| Category |
Model |
Description |
| Control Systems and Networking |
IPAC-GL1 |
The Crestron IPAC is a 2-Series control processor designed for wall mount installation. |
| Cables Connectors and Accessories |
QM-WMC-VCC |
A 2-gang wall mount multimedia interface, providing selectable inputs for video and computer sources with audio. QuickMedia transport allows distribution of WUXGA signals up to 450 feet over a single QuickMedia cable. |
| Control Systems and Networking |
TPMC-3X |
Isys i/O® 2.8" Handheld WiFi Touchpanel |
| Control Systems and Networking |
Crestron Control™ |
Imagine using your iPhone as a remote for your Adagio® home entertainment system, or to control all the lights in your home. |
| Control Systems and Networking |
QM-RX1-2G |
A low-profile surface mount QuickMedia Receiver with built-in diplay control, audio DSP, and stereo amplifier. |
| Control Systems and Networking |
TPMC-4SM |
Introducing the first Crestron touchpanel to work directly with our RoomView® Server Edition room management software. |
| See All New Products |
| Subcategory |
Model |
Description |
| Receivers and Tuners |
ABAR-1 |
The ABAR-1 is an active balanced-to-unbalanced audio converter designed to enable the connection of any Crestron Home® CAT5 Balanced Audio source to a conventional unbalanced stereo line-level input. |
| Receivers and Tuners |
ATC-AMFM2 |
ATC-Series tuner cards are designed for use with Adagio systems that feature tuner card slots. The ATC-AMFM2 provides two (2) fully independent AM/FM tuners on a single card. |
| Receivers and Tuners |
ATC-AMFMSR |
ATC-Series tuner cards are designed for use with Adagio systems that feature tuner card slots. On a single card, the ATC-AMFMSR provides one (1) AM/FM tuner and one (1) SIRIUS Satellite Radio tuner. |
| Receivers and Tuners |
ATC-AMFMSRD |
AM/FM and SIRIUS® Satellite Radio Tuner Card w/Digital Output |
| Receivers and Tuners |
ATC-AMFMXM |
ATC-Series tuner cards are designed for use with Adagio systems that feature tuner card slots. On a single card, the ATC-AMFMXM provides one (1) AM/FM tuner and one (1) XM Satellite Radio tuner. |
| Subcategory |
Model |
Description |
| Audio Conferencing - Accessories and Ancillary Products |
CEN-TIA |
The CEN-TIA provides a telephone audio and control interface with useful features for home automation, multiroom audio distribution, and other control system applications. |
| Audio Conferencing -Systems and Components |
IM-WCC-M |
The IM-WCC-M is an iMedia (IM) transmitter designed to install in a standard 2-gang electrical box, providing RGB and stereo audio inputs for connection to the output of a computer source. |
| Subcategory |
Model |
Description |
| MIDI Controllers, Keyboards, Samplers and Synthesizers |
C2N-IIF |
The C2N-IIF is designed to mate directly with Holovision* brass plates including camera and keyless entry versions using the C2N-IIF-SPMK kit. |
| Subcategory |
Model |
Description |
| VGA, Communication and Data Cable and Assemblies |
C2N-TXM-C50 |
The C2N-TXM-C50 is a 50-foot indoor/outdoor extension cable used to extend the length of the cable for the high-gain antenna provided with the C2N-TXM XM Satellite Radio tuner and Adagio XM Satellite Radio products. |
| Connectors and Adaptors |
CLT-1DELV4 |
The CLT terminal blocks are designed to install in CAEN automation enclosures to facilitate the termination of Class 1 high-voltage wiring for each CLX-Series lighting control module. |
| Connectors and Adaptors |
CLT-1DIM4 |
The CLT terminal blocks are designed to install in CAEN automation enclosures to facilitate the termination of Class 1 high-voltage wiring for each CLX-Series lighting control module. |
| Connectors and Adaptors |
CLT-1DIM8 |
The CLT terminal blocks are designed to install in CAEN automation enclosures to facilitate the termination of Class 1 high-voltage wiring for each CLX-Series lighting control module. |
| Connectors and Adaptors |
CLT-1FAN4 |
