-700V (NXT Sold Separately)
DXC-BLANK-G2 Blank Panel for DXM-G2 Cage Blank Panel for DXM-G2 Cage
DXCI-4-2S2H-G2 Dual SDI / dual HDMI Input Card The DXCI-4-2S2H-G2 dual SDI / dual HDMI Input Card is designed to work with the DXM G2 Series card cages.
DXCI-4-2V2H-G2 Dual VGA / dual HDMI Input Card The DXCI-4-2V2H-G2 dual VGA / dual HDMI Input Card is designed to work with the DXM G2 Series card cages. Each input can store a unique EDID if required. The VGA portion is converted from analog to digital in its native resolution.
DXCI-4-DVI-G2 4 Input DVI HDCP & Auto Eq for 30m Cable Support Digital Xtreme Matrix Card 4 Input DVI HDCP & Auto Eq for 30m Cable Support Digital Xtreme Matrix Card
DXCI-4-FIBR3-G2 DXCI-4-FIBR3-G2 Input Card The DXCI-4-FIBR3-G2 Input Card is designed to work with the DXM G2 Series card cages
DXCI-4-HDBT1-G2 HDBaseT 230' CAT Input Card The DXCI-4-HDBT2-G2 HDBaseT CAT Input Card is designed to work with the DXM G2 Series card cages. Each input can receive up to 230' away from the source. Also, each port can supply up to 10 watts of power to the remote device and RS-232 control.
DXCI-4-HDBT2E-G2 HDBaseT 600' CAT Input Card The DXCI-4-HDBT2-G2 HDBaseT CAT Input Card is designed to work with the DXM G2 Series card cages. Each input can receive up to 600' away from the source. Also, each port can supply up to 10 watts of power to the remote device and RS-232 control.
DXCI-4-HDMI-G2 HDMI Input Card The DXCI-4-HDMI-G2 HDMI Input Card is designed to work with the DXM G2 Series card cages. Each input can store a unique EDID if required.
DXCI-4-LHDMI-G2 4 Input HDMI (w/Expansion Loop thru HDMI) Digital Xtreme Matrix Card 4 Input HDMI (w/Expansion Loop thru HDMI) Digital Xtreme Matrix Card
DXCI-4-SDI-G2 4 input 3G/HD/SD SDI card with loop outs The DXCI-4-SDI-G2 is a 4 input 3G/HD/SD SDI card with loop outs for the DXM card frames.
DXCI-4-VGA-G2 VGA Input Card The DXCI-4-VGA-G2 VGA Input Card is designed to work with the DXM G2 Series card cages.
DXCI-4-YPBPR-G2 4 Input YPbPr Component Video Digital Extreme Matrix Card (ships with CA0058-1 Audio Insertion Cable) 4 Input YPbPr Component Video Digital Extreme Matrix Card (ships with CA0058-1 Audio Insertion Cable)
DXCO-4-2S2H-G2 4 Output Total (2 SDI / 2 HDMI) Digital Xtreme Matrix Card 4 Output Total (2 SDI / 2 HDMI) Digital Xtreme Matrix Card
DXCO-4-2V2H-G2 4 Output Total (2 VGA / 2 HDMI]) Digital Xtreme Matrix Card 4 Output Total (2 VGA / 2 HDMI]) Digital Xtreme Matrix Card
DXCO-4-DVI-G2 4 Output DVI / HDCP Digital Xtreme Matrix Card 4 Output DVI / HDCP Digital Xtreme Matrix Card
DXCO-4-FIBR3-G2 DXCO-4-FIBR3-G2 Output Card The DXCO-4-FIBR3-G2 Output Card is designed to work with the DXM G2 Series card cages.
DXCO-4-HDBT1-G2 HDBaseT 230' CAT Output Card The DXCO-4-HDBT1-G2 HDBaseT CAT output Card is designed to work with the DXM G2 Series card cages. Each output can transmit up to 230' away from the source. Also, each port can supply up to 10 watts of power to the remote device and RS-232 control.
