| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
MK/GL |
Guitar/instrument cable for use with AKG wireless systems |
| Audio Cables, Snakes, and Assemblies |
CS MK 1.25 fm |
Connecting cable for CS 2 microphone stations |
| Audio Cables, Snakes, and Assemblies |
CS MK 10 fm |
Connecting cable for CS 2 microphone stations |
| Audio Cables, Snakes, and Assemblies |
CS MK 2.5 fm |
Connecting cable for CS 2 microphone stations |
| Audio Cables, Snakes, and Assemblies |
CS MK 20 fm |
Connecting cable for CS 2 microphone stations |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
AC300-124 |
AC300-124 is 50 pcs package of splice connectors capable of electrically connecting a (tap) wire to a through (run) wire and insulate the connection. Self Stripping electrical tap connectors accommodate 22-16 AWG Solid or stranded, tinned or untinned copper conductors. Recommended for use with common thermoplastic insulated wires such as: T, TF, TFF, TFN, TFFN, AWM, TEW, SAE-GPT with a maximum insulation diameter of 0.12 inches (3,0 mm). Maximum recommended current for general purpose applications: 22 AWG - 3 AMPS, 20 AWG - 4 AMPS, 18 AWG - 7 AMPS, 16 AWG - 10 AMPS. |
| Cable Accessories and Ancillary Products |
AC300-125 |
AC300-125 is 50 pcs package of twist lock splice connectors. Connector is designed to accommodate 14-22 AWG wire, providing safe and secure connection. Tough thermoplastic shell provides superior protection against environmental extremes. Fixed square-wire spring construction provides a secure connection that will not relax over time. Connector features a threaded funnel entry to guide wires into the connector. Deep gripping ribs and swept-back wings permit a higher torque. |
| Bulk Cable - Audio, Video and Data |
CB481-000 |
Low Voltage Power Cable - In some cases instead of using individual power supplies for each interface or DA, it is more economical to use a single power supply to power these units for ease of rack installation and to reduce the number of power strips required. Designed for low voltage power applications, the CB481-000 Series uses 18AWG wires and can distribute 10-12Amps of current at 12 to 24 volts. Two insulated conductors are provided in a zip configuration, which allows easy splitting of cable ends for connection to a power supply. A white strip marked on one connector make it simple to identify ends of the cable for long cable runs. The CB481-000 will power any of the Altinex stand alone products, and is designed to work with Altinex power supplies PS5581SM or PS5591SM. |
| Bulk Cable - Audio, Video and Data |
CB482-000 |
Control Cable - Designed to distribute control signals to other equipment, the CB482-000 series has 5 conductors and can be used to transmit control signals from relays, TTL signals or RS-232 signals. It is a perfect companion for the MT112-104 control card where it can perform any task from interfacing to retractable screen control, RS-232 control for projectors or IR control for VCRs and DVDs. the CB482-000 can also be used to connect control signals from Altinex MultiTouch panels RS-232 port to a MultiTasker control port.
|
| Connectors and Adaptors |
CT8206AC |
The CT8206AC BNC Crimp Connector is designed for use with bulk CB4200MR Series cables. Using a 4-part design, the CT8206AC provides a high quality Male BNC termination for the coaxial channels used in these cables. |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
Custom Cable |
Custom Cable |
| Video Cables and Assemblies |
RS02 |
RS232 Serial Transmit Cable, Crossover |
| Video Cables and Assemblies |
RS03 |
RS232 Serial Transmit Cable, Straight Thru |
| Video Cables and Assemblies |
TVM-AV1 |
Composite Video Cable |
| Connectors and Adaptors |
UDM-HD15RCA3 |
HD15 to 3x RCA Breakout Cable |
| View All Products |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
EX-50M |
The EX-50M is a 50' long XLR male to XLR female microphone cable for the PortaCom wired intercom systems |
| Audio Cables, Snakes, and Assemblies |
SC-50 |
50' Speaker Cable Extension for connecting powered systems to their unpowered companion. |
| Audio Cables, Snakes, and Assemblies |
SC-50EX |
Heavy-duty speaker cable (18-gauge stranded) with strain relief in a vinyl jacket, 1 male XLR connector and 1 female XLR connector. |
| Audio Cables, Snakes, and Assemblies |
SC-100NL |
100 ft. Cable w/ Neutrik Speakon Connectors - Connects XTR-6000 to XTR-6001 |
| Audio Cables, Snakes, and Assemblies |
SC-50NL |
50’ Speaker Cable Extension - Connects Liberty PLatinum to LIB-7501 and Explorer Pro to EXP-7501. |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Boxes - Floor, Table and Wall |
FB4-XLRF |
Atlas Sound FB4-XLRF floor box assembly provides a simple solution for recessed mic inputs. The unit is designed for easy installation into wood stages and platforms. |
| Cable Accessories and Ancillary Products |
SG-38GH |
Professional appearance with easy and cost-efficient installation is achieved by using Atlas Sound wall plates. Models include mounting holes on standard box mount center [3 9/32" (83mm)] and plate mounting hardware. |
| Cable Accessories and Ancillary Products |
SG-NL4MP-1 |
Single Gang Stainless Steel Plate with (1) NL4MP 4 pole connector Professional appearance with easy and cost-efficient installation is achieved by using Atlas Sound wall plates. |
| Cable Accessories and Ancillary Products |
SG-NL4MP-2 |
Single Gang Stainless Steel Plate with (2) NL4MP 4 pole connectors Professional appearance with easy and cost-efficient installation is achieved by using Atlas Sound wall plates. |