The CLT terminal blocks are designed to install in CAEN automation enclosures to facilitate the termination of Class 1 high-voltage wiring for each CLX-Series lighting control module. |
| Subcategory |
Model |
Description |
| Camera LCD Monitors, Mounts and Kits (On-Board) |
C2N-CAMI-CMT |
The C2N-CAMI-CMT is a ceiling mount accessory for the C2N-CAMIDSPT Digital Servo Pan/Tilt Head. |
| Camera Enclosures |
C2N-CAMI-WMT |
The C2N-CAMI-WMT is a wall mount accessory for the C2N-CAMIDSPT Digital Servo Pan/Tilt Head. |
| Subcategory |
Model |
Description |
| Pan Tilt Zoom and Networked |
C2N-CAMIDJ |
The C2N-CAMIDJ is a professional joystick controller designed to provide a powerful yet simple user interface for the remote operation of networked cameras and lenses. |
| Pan Tilt Zoom and Networked |
C2N-CAMIDSPT |
The C2N-CAMIDSPT is a camera pan/tilt head offering ultra fast, quiet and precise camera and lens control for videoconferencing, recording, distance learning, in-house television, and live video applications. |
| Subcategory |
Model |
Description |
| Boards and Cards - Data |
C2IR-8 |
The C2IR-8 installs in any Y-Bus expansion slot of a 2-Series control system to provide eight ports for infrared (IR) or 1-way serial communication and control. |
| Boards and Cards - Video |
C2N-MMS-SC |
The C2N-MMS-SC is an optional internal scan converter card for the C2N-MMS Video/RGB switcher. |
| Boards and Cards - Data |
CPU2 |
The CPU2 is the central processor unit for use in the RACK2 control system. It performs the execution of the SIMPL and SIMPL+ Windows® programs as well as managing the Cresnet network and the expansion cards installed in the control system. |
| Software |
D3PRO |
Crestron D3 Pro software offers design, development, and documentation for a complete residential lighting system, with additional support for auxiliary devices such as security systems, motion detectors and shades. |
| Boards and Cards - Video |
DHDC-BNCVID |
BNC/BNC Video Input Card for DVPHD |
| Subcategory |
Model |
Description |
| Media Control |
1700C-BTNB |
The 1700C-BTNB is a replacement set of (10) black engravable buttons for any 1700 model SmarTouch™ touchpanel that is already equipped with the button bezel kit. Engraving is included. |
| Media Control |
1700C-BTNB-BEZELS |
The 1700C-BTNB-BEZELS is a button bezel kit used to add ten pushbuttons to any 1700 model SmarTouch touchpanel. Includes (10) black engravable pushbuttons, (2) membrane switches, and front bezel with button holes. |
| Media Control |
1700C-BTNS |
The 1700C-BTNS is a replacement set of (10) silver engravable buttons for any 1700 model SmarTouch touchpanel that is already equipped with the button bezel kit. Engraving is included. |
| Media Control |
1700C-BTNS-BEZELS |
The 1700C-BTNS-BEZELS is a button bezel kit used to add ten pushbuttons to any 1700 model SmarTouch touchpanel. Includes (10) silver engravable pushbuttons, (2) membrane switches, and front bezel with button holes. |
| Media Control |
AADS |
The Adagio Audio Distribution System (AADS) delivers a complete, low-cost solution for high-performance multi-room audio distribution. |
| Subcategory |
Model |
Description |
| Servers, Media Players & Appliances |
C2N-DVP4DI |
The C2N-DVP4DI is an advanced multi-window digital video processor and touchpanel interface. |
| Subcategory |
Model |
Description |
| Multi-Imaging Control Room |
APAD |
The APAD wall mount LCD controller provides an elegant yet cost-effective room control solution for Crestron's Adagio® home entertainment systems, MPS systems, or any control system application requiring a user interface. |
| Data and Graphic Display Monitors |
DTT-15V3 |
The DTT-15V3 is a 15" touchpanel designed for use with the UPX-2 Universal Presentation System to support all of the control capabilities of a Crestron touchpanel. |
| Touchscreens |
DTT-17V3 |
The DTT-17V3 is a 17" touchpanel designed for use with the UPX-2 Universal Presentation System to support all of the control capabilities of a Crestron touchpanel, plus pen-based annotation and computer-based multimedia presentation. |