DXCO-4-HDMI-G2 HDMI Output Card The DXCO-4-HDMI-G2 HDMI Output Card is designed to work with the DXM G2 Series card cages. The audio is automatically de-embedded into 2 channel analog audio via 3.5mm TRS.
DXCO-4-SDVI-G2 1080P DVI Digital Xtreme Matrix Card Description: The DXCO-4-SDVI-G2 output card offers seamless switching of DVI signals with up to 1080P resolution for the DXM G2 series. These cards are compatible with all 2nd Generation Digital Xtreme Matrix Card Cages.
DXCO-4-VGA-G2 4 Output VGA Digital Extreme Matrix Card 4 Output VGA Digital Extreme Matrix Card
DXE-CAT-RK3 3RU Rack for DXE Extenders DXE-CAT-RK3 to fit up to 16 DXE extenders in a 3RU rack space. With all connectors on the rear of the DXE unit, this allows for a clean, organized rack installation.
DXE-CAT-RK3BL Blank Panels for DXE-CAT-RK3 Rack Mount Blank Panels for DXE-CAT-RK3 Rack Mount
DXE-CAT-RX1 HDBaseT CAT extender The DXE-CAT-RX1 is part of Aurora's expanding Digital Xtreme Series, and one of the new HDBaseT CAT extenders. 
DXE-CAT-RX2 HDBaseT CAT extenders DXE-CAT-RX2's powerful design provides usability and features not found anywhere else. Single-sided connections for LAN, HDMI, Control and Power provide a cleaner wiring and rack mounting solution.
DXE-CAT-S1 HDMI HDBaseT CAT 70m Extender The DXE-CAT-S1 HDMI HDBaseT CAT 70m extender is one of new HDBaseT CAT extenders and powerful design provides usability and features not found anywhere else.
DXE-CAT-S2 HDBaseT CAT extender The DXE-CAT-S2's powerful design provides usability and features not found anywhere else. Single-sided connections for LAN, HDMI, Control and Power provide a cleaner wiring and rack mounting solution.
DXE-CAT-TX1 HDBaseT CAT extenders Single-sided connections for HDMI, Control and Power provide a cleaner wiring and rack mounting solution.
DXE-CAT-TX2 HDBaseT CAT extender The DXE-CAT-TX2 can go up to 330ft 1080p 60Hz 48bit color depth with bi-directional RS-232, IR, & LAN (up to 600ft with CAT 6a shielded cable at 24bit color depth).
DXE-FIBR-S3 DVI Dual Multi-mode (300m) / Single-mode (2km) Fiber Transmitter and Receiver Set DVI Dual Multi-mode (300m) / Single-mode (2km) Fiber Transmitter and Receiver Set
DXE-HTS HDMI to 3G/HD/SD-SDI Converter The DXE-HTS is a professional broadcast video converter capable of converting HDMI to 3G-SDI, HD-SDI, or SD-SDI. This allows viewing of industry standard consumer and commercial HDMI video components such as video players, computers.
DXE-STH broadcast video converter The DXE-STH is a professional broadcast video product capable of converting 3G-SDI, HD-SDI, & SD-SDI signals to HDMI.
DXE-USB-D1 USB 2.0 480Mb 230' CAT Extender Receiver(Destination Side) for DXE-USB-H1 USB 2.0 480Mb 230' CAT Extender Receiver(Destination Side) for DXE-USB-H1
DXE-USB-H1 USB 2.0 480Mb 230' CAT Extender Transmitter (Computer/Host Side) for DXW-2EU USB 2.0 480Mb 230' CAT Extender Transmitter (Computer/Host Side) for DXW-2EU
DXE-USB-S1 230' USB 2.0 480Mb CATx Extender Kit (Incl. USB Tx/Rx & PS) 230' USB 2.0 480Mb CATx Extender Kit (Incl. USB Tx/Rx & PS)
DXI Programmer IP Control Software Digital Xtreme Interface (DXI) Software allows you to easily program your DXB-8 and DXW-2 series wall plates to control your connected devices via RS-232.