| Cable Accessories and Ancillary Products |
SG-QTRSL-F1 |
Single Gang Stainless Steel Plate with (1) Female Locking TRS connector Professional appearance with easy and cost-efficient installation is achieved by using Atlas Sound wall plates. |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Management Systems |
9230-X |
Conveniently conceals cables. Quick access is easy with a slam latch door. |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
AT700 |
AT700 premium speaker cables are available in 5', 10', 25' and 50' lengths. |
| Audio Cables, Snakes, and Assemblies |
AT700-Q |
AT700-Q premium speaker cables are available in 5', 10', 25' and 50' lengths. |
| Audio Cables, Snakes, and Assemblies |
AT8313 |
XLRF - XLRM balanced microphone cable. Available in 10', 25', and 50' lengths. |
| Audio Cables, Snakes, and Assemblies |
AT8390-0.5RR |
90° 1/4" - 90° 1/4" phone plug instrument cable. 0.5' length. |
| Audio Cables, Snakes, and Assemblies |
AT8314 |
XLRF-XLRM balanced microphone cable. Available in 1.5', 3', 6', 10', 15', 20', 25', 30', 50' and 100' lengths |
| View All Products |
| Subcategory |
Model |
Description |
| Fiber Optic Cable and Assemblies |
HDOC-HDMI |
This unique HDMI fiber optical cable system lets your digital display (Plasma TV, Digital Projectors, LCD Monitors, HDTV, etc) extend up to 326 ft. (100 meters) away from the digital video & audio source based on HDMI standard. |
| Fiber Optic Cable and Assemblies |
OBC-DVI |
This unique fiber optic cable system lets your digital display (Plasma TV, Digital Projectors, LCD Monitors, HDTV, etc) extend up to 328 ft. (100 meters) away from the video source based on Single link DVI standard. |
| Fiber Optic Cable and Assemblies |
OBDC-DVI |
This unique fiber optical cable system lets your digital display (Plasma TV, Digital Projectors, LCD Monitors, HDTV, etc) extend up to 328 ft. (100 meters) away from the video source based on Dual link DVI standard. |
| Video Cables and Assemblies |
CA0020-1 |
This cable can be used on our DIDO product which will breakout the DVI connector to DVI-D and VGA. |
| VGA, Communication and Data Cable and Assemblies |
CA0020-1 |
This cable can be used on our DIDO product which will breakout the DVI connector to DVI-D and VGA. |
| View All Products |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
4-pin Hirose |
Miscellaneous - 4-pin Hirose |
| Audio Cables, Snakes, and Assemblies |
Cable - MONO-to-MONO for WDR-P |
Cable - MONO-to-MONO for WDR-P |
| Audio Cables, Snakes, and Assemblies |
Cable - MP-1H (for 41BT, 51BT) |
Cable - MP-1H (for 41BT or 51BT |
| Audio Cables, Snakes, and Assemblies |
Cable - MX-1 |
Cable - MX-1 - balanced cable |
| Audio Cables, Snakes, and Assemblies |
Cable - MX-2 |
Cable - MX-2 - mini-to-dual XLR |
| View All Products |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
8451 |
Multi-Conductor - Single-Pair Cable |
| Audio Cables, Snakes, and Assemblies |
8718 |
Multi-Conductor - Single-Pair Cable |
| Audio Cables, Snakes, and Assemblies |
8719 |
Multi-Conductor - Single-Pair Cable |
| Audio Cables, Snakes, and Assemblies |
8720 |
Multi-Conductor - Single-Pair Cable |
| Audio Cables, Snakes, and Assemblies |
8760 |
Multi-Conductor - Shielded Twisted Pair Cable |
| View All Products |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
VCA-1 |
One VCA card for control of an input or output
|
| Cable Accessories and Ancillary Products |
VCA-1 |
One VCA card for control of an input or output
|
| Cable Accessories and Ancillary Products |
VCA-4 |
Package of four VCA cards |
| Connectors and Adaptors |
VCA-4 |
Package of four VCA cards |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
FPPCB |
Freestanding Cart Accessory Cable Bin |
| Cable Management Systems |
FPPCB |
Freestanding Cart Accessory Cable Bin |
| Subcategory |
Model |
Description |
| Camera Cable Assemblies |
28 |
Tally Box |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
ST |
The Audio Splitter helps solve classroom computer shortages by enabling two students to simultaneously work on computers equipped with only a single audio outlet. |
| Connectors and Adaptors |
AX-10 |
Eliminates the guessing of which connector is needed by supplying all the connectors necessary for multimedia systems in one package. |
| VGA, Communication and Data Cable and Assemblies |
AX-10 |
Eliminates the guessing of which connector is needed by supplying all the connectors necessary for multimedia systems in one package. |
| Cable Boxes - Floor, Table and Wall |
1285G |
The Sound Alert™ monaural jackbox visibly signals to students and teachers when the jackbox volume is louder than the American Speech-Language-Hearing Association's recommended 85dB level. |
| Subcategory |
Model |
Description |
| Video Cables and Assemblies |
LV-CA32 |
The LV-CA32 component cable connects various video components, and transmits analog video signals. 3RCA (female)-Dsub15 connectors. |
| Video Cables and Assemblies |
LV-CA29 |
The LV-CA29 is 6.6 foot long video cable compatible with 24-pin digital DVI connectors. |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
CMA290 |
Wire Suspension Locks |
| Subcategory |
Model |
Description |
| Video Cables and Assemblies |
VideoCG Y/C S-Video Cable |
The Y/C (S Video) cable allows S-Video connections on the LCG7000 and Ultimate Kits. |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
XLRJ-MPS -18INEXF |