| Subcategory |
Model |
Description |
| Audio and Video Furniture - Carts and Cabinets |
GLEP |
Green Light Power Switching Cabinet |
| Subcategory |
Model |
Description |
| Lighting Control, Consoles, Dimmers, Panels and Related Products |
CAEN |
The CAEN Series automation enclosures are designed to house Crestron's CLX-Series lighting control modules and PAC2 or PAC2M control systems. |
| Ancillary Studio Equipment and Supplies |
CAEN-BLOCK |
The CAEN-BLOCK is a Cresnet terminal block designed specifically for Crestron lighting and automation systems to link extension enclosures and satellite enclosures to the central PAC2 or PAC2M control system. |
| Lighting Control, Consoles, Dimmers, Panels and Related Products |
CAEN-CK |
CAEN-CK Cover Kits are designed to extend the depth of Crestron's CAEN and CAENIB Automation Enclosures, affording 1.5 inch (3.81 cm) additional depth to accommodate excess wiring and third-party devices. |
| Lighting Fixtures, Kits and Studio Systems |
CAEN-MK |
The CAEN-MK is the mounting kit required to mount (1) C2N-SPWS300 Cresnet power supply or (1) C2N-NPA8 Cresnet network poll accelerator into a CAEN or CAENIB automation enclosure. |
| Ancillary Studio Equipment and Supplies |
CAEN-UMP |
The CAEN-UMP Series is a line of four universal mounting plates designed to allow non-CLX Crestron lighting modules and third-party devices to be mounted within a CAEN or CAENIB automation enclosure. |
| Subcategory |
Model |
Description |
| Mounting System - Accessories and Ancillary Products |
B-G1-FPAR |
1-Gang Architectural Faceplates for CNX-B Keypads |
| Mounting System - Accessories and Ancillary Products |
BB-6L |
The BB-6L back box provides a recess-mounted steel enclosure for the Isys TPS-6L wall mount touchpanel. |
| Mounting System - Accessories and Ancillary Products |
BB-8L |
The BB-8L back box provides a recess-mounted steel enclosure for the Isys i/O TPMC-8L wall mount touchpanel media center. |
| Mounting System - Accessories and Ancillary Products |
C2N-CAMI-CMT |
The C2N-CAMI-CMT is a ceiling mount accessory for the C2N-CAMIDSPT Digital Servo Pan/Tilt Head. |
| Mounting System - Accessories and Ancillary Products |
C2N-CBD-TS |
Crestron Cameo presents a fresh, innovative concept in keypad design featuring an elegant appearance with versatile button configurations. |
| Subcategory |
Model |
Description |
| Uninterruptable Power Supplies - Battery Backups |
C2N-SPWS300 |
To support the myriad touchpanels, keypads, and other peripherals that make up a control system, the C2N-SPWS300 provides a convenient and compact centralized power and termination solution. |
| Uninterruptable Power Supplies - Battery Backups |
CEN-UPS1250 |
The CEN-UPS1250 is a 1250 Watt, 120 Volt uninterruptible power supply and power conditioner Engineered by APC® specifically for Crestron. |
| Electrical Distribution, Accessories and Ancillary Products |
CNCS |
The CNCS provides power sensing of any single AC powered device or AC load up to 5 Amps. |
| Uninterruptable Power Supplies - Battery Backups |
CNPWS-75 |
The CNPWS-75 is a 75 Watt, 24 Volt regulated power supply for powering Cresnet control systems and devices. |
| Electrical Distribution, Accessories and Ancillary Products |
CNXRMCS |
The CNXRMCS is designed as an accessory for Crestron room solution boxes to provide power sensing of a single CRT-type television or similar high-current electronic device. |
| Subcategory |
Model |
Description |
| Racks and Rack Frames |
C2N-RMAK |
The C2N-RMAK is a 3-space 19-inch rack mount kit for the C2N-SPWS300 300 Watt Power Supply or C2N-NPA8 Network Poll Accelerator. |
| Racks and Rack Frames |
CEN-TRACK |
The CEN-TRACK is a modular multi-tuner capable of providing up to 6 independent radio tuners for use in a Crestron multi-room audio distribution system. |
| Racks and Rack Frames |
CNXRMAK |
The CNXRMAK is a 2-space rack mount kit that is used to install up to three Crestron C2N-HBLOCK Cresnet distribution blocks or three CNPWS-75 Cresnet power supplies into a 19" EIA equipment rack. |