DXM-1616-G2 Digital Xtreme 2nd Generation 16x16 Card-Based HD Video Matrix Aurora's 2nd generation Digital Xtreme Matrix (DXM) switchers now with HDBaseT CAT I/O cards offering 1080P 60Hz transmission over single CAT cable up to 600ft. All units with auto EDID learning and management for ease of setup.
DXM-3232-G2 Digital Xtreme 2nd Generation 32x32 Card-Based HD Video Matrix Aurora's 2nd generation Digital Xtreme Matrix (DXM) switchers now with HDBaseT CAT I/O cards offering 1080P 60Hz transmission over single CAT cable up to 600ft. All units with auto EDID learning and management for ease of setup.
DXM-88-G2 Digital Xtreme 2nd Generation 8x8 Card-Based HD Video Matrix Aurora's 2nd generation Digital Xtreme Matrix (DXM) switchers now with HDBaseT CAT I/O cards offering 1080P 60Hz transmission over single CAT cable up to 600ft. All units with auto EDID learning and management for ease of setup.
DXM-PWR-G2 DXM Power Supply for 16x16 and 32x32 DXM Power Supply for 16x16 and 32x32
DXW-2-S1-B 2 Input HDBaseT Wall Plate (VGA & HDMI) - 230" CAT Extender 2 Input HDBaseT Wall Plate (VGA & HDMI) - 230" CAT Extender
DXW-2E-B 2 Input HDBaseT Wall Plate (VGA, HDMI, & LAN) - 330'/600' CAT Extender 2 Input HDBaseT Wall Plate (VGA, HDMI, & LAN) - 330'/600' CAT Extender
DXW-2E-S2-B 2 Input HDBaseT Wall Plate (VGA, HDMI, & LAN) - 330'/600' CAT Extender 2 Input HDBaseT Wall Plate (VGA, HDMI, & LAN) - 330'/600' CAT Extender
DXW-2E-S3-A-B 2 Input HDBaseT Wall Plate (VGA, HDMI w/LAN) - 330'/600' CAT Extender w/Amp 2 Input HDBaseT Wall Plate (VGA, HDMI w/LAN) - 330'/600' CAT Extender w/Amp
DXW-2EU-B 2 Input HDBaseT Wall Plate (VGA, HDMI, LAN, USB 2.0) - 330'/600' HDMI & 280' USB 2.0 Ext 2 Input HDBaseT Wall Plate (VGA, HDMI, LAN, USB 2.0) - 330'/600' HDMI & 280' USB 2.0 Ext
DXW-2EU-S2-B/W 2 Input HDBaseT Wall Plate (VGA, HDMI, LAN, USB 2.0) - 330'/600' HDMI & 230' USB 2.0 Ext 2 Input HDBaseT Wall Plate (VGA, HDMI, LAN, USB 2.0) - 330'/600' HDMI & 230' USB 2.0 Ext
IBZ-1502 15-inch Diagonal Wired Color Touch Panel The IBZ-1502 is an ultra-large and brilliant 15-inch TFT XGA display with integrated touch and ultra long life LCD.
IRC-13 Replacement Handheld IR Control For VTune Pro Replacement Handheld IR Control For VTune Pro
IRC-14 Replacement Handheld IR Control For DIDO Replacement Handheld IR Control For DIDO
IRK-321 19" / 3-RU 2-Gang 1-Device / Rack-mount kit (for LXB-200, NXT-350, PAD12L) 19" / 3-RU 2-Gang 1-Device / Rack-mount kit (for LXB-200, NXT-350, PAD12L)
IRK-331 19" / 3-RU 3-Gang 1-Device / Rack-mount kit (for NXT-470) 19" / 3-RU 3-Gang 1-Device / Rack-mount kit (for NXT-470)
LVR-2G 2 Gang Low Voltage Mounting Bracket 2 Gang Low Voltage Mounting Bracket
LVR-3G 3 Gang Low Voltage Mounting Bracket 3 Gang Low Voltage Mounting Bracket
LXC-200 Single POE Powered Housing for Room-based Expansion The new LXC-200 combines all of nugget units in a single POE powered housing for room-based expansion including 3-serial, 2-IR/RS232, 2-relay and IO port for complete room expansion.
NRK-1010 19" / 6 RU Rack-mount kit for NXT-1010/1010V 19" / 6 RU Rack-mount kit for NXT-1010/1010V
NRK-700 19" / 4 RU Rack-mount kit for NXT-700/700V 19" / 4 RU Rack-mount kit for NXT-700/700V
Nugget I/O IP to I/O Remote Access Controller with Internal Web Server WACI Nugget I/O is a fully functional stand-alone IP to I/O remote access controller with internal web server. In addition, it functions as a remote expansion port for the WACI series of IP-based control systems.
Nugget IR IP to IR Remote Access Controller with Internal Web Server WACI Nugget IR is a fully functional stand-alone IP to IR remote access controller with internal web server. In addition, it functions as a remote expansion port for the WACI series of IP-based control systems.
Nugget Relay IP to Relay Remote Access Controller with Internal Web Server WACI Nugget Relay is a fully functional stand-alone IP to relay remote access controller with internal web server. In addition, it functions as a remote expansion port for the WACI series of IP-based control systems.
Nugget Serial IP to Serial Remote Access Controller with Internal Web Server WACI Nugget Serial is a fully functional stand-alone IP to serial remote access controller with internal web server. In addition, it functions as a remote expansion port for the WACI series of IP-based control systems.
NX+ 2-Serial, 4-IR, 4-Relay, 4-DSP (Includes CA0012-1 x 2) 2-Serial, 4-IR, 4-Relay, 4-DSP (Includes CA0012-1 x 2)
NX+ E1 7-Serial, 8-IR, 8-Relay, 8-DSP (Includes CA0012-1 x 2) 7-Serial, 8-IR, 8-Relay, 8-DSP (Includes CA0012-1 x 2)
NX+ E2 12-Serial, 12-IR, 12-Relay, 12-DSP (Includes CA0012-1 x 2) 12-Serial, 12-IR, 12-Relay, 12-DSP (Includes CA0012-1 x 2)
NX-PAND Port Expansion for WACI NX Control System NX-PAND allows the WACI NX+ or NX Jr. to control additional ports by simply connecting to its parent WACI NX.
NXT-1010-B 10.1" In-Wall Touch Panel with Integrated Control Ports with Black Aluminum Bezel The NXT-1010 integrates a control system processor with multiple ports into a web based touch screen control.
NXT-1010V-B 10.1" In-Wall Touch Panel with Integrated Control Ports, Video Preview and Black Aluminum Bezel Aurora Multimedia introduces the new hybrid NXT-1010V 10.1" touch panel in-wall controller with full video preview capabilities.
NXT-1330-B 13.3" In-Wall Touch Panel with Integrated Control Ports with Black Aluminum Bezel Aurora Multimedia introduces the new hybrid NXT-1330 13.3" touch panel in-wall controller. The NXT-1330 is a revolutionary development that integrates a control system processor with multiple ports into a Web-based touch screen controller.
NXT-1330V-B 13.3" In-Wall Touch Panel with Integrated Control Ports, Video Preview and Black Aluminum Bezel Aurora Multimedia introduces the new hybrid NXT-1330V 10.1" touch panel in-wall controller with full video preview capabilities. The NXT-1330V is a revolutionary development that integrates a control system processor with multiple ports.
NXT-700-B 7.0" In-Wall Touch Panel with Integrated Control Ports with Black Aluminum Bezel The NXT-700 integrates a control system processor with multiple ports into a web based touch screen controller.
NXT-700V-B 7" touch panel in-wall controller with full video preview  Aurora Multimedia introduces the new hybrid NXT-700V 7" touch panel in-wall controller with full video preview capabilities. 
PS0029-1 V-Tune Pro HD Replacement Power Supply (12vDC 2A) V-Tune Pro HD Replacement Power Supply (12vDC 2A)
PS0053-1 24VDC PS w/US Adaptor (DXE-CAT & DXW) 24VDC PS w/US Adaptor (DXE-CAT & DXW)
SKR-22T Flat 2' x2' Ceiling Tile 20 Watt Speaker This light weight speaker delivers clear sound with fidelity not normally found on typical ceiling speakers.
SRK-002 Rack mount / single unit in 1RU for NX-22 Rack mount / single unit in 1RU for NX-22
SRK-1 Single Rack Mount Kit (Dido Pro/Jr/LT) Single Rack Mount Kit (Dido Pro/Jr/LT)
T.R.A.C.S. IP Control Software TRACS is a software tool written by Aurora Multimedia that allows monitoring of all classrooms in an entire school and/or district(s) and makes it possible for remote control, scheduling, reports, and alerts.
TRACS Node-3P Node License for T.R.A.C.S. non-Aurora controlled device (3rd Party device) Node License for T.R.A.C.S. non-Aurora controlled device (3rd Party device)
TRACS Node-A Node License for T.R.A.C.S. controlled device (Aurora device/controller) Node License for T.R.A.C.S. controlled device (Aurora device/controller)
UMT-2 Right Angle Bracket for WACI NX+ and WACI NX Jr. This UMT-2 is a right angle bracket for WACI NX+ and WACI NX Jr..
VTune Pro HD Tuner for NTSC/ATSC/QAM/IPTV/HDTV The VTune Pro HD tuner delivers total tuning solution for any integrated system, whether it requires legacy NTSC tuning or ATSC/QAM capability.
WACI-LINK PC Control Software (Allows remote control of PC functions via IP) PC Control Software (Allows remote control of PC functions via IP)
WMB-1010 NXT-1010/NXT-1010V mounting The WMB-1010 allows for wall mounting of the NXT-1010/NXT-1010V.
WMB-1330 NXT-1330/NXT-1330V Mounting The WMB-1330 allows for wall mounting of the NXT-1330/NXT-1330V.
WMB-700 Wall/Podium Mount for NXT-700/NXT-700V The WMB-700 is a wall/podium mount allows for wall mounting of NXT-700/NXT-700V.
WOWE WACI Offline WEM Editor Software WOWE provides free WACI offline WEM editor application for use with the WACI NX series of control systems.
WPAD-12L 12 Button Dynamic Control Interface (LCD) 12 Button Dynamic Control Interface (LCD)
WPAD-12LRM 12 Button Dynamic Control Interface (LCD) 12 Button Dynamic Control Interface (LCD)
WPAD-6L 6 Button Dynamic Control Interface (LCD) 6 Button Dynamic Control Interface (LCD)
WRK-1 4RU Rackmount for WACI NX and WACI-PAD Controllers WRK-1 is a 4RU rack mounting solution for the WACI NX series of IP control systems and the WACI-PAD LCD button controllers.
WRK-12 19" / 4RU Rack-mount kit with PAD-12 plate 19" / 4RU Rack-mount kit with PAD-12 plate
WRK-6 19" / 4RU Rack-mount kit with PAD-6 plate 19" / 4RU Rack-mount kit with PAD-6 plate
You must be logged in to use the advanced filters.
Register today!
With a free My-iQ account, you'll be able to keep track of the latest updates, event notifications and promotions from your favorite AV manufacturers, manage your own projects and discover new pro-AV products.
register now
AV-iQ Copyright 2014 - Terms and Conditions