18 Inch XLR Jack to Stereo 3.5mm Mini Plug Audio Cable |
| Connectors and Adaptors |
XLRJ-MPS -3EXF |
3 Feet XLR Jack to Stereo 3.5mm Mini Plug Audio Cable |
| Video Cables and Assemblies |
BBD1506-100B |
Premium Plenum Belden Digital Video assemblies for critical HDTV/SDI applications. Cable is manufactured using Canare or Kings connectors and Belden 1506A RG59 cable. |
| Video Cables and Assemblies |
BBD1506-10B |
Premium Plenum Belden Digital Video assemblies for critical HDTV/SDI applications. Cable is manufactured using Canare or Kings connectors and Belden 1506A RG59 cable. These assemblies exhibit extraordinary impedance consistency throughout the length of th |
| Video Cables and Assemblies |
BBD1506-150B |
Premium Plenum Belden Digital Video assemblies for critical HDTV/SDI applications. Cable is manufactured using Canare or Kings connectors and Belden 1506A RG59 cable. |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
W1114-XX-X-X |
Single Gang Wallplate with (1) HDMI Connector |
| Video Cables and Assemblies |
HDMI |
Standard Lengths - 1,2,3,5 (Meters) |
| Cable Accessories and Ancillary Products |
W1001-XX-X-X |
Single Gang Wall Plate with (1) Decora-Hole |
| Cable Accessories and Ancillary Products |
W1100-XX-X-X |
Single Gang Wall plate with (1) RF-TV Connector |
| Connectors and Adaptors |
W1100-XX-X-X |
Single Gang Wall plate with (1) RF-TV Connector |
| View All Products |
| Subcategory |
Model |
Description |
| Bulk Cable - Audio, Video and Data |
DM-CBL-NP |
Crestron DM-CBL-NP cable provides a high-performance, single-cable wiring solution for DigitalMedia (DM) systems. Within a single jacket, DM-CBL-NP contains one high-bandwidth/low-crosstalk shielded 4-twisted pair (STP) cable, one CAT5e unshielded 4-twisted pair (UTP) cable, and one DMNet cable.
The STP "Video Data" cable, which connects to the 'D' port of a DigitalMedia device, is of a specialized construction designed to allow the longest possible cable lengths* for transporting high-definition digital video and audio. The Cat5e "Data Management" cable, which connects to the 'M' port, carries high-speed Ethernet and other data, plus 5V DC power. Finally, the DMNet cable carries additional proprietary control signals and 24V DC power.
Wiring a DigitalMedia system using DM-CBL-NP is simple, requiring just one cable to be run to each DM receiver (i.e. Room Controller) and transmitter location*. Foot markers are printed on the outer jacket making it easy to determine the exact length of each cable run when commissioning the installed system.
Termination of a DM cable is accomplished using one standard RJ45 (not provided) for 'M', one detachable terminal block (provided with each DM device) for DMNet, and one Crestron DM-CONN shielded RJ45 (sold separately) for 'D'. The DM-CONN connector enables fast and reliable termination of the shielded twisted-pair cable without requiring any special tools.
|
| VGA, Communication and Data Cable and Assemblies |
DM-CBL-NP |
Crestron DM-CBL-NP cable provides a high-performance, single-cable wiring solution for DigitalMedia (DM) systems. Within a single jacket, DM-CBL-NP contains one high-bandwidth/low-crosstalk shielded 4-twisted pair (STP) cable, one CAT5e unshielded 4-twisted pair (UTP) cable, and one DMNet cable.
The STP "Video Data" cable, which connects to the 'D' port of a DigitalMedia device, is of a specialized construction designed to allow the longest possible cable lengths* for transporting high-definition digital video and audio. The Cat5e "Data Management" cable, which connects to the 'M' port, carries high-speed Ethernet and other data, plus 5V DC power. Finally, the DMNet cable carries additional proprietary control signals and 24V DC power.
Wiring a DigitalMedia system using DM-CBL-NP is simple, requiring just one cable to be run to each DM receiver (i.e. Room Controller) and transmitter location*. Foot markers are printed on the outer jacket making it easy to determine the exact length of each cable run when commissioning the installed system.
Termination of a DM cable is accomplished using one standard RJ45 (not provided) for 'M', one detachable terminal block (provided with each DM device) for DMNet, and one Crestron DM-CONN shielded RJ45 (sold separately) for 'D'. The DM-CONN connector enables fast and reliable termination of the shielded twisted-pair cable without requiring any special tools.
|
| Video Cables and Assemblies |
DM-CBL-NP |
Crestron DM-CBL-NP cable provides a high-performance, single-cable wiring solution for DigitalMedia (DM) systems. Within a single jacket, DM-CBL-NP contains one high-bandwidth/low-crosstalk shielded 4-twisted pair (STP) cable, one CAT5e unshielded 4-twisted pair (UTP) cable, and one DMNet cable.
The STP "Video Data" cable, which connects to the 'D' port of a DigitalMedia device, is of a specialized construction designed to allow the longest possible cable lengths* for transporting high-definition digital video and audio. The Cat5e "Data Management" cable, which connects to the 'M' port, carries high-speed Ethernet and other data, plus 5V DC power. Finally, the DMNet cable carries additional proprietary control signals and 24V DC power.
Wiring a DigitalMedia system using DM-CBL-NP is simple, requiring just one cable to be run to each DM receiver (i.e. Room Controller) and transmitter location*. Foot markers are printed on the outer jacket making it easy to determine the exact length of each cable run when commissioning the installed system.
Termination of a DM cable is accomplished using one standard RJ45 (not provided) for 'M', one detachable terminal block (provided with each DM device) for DMNet, and one Crestron DM-CONN shielded RJ45 (sold separately) for 'D'. The DM-CONN connector enables fast and reliable termination of the shielded twisted-pair cable without requiring any special tools.
|
| Video Cables and Assemblies |
DM-CBL-P |
Crestron DM-CBL-P cable provides a high-performance, single-cable wiring solution for DigitalMedia (DM) systems in a commercial plenum application. Within a single plenum-rated jacket, DM-CBL-P contains one high-bandwidth/low-crosstalk shielded 4-twisted pair (STP) cable, one CAT5e unshielded 4-twisted pair (UTP) cable, and one DMNet cable.
The STP "Video Data" cable, which connects to the 'D' port of a DigitalMedia device, is of a specialized construction designed to allow the longest possible cable lengths* for transporting high-definition digital video and audio. The Cat5e "Data Management" cable, which connects to the 'M' port, carries high-speed Ethernet and other data, plus 5V DC power. Finally, the DMNet cable carries additional proprietary control signals and 24V DC power.
Wiring a DigitalMedia system using DM-CBL-P is simple, requiring just one cable to be run to each DM receiver (i.e. Room Controller) and transmitter location*. Foot markers are printed on the outer jacket making it easy to determine the exact length of each cable run when commissioning the installed system.
Termination of a DM cable is accomplished using one standard RJ45 (not provided) for 'M', one detachable terminal block (provided with each DM device) for DMNet, and one Crestron DM-CONN shielded RJ45 (sold separately) for 'D'. The DM-CONN connector enables fast and reliable termination of the shielded twisted-pair cable without requiring any special tools.
|
| Bulk Cable - Audio, Video and Data |
DM-CBL-P |
Crestron DM-CBL-P cable provides a high-performance, single-cable wiring solution for DigitalMedia (DM) systems in a commercial plenum application. Within a single plenum-rated jacket, DM-CBL-P contains one high-bandwidth/low-crosstalk shielded 4-twisted pair (STP) cable, one CAT5e unshielded 4-twisted pair (UTP) cable, and one DMNet cable.
The STP "Video Data" cable, which connects to the 'D' port of a DigitalMedia device, is of a specialized construction designed to allow the longest possible cable lengths* for transporting high-definition digital video and audio. The Cat5e "Data Management" cable, which connects to the 'M' port, carries high-speed Ethernet and other data, plus 5V DC power. Finally, the DMNet cable carries additional proprietary control signals and 24V DC power.
Wiring a DigitalMedia system using DM-CBL-P is simple, requiring just one cable to be run to each DM receiver (i.e. Room Controller) and transmitter location*. Foot markers are printed on the outer jacket making it easy to determine the exact length of each cable run when commissioning the installed system.
Termination of a DM cable is accomplished using one standard RJ45 (not provided) for 'M', one detachable terminal block (provided with each DM device) for DMNet, and one Crestron DM-CONN shielded RJ45 (sold separately) for 'D'. The DM-CONN connector enables fast and reliable termination of the shielded twisted-pair cable without requiring any special tools.
|
| View All Products |
| Subcategory |
Model |
Description |
| VGA, Communication and Data Cable and Assemblies |
CA 2066 |
6 pin to 6 pin IEEE/1394 DV Cables |
| Connectors and Adaptors |
CB-2 |
One S-Video to two BNC cable adapter with length 0.3m (1 ft) |
| Connectors and Adaptors |
CB-8 |
Miniphono to 5-pin male XLR adapter woth length 0.3m (1 ft) |
| Connectors and Adaptors |
CB-10 |
4xBNC component cable with length 9.8 ft (3 m) |
| Video Cables and Assemblies |
CA 1066 |
6-pin M/M Firewire with length 10 m (30 ft) |
| View All Products |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
dB10 |
At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didn’t settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally there’s a direct box worthy of the dbx name.
Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source. Both boxes include a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic'd sound.
As a professional, you don’t have time for interference, so we’ve included a ground lift switch to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the box from being dragged around the stage, and the unique contoured underside allows secure stacking of multiple units. |
| Cable Accessories and Ancillary Products |
dB12 |
At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didn’t settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally there’s a direct box worthy of the dbx name.
Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source. Both boxes include a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic'd sound.
As a professional, you don’t have time for interference, so we’ve included a ground lift switch to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the box from being dragged around the stage, and the unique contoured underside allows secure stacking of multiple units. |
| Subcategory |
Model |
Description |
| VGA, Communication and Data Cable and Assemblies |
AT-72061 |
RS-232 Extension Cable 32.8' ( 10M ) |
| Video Cables and Assemblies |
AH-98771 |
Component Video Cable (3 RCA to HD15) Cable |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
UCC1 |
The UCC1 USB-CAN Converter is a bi-directional USB-to-CAN interface for connecting PC or Notebook computers to Electro-Voice devices. |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
VIP-100 |
The VIP-100 is a two gang Decora wallplate containing a CI–5BWPA computer video with stereo audio interfac and a VWP-SVA S-video/Composite video with stereo audio interface. |
| Cable Accessories and Ancillary Products |
RFL4.5-D2G |
The model RFL4.5-D2G is constructed of all steel, including the carpet rim to safely handle the rigors of a floor environment. |
| Cable Boxes - Floor, Table and Wall |
RFL4.5-D1G |
The model RFL4.5-D1G is constructed of all steel, including the carpet rim to safely handle the rigors of a floor environment. |
| Cable Boxes - Floor, Table and Wall |
RFL3-D1G |
The model RFL3-D1G is constructed of all steel, including the carpet rim to safely handle the rigors of a floor environment. |
| Cable Accessories and Ancillary Products |
RFL4.5-Q2G |
The model RFL4.5-Q2G is constructed of all steel, including the carpet rim to safely handle the rigors of a floor environment. |
| View All Products |
| Subcategory |
Model |
Description |
| Bulk Cable - Audio, Video and Data |
ADP-1520 |
Parts and Accessories |
| Subcategory |
Model |
Description |
| VGA, Communication and Data Cable and Assemblies |
CAB-VGA-XXX |
SVGA TO SVGA cables -- 6 foot to 50 foot (M-M and M-F). SVGA or VGA extension cables with HD15 connectors on both ends. |
| VGA, Communication and Data Cable and Assemblies |
EXT-VGA-145 |
One VGA Input, Four VGA Outputs
|
| Audio Cables, Snakes, and Assemblies |
EXT-AUD-1000 |
Extends L/R analog audio up to 1000 feet away from a computer using one CAT5 cable. |
| Cable Accessories and Ancillary Products |
EXT-PS2-100 |
Extends your PS/2 keyboard, and mouse up to 1000 feet
|
| VGA, Communication and Data Cable and Assemblies |
EXT-VGA-2-DVISP |
Converts analog VGA video to digital DVI/HDMI video with Aspect Ratio Control. |
| View All Products |
| Subcategory |
Model |
Description |
| Video Cables and Assemblies |
ALCO-ST |
Our 50 Ohm coaxial lines consist of two concentric conductors, insulated from each other by air or gas. |
| Video Cables and Assemblies |
ALCU-DF |
Our 50 Ohm coaxial lines consist of two concentric conductors, insulated from each other by air or gas. |
| Video Cables and Assemblies |
ALCU-ST |
Our 50 Ohm coaxial lines consist of two concentric conductors, insulated from each other by air or gas. |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
UU-150-4 |
The UU150-4 is a USB 1.1 over Category 5/5e/6 USB extender with a 4-port Hub built into the remote unit. |
| VGA, Communication and Data Cable and Assemblies |
UU-150-4 |
The UU150-4 is a USB 1.1 over Category 5/5e/6 USB extender with a 4-port Hub built into the remote unit. |
| VGA, Communication and Data Cable and Assemblies |
USB-RS232-1 |
Allows connection of any device with an RS-232(DB9) port to a USB port on your PC or Notebook. Operates up to 500Kbps.
|
| Connectors and Adaptors |
USB-RS232-1 |
Allows connection of any device with an RS-232(DB9) port to a USB port on your PC or Notebook. Operates up to 500Kbps.
|
| Connectors and Adaptors |
USB-EXT-16 |
USB Active Extension Cable to 16 ft(5 meters) |
| View All Products |
| Subcategory |
Model |
Description |
| Camera Cable Assemblies |
VC-P894U |
This model VC-P894U is a Macintosh Cable for KY-F55B,KY-F32U. |
| Video Cables and Assemblies |
VC-452-4U |
This model VC-452-4U is a 9 pin to 9 pin RGB cable (4 meters). |
| Camera Cable Assemblies |
VC-P892U |
This model VC-P892U is a Macintosh Cable For KY19/D29/D29W. |
| Camera Cable Assemblies |
VC-G7050U |
This model VC-G7050U is a 45p-45p VTR Cable for RM-G860U. |
| Camera Cable Assemblies |
VC-P482U |
This model VC-P482U is a VTR Cable For Y/C VCR (26p-14p, 2m). |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Boxes - Floor, Table and Wall |
VPM-2 |
XGA Line Driver/Wall Plate Interface |
| Cable Boxes - Floor, Table and Wall |
WX-2F |
Female VGA to Female VGA Wall Plate Adapter |
| Cable Boxes - Floor, Table and Wall |
WX-2M |
Male VGA to Male VGA Wall Plate Adapters |
| Cable Boxes - Floor, Table and Wall |
WD-2M |
Male DB-9 to Male DB-9 connection module |
| Cable Boxes - Floor, Table and Wall |
WX-F5B |
An HD-15 connector to 5 BNC |
| View All Products |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
XLR8 |
Provides standard balanced XLR jacks for eight inputs and the outputs of the AM8 and AM8TC mixers. Unbalanced RCA outputs also provided on two jacks. |
| Subcategory |
Model |
Description |
| Cable Boxes - Floor, Table and Wall |
LST-4100B |
IP Interface Module |
| Cable Boxes - Floor, Table and Wall |
RJP-101M |
Auto-Sensing Remote Jack Pack |
| Cable Boxes - Floor, Table and Wall |
RJP-101ML |
Auto-Sensing Remote Jack Pack |
| Cable Boxes - Floor, Table and Wall |
RJP-110F |
Auto-Sensing Remote Jack Pack (Black) |
| Cable Boxes - Floor, Table and Wall |
RJP-110FW |
Auto-Sensing Remote Jack Pack (White) |
| View All Products |
| Subcategory |
Model |
Description |
| Bulk Cable - Audio, Video and Data |
EC 4000-02 |
Extension cable, designed to connect the central control unit to conference units or to interconnect delegate units when the standard 6.6 ft. (2 m) cable affixed to the conference unit is not long enough. |
| Bulk Cable - Audio, Video and Data |
EC 4000-05 |
Extension cable, designed to connect the central control unit to conference units or to interconnect delegate units when the standard 6.6 ft. |
| Bulk Cable - Audio, Video and Data |
EC 4000-10 |
Extension cable, designed to connect the central control unit to conference units or to interconnect delegate units when the standard 6.6 ft. (2 m) cable affixed to the conference unit is not long enough. |
| Bulk Cable - Audio, Video and Data |
EC 4000-20 |
Extension cable, designed to connect the central control unit to conference units or to interconnect delegate units when the standard 6.6 ft. (2 m) cable affixed to the conference unit is not long enough. |
| Bulk Cable - Audio, Video and Data |
EC 4006-03 |
A 6 pin XLR to D-sub HD15 cable for the HM 4042 Handheld Microphone that connects the handheld microphone to the MU 4040 or MU 604x C/D. |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Management Systems |
L267-61 |
Cabinet 61Panel Space 35RU 27D 1pr adjustable rails vented rear door 10RUtop+panels - No front door |
| Cable Management Systems |
CLB-32 |
Cable lacing bar 32L x 2.625W |
| Cable Management Systems |
LCMD-1H |
Cable organizer 1RU 5D horizontal 1.625W |
| Cable Management Systems |
LCMD-2H |
Cable organizer 2RU 5D horizontal 3.25W |
| Cable Management Systems |
LCMP |
Cable panel slotted 19W x .625H Ten Pack |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Management Systems |
HCM-1 |
Horizontal Cable Manager |
| Cable Management Systems |
HCM-2DV |
Horizontal Cable Manager |
| Cable Management Systems |
HCM-1D |
Horizontal Cable Manager |
| Cable Management Systems |
HCM-1DV |
Horizontal Cable Manager |
| Cable Management Systems |
HCM-2D |
Horizontal Cable Manager |
| View All Products |
| Subcategory |
Model |
Description |
| Video Cables and Assemblies |
0SU51078 |
Platform-specific Minicom ROC(Remote Interface Connection on Cable) to support PS/2, SUN, and USB. |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
AEA-1 |
XLR Audio Breakout Panel for VAS-1000, Grass Valley TEX XL & Compatibles |
| Connectors and Adaptors |
AIA-8550 1RU |
Audio Interface Adapter adapt the audio screw terminals of the Grass Valley 8550 and 8560 Audio Distribution Trays to XLR connectors. |
| Connectors and Adaptors |
AIA-880 2RU |
XLR Audio Break-out Panel adapt the audio screw terminals of the Leitch™ FR-883 and FR-884 Audio Distribution Trays to XLR connectors using the Multidyne™ AIA-880 XLR Break-out Panel. |
| Connectors and Adaptors |
DAI-8550 |
DAI-8550 for DA interface board, screw terminal to ribbon cable adapter (requires 8) |
| Connectors and Adaptors |
DAI-880 |
XLR Audio Break-out Panel adapt the audio screw terminals of the Leitch™ FR-883 and FR-884 Audio Distribution Trays to XLR connectors using the Multidyne™ AIA-880 XLR Break-out Panel. |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Management Systems |
CMKPRO |
A modular wall cable management system for hiding wires. |
| Cable Management Systems |
CMKPRO90 |
Cable management elbows for use with CMKPRO. |
| Cable Management Systems |
CMKPROMINI |
A modular wall cable management system for hiding wires. |
| Cable Management Systems |
CMKPROMINI90 |
Cable management elbows for use with CMKPROMINI. |
| Cable Boxes - Floor, Table and Wall |
SB.5R |
The SB.5R offers an in-wall solution perfect for wiring behind ultra low profile mounts. |
| View All Products |
| Subcategory |
Model |
Description |
| VGA, Communication and Data Cable and Assemblies |
BT-CS80G |
Cable kit: 20 pin to 1 5 pin and 4 pin HRS to 4 pin XLR |
| Video Cables and Assemblies |
SHAN-C12TCA |
12 Pin Cable Assembly to (2) RCA female and (2) BNC connectors |
| Video Cables and Assemblies |
C500-004 |
Split Male Bibber Bulkhead |
| Video Cables and Assemblies |
C500-006 |
Split Female Bibber Bulkhead |
| Video Cables and Assemblies |
CAE1800DCB |
DC Power/Control Break-out Cable for use with AK-HC1800G. |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Boxes - Floor, Table and Wall |
Wall Plate (1) D3F |
Single Gang Custom Wall Plate |
| Cable Boxes - Floor, Table and Wall |
Wall Plate (2) D3F |
Single Gang Custom Wall Plate |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
PCC |
Easily hide cables and cords and blend the cable management channel into the mounting surface with color choices of silver, black or versatile white that is easily paintable to any desired color. |
| Cable Boxes - Floor, Table and Wall |
IBA1 |
The In-Wall Box snugly fits between 16” wood studs and features a removable outlet receptacle that makes running electrical and cables through the box easily. |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
DS-BNC |
BNC Jack on D Plate - Solder type |
| Cable Accessories and Ancillary Products |
DS-BNC-D |
Insulated Double BNC Jack on D Plate |
| Cable Accessories and Ancillary Products |
DS-PHN1 |
Single Phono Jack on D Plate - Solder type |
| Cable Accessories and Ancillary Products |
DS-PHN2 |
Dual Phono Jacks on D Plate - Solder type |
| Cable Accessories and Ancillary Products |
RCX-A2S |
The RCX-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source. |
| View All Products |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
SL 1 |
Scratch LIVE is the ultimate software and hardware solution for bridging the analog world of vinyl and the digital world of computer audio files. |
| Connectors and Adaptors |
SL 3 |
Advanced 24-Bit USB 2.0 Interface for Professional DJs |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
CBLD |
Cable depot holds 30 cables |
| Cable Accessories and Ancillary Products |
CPSW |
Pan head/captive, washers attached |
| Cable Accessories and Ancillary Products |
CT 100-4 |
4" cable ties; 100 pieces per bag; black. |
| Cable Accessories and Ancillary Products |
CT 100-8 |
8" cable ties; 100 pieces per bag; black. |
| Cable Accessories and Ancillary Products |
CT 100-8R |
8" reusable cable ties; 100 pieces per bag; black. |
| View All Products |
| Subcategory |
Model |
Description |
| Fiber Optic Cable and Assemblies |
XtendView FiberDVI |
RGB Spectrum's XtendView® FiberDVI is a compact single fiber DVI cabling solution for distances up to 1000'. FiberDVI consists of transmit and receive plug-in modules, with industry standard SC type jacks for easy connection of the fiber. |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
SWC-DB9-XLR |
The SWC-DB9-XLR is an Audio Control Snake cables with RS232 to XLR connectors. |
| Audio Cables, Snakes, and Assemblies |
SWC-BNC-XLR |
The SWC-BNC-XLR is a Sync Adaptor Cable with AES3 to BNC connectors. |
| Cable Accessories and Ancillary Products |
SWATNC-MCA |
The SWATNC-MCA is a 2.4 GHz TNC Male Crimp Connector. |
| Bulk Cable - Audio, Video and Data |
SWCPOWR-EXT |
The SWCPOWR-EXT is a 3 meter charger extension DC cable. |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
Tourtek Instrument Cables |
Instrument Cables |
| Audio Cables, Snakes, and Assemblies |
Tourtek Mic Cables |
Microphone Cables |
| Audio Cables, Snakes, and Assemblies |
Tourtek Speaker Cables |
Speaker Cables |
| Audio Cables, Snakes, and Assemblies |
MC18 |
18-foot low noise microphone cable with heavy duty XLR connectors. |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
C98D |
Replacement Cable for Beta 91, Beta 98 Microphones
|
| Connectors and Adaptors |
UA221 |
The Shure UA221 Antenna Splitter/Combiner Kit includes two adapters that can be used as one-input, two-output or two-input, one-output passive antenna splitter/combiners for UC4, SLX4, ULXS4, ULXP4, U4S and U4D receivers. |
| Audio Cables, Snakes, and Assemblies |
C25B |
25-foot Heavy-Duty Cable, Black XLR Connector on Microphone End |
| Audio Cables, Snakes, and Assemblies |
C25E |
25-foot TRIPLE-FLEX® Cable, Black XLR Connector on Microphone End |
| Audio Cables, Snakes, and Assemblies |
C25F |
25-foot TRIPLE-FLEX® Cable, Chrome XLR Connectors |
| View All Products |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
USB-XT |
16' (5 m) USB Active Extension Cable for SBA USB audio system |
| Cable Accessories and Ancillary Products |
CAT5-XT |
Cat 5 to USB Extender for SMART Board 600 Series Interactive Whiteboards |
| Cable Accessories and Ancillary Products |
SYSON6-NA |
SystemOn Expansion Module for SMART Board 600 series Interactive Whiteboards (U.S. and Canada only) |
| Cable Accessories and Ancillary Products |
RS232-NA |
Serial conversion module for SMART Board™ 600 series (North America) |
| Cable Accessories and Ancillary Products |
USB-GW |
The GoWire™ cable contains SMART Board™ software and launches it automatically, providing full access to all software tools. |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
IQCRSAD |
The IQCRSAD is an RS422 to RS232 adapter used for interfacing a laptop/PC to the RolICall RS422 serial port of an 10 enclosure. The serial connection speed is 38.4 kbitls.
|
| Subcategory |
Model |
Description |
| Video Cables and Assemblies |
SMF700 |
Monitor Interface Cable for BKM-15R and BVM-A Series. Allows power for BKM-15R to be drawn from BVM-A series monitor |
| Connectors and Adaptors |
BKM320D |
4:2:2 Sdi Input Adapter |
| Connectors and Adaptors |
BKM320D |
4:2:2 Sdi Input Adapter |
| Connectors and Adaptors |
BKM220D |
4:2:2 SDI Input Adapter for LMD170WS and LMD230WS monitors. |
| Connectors and Adaptors |
BKM220D |
4:2:2 SDI Input Adapter for LMD170WS and LMD230WS monitors. |
| View All Products |
| Subcategory |
Model |
Description |
| Video Cables and Assemblies |
DVIDDMF6 |
6 ft DVI Dual-Link Extension Cable M/F |
| Video Cables and Assemblies |
DVIDDMF10 |
10 ft DVI Dual-Link Extension Cable M/F |
| Video Cables and Assemblies |
DVIDDMM6 |
6 ft DVI Dual-Link Cable M/M |
| Video Cables and Assemblies |
DVIDDMM10 |
10 ft DVI Dual-Link Cable M/M |
| Video Cables and Assemblies |
DVIDDMM15 |
15 ft DVI Dual-Link Cable M/M |
| View All Products |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
ADB-1 |
The ADB-1 allows a Hi-Z unbalanced source to directly feed to Lo-Z balanced input. Musical instruments, tape recorders, VCRs and sound projectors can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality. The ADB-1 operates on either phantom power or a 9-volt battery. Features: flat response, low distortion, low noise, wide dynamic range (input will handle up to 6v P-P in instrument position; up to 400w RMS in speaker position when used in parallel with an amplifier load), no transformer, RF protection on input and output, switch able ground isolation, flush mounted slide switches minimize accidental switching and resist breakage, switches and markings on top of unit, full two-year warranty, designed and manufactured in the USA.
|
| Cable Accessories and Ancillary Products |
ADB-4 |
Four channel active direct box from Stewart Audio. It features an XLR output on all four channels, with a +4 dB or -30 dB input level switch. The rear panel also has an additional input or link 1/4" connector, with a -20 or +20 dB level sensitivity selector switch and a two-position ground lift switch on each of the channels. For live performance and studio use.
|
| Cable Accessories and Ancillary Products |
BPS-1 |
Battery-Powered Phantom Power Supply for Condenser Mics The BPS-1 is a battery powered, +48v phantom power supply designed for applications where AC powered units would not be practical. |
| Cable Accessories and Ancillary Products |
PM-1 |
The Stewart PM1 provides the most consistent excellence of all phantom power supplies. The Stewart PM1 power supply system delivers a true +48V to microphones, direct boxes or any other devices requiring phantom power. Delivers up to 10mADC per channel and features individual regulation and short circuit protection for each channel, very low noise and crosstalk and isolated outputs which protect other equipment. Provides 450mA at 24VAC from a 120VAC line, includes a PS1 Power Supply. Single 40V module with PS-1; 3 lbs.
|
| Cable Accessories and Ancillary Products |
PM-2 |
Stewart PM-2 units have provided the most consistent excellence of all phantom power supplies. These power supply systems deliver a true +48V to microphones, direct boxes or any other devices requiring phantom power. The PM-2 delivers up to 10mADC per channel and features individual regulation and short circuit protection for each channel, very low noise and crosstalk and isolated outputs which protect other equipment.
|
| View All Products |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
XLR-Male |
Six inch cable features a male XLR on one end and a Euro connector on the other.
|
| Connectors and Adaptors |
XLR-Male |
Six inch cable features a male XLR on one end and a Euro connector on the other.
|
| Connectors and Adaptors |
XLR-Female |
Six inch cable features a female XLR on one end and a Euro connector on the other.
|
| Audio Cables, Snakes, and Assemblies |
XLR-Female |
Six inch cable features a female XLR on one end and a Euro connector on the other.
|
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
US-122L |
The follow-up to our mega popular US-122, the new US-122L delivers everything you'd want in a portable audio/MIDI interface. |
| Connectors and Adaptors |
US-144 |
The follow-up to our mega popular US-122, the new US-144 delivers everything you'd want in a portable audio/MIDI interface and more. |
| Camera Cable Assemblies |
US-100 |
TASCAM's US-100 breaks the price barrier for great-quality recording into your computer. |
| Subcategory |
Model |
Description |
| Cable Accessories and Ancillary Products |
85-0008 |
TecNec BNC Removal Tool |
| Video Cables and Assemblies |
CVDA-CVDA-2 |
HDTV Component Video With Toslink Digital Audio Cables |
| Video Cables and Assemblies |
FS-FS-3 |
Screw On F Cable 3ft |
| Video Cables and Assemblies |
H16M-H16F-7 |
16pin M-F Mini Camera Cable 7 ft. |
| Camera Cable Assemblies |
LANC-6F |
Sony Equivalent LANC Control Cable 6ft |
| View All Products |
| Subcategory |
Model |
Description |
| Video Cables and Assemblies |
CA-ITV-DIN-6 |
Cable Control Panel to Camera 6' |
| Video Cables and Assemblies |
CA-ITV-DIN-25 |
Cable Control Panel to Camera 25' |
| Video Cables and Assemblies |
CA-ITV-D-25 |
Cable-EXT 25' CP-ITV/PT CAM |
| Video Cables and Assemblies |
CA-ITV-D-50 |
Cable-EXT 50' CP-ITV/PT CAM |
| Video Cables and Assemblies |
CA-ITV-D-100 |
Cable-EXT 100' CP-ITV/PT CAM |
| View All Products |
| Subcategory |
Model |
Description |
| Audio Cables, Snakes, and Assemblies |
YR-700 |
Extension Cable allows remote location of TS-700 system controller in fixed installations to a distance of 32.8 feet, (10 m). |
| Subcategory |
Model |
Description |
| VGA, Communication and Data Cable and Assemblies |
23368818-B |
10ft Projector RGB Cable |
| Cable Accessories and Ancillary Products |
23372148-B |
Toshiba 12' Projector Universal Replacement Power Cable |
| Cable Accessories and Ancillary Products |
BELC30 |
30-foot component video cable for Toshiba projectors |
| Cable Accessories and Ancillary Products |
BELRCA12 |
12-foot S-video cable for Toshiba projectors |
| Cable Accessories and Ancillary Products |
BELRCA50 |
50-foot RCA audio cable for Toshiba projectors |
| View All Products |
| Subcategory |
Model |
Description |
| Connectors and Adaptors |
AD1 |
1' long, 16 gauge speaker cable with MDP dual banana plug on one end, #121 female 1/4" jack on the other. |
| Connectors and Adaptors |
AD3 |
10' extension cables with 1/4" phone plug wired via an Accusonic+1 single conductor shielded cable to a female 1/4" jack |
| Connectors and Adaptors |
STF |
1/4" TRS wired to a female XLR. The tip is wired to pin 2. |
| Connectors and Adaptors |
STM |
1/4" TRS wired to a male XLR. The tip is wired to pin 2. |
| Audio Cables, Snakes, and Assemblies |
Concert 40 |
The Whirlwind Concert Series mic splitting systems include the most requested options for splitter boxes and panels for concert audio. |
| View All Products |
| Subcategory |
Model |
Description |
| Bulk Cable - Audio, Video and Data |
WCA 008 50 |
RG59 Coaxial cable, 50ft. with F-connectors, hardware |