| Racks and Rack Frames |
RMK-3U |
The RMK-3U is a 3-space 19" rack mount shelf designed to provide a universal rack-mounting solution for all kinds of components and devices, with features included to accommodate the Adagio AAS Audio Server. |
| Racks and Rack Frames |
RMK-4U |
The RMK-4U is a 4-space 19" rack mount shelf designed to provide a universal rack-mounting solution for all kinds of components and devices, with features included to accommodate the Adagio AADS, AADS-XM, and AAE. |
| Subcategory |
Model |
Description |
| Digital Media Players |
ADC-200BR |
200-disc Blu-ray Changer |
| Digital Asset Management Systems |
ADMS-BR |
The new Adagio Digital Media System (ADMS-BR) from Crestron brings all your digital media together into one brilliant solution incorporating a high-definition multimedia server, online streaming media player, Blu-ray Disc player, and Web browser. |
| Subcategory |
Model |
Description |
| Storage - CD, DVD, Optical Disks, and Removable Drives |
CEN-NAS-4TB |
4TB Network Attached Storage |
| Storage Media - memory cards, readers and writers |
UPX-OS4GB-MSO-2007 |
The UPX-OS4GB-MSO-2007 is a 4 GB Flash memory and firmware upgrade for older UPX-2, UPX-2-1GB, and UPX-2-MSO models having 1 GB or smaller compact flash. |
| Subcategory |
Model |
Description |
| Converters, Scalers and Switchers |
DM-MD8X8 |
Crestron DM Switchers provide the foundation for a complete DigitalMedia system, delivering an advanced, true high-definition multi-room AV signal routing solution that’s extremely flexible and installer-friendly. |
| Audio |
BIPAD8-AMPX-12X60_PAK |
The CNAMPX-12X60 and CNX-BIPAD8 are designed to work together to deliver audio sound quality, reliability, and "control-ability." The BIPAD8-AMPX-12X60 PAK makes these two components available together at a low cost. |
| Audio |
BIPAD8-AMPX-16X60_PAK |
The CNAMPX-16X60 and CNX-BIPAD8 are designed to work together to deliver audio sound quality, reliability, and "control-ability." The BIPAD8-AMPX-16X60 PAK makes these two components available together at a low cost. |
| Distribution Amplifiers |
C2E-AUDIO-PAK |
The C2-AUDIO-PAK is a basic 8-zone audio distribution package. Its control system, amplifier and audio distribution process or are the ideal starting point for a wide variety of residential and commercial applications. |
| Routing and Matrix Switchers |
C2N-MMS |
The C2N-MMS is a professional video and RGB matrix switcher designed to expand the switching capabilities of Crestron's MP2 and MP2E integrated AV control systems. |
| Subcategory |
Model |
Description |
| Streaming Media |
CEN-NVS100 |
The CEN-NVS100 is the perfect accessory for every Crestron connected home, school, or business, providing a simple solution for streaming video from any camera to touchpanels throughout the facility. |
| Subcategory |
Model |
Description |
| Test Equipment - General or Systemic |
C2N-ANLZ |
The C2N-ANLZ Cresnet Analyzer is a powerful diagnostic tool for troubleshooting Crestron system installations and programming issues. |
| Test Equipment - Audio |
CSSTK |
The CSSTK provides the hardware necessary for performing audio equalization of surround sound systems using the Adagio® Media System (AMS or AMS-AIP) with Audyssey MultEQ®XT technology. |
| Test Equipment - Meters, Monitors and Measurement |
GLS-PLS-120/277 |
The GLS-PLS-120/277 is a 3-Phase Power Loss Sensor designed for use with Crestron Green Light™ systems to activate Override mode during a power failure. |
| Test Equipment - Meters, Monitors and Measurement |
MM-HTDR |
The Crestron MM-HTDR MediaManifold™ Cable Analyzer is a portable handheld device used to determine the length and integrity of RG6 cable runs. |
| Test Equipment - Video |
SW-TB |
Crestron Toolbox is a broad-based mechanism that performs numerous system tasks, such as logging system data and error messages, setting network IDs, uploading programs and device firmware and more